Generate Platonic solids, Archimedian solids, Catalan polyhedra, the trapezohedron, and some stellated polyhedra. You can also stellate any of the polyhedra, select polyhedra by their characterics and position objects on polyhedra faces.

To use, add the following lines to the beginning of your file:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>

1. Section: Polyhedra
   • regular_polyhedron() – Creates a regular polyhedron with optional rounding. ^[Geom]
   • regular_polyhedron_info() – Returns info used to create a regular polyhedron.

Synopsis: Creates a regular polyhedron with optional rounding. ^[Geom]

Topics: Polyhedra, Shapes, Parts

See Also: regular_polyhedron_info()

Usage: Selecting a polyhedron

• regular_polyhedron([name],[index=],[type=],[faces=],[facetype=],[hasfaces=],...) [CHILDREN];

Usage: Controlling the size and position of the polyhedron

• regular_polyhedron(..., [or=|r=|d=],[ir=],[mr=],[side=],[facedown=],[anchor=], ...) [CHILDREN];]

Usage: Other options that change the polyhedron or handling of children

• regular_polyhedron(..., [draw=], [rounding=], [stellate=], [repeat=], [rotate_children=]) [CHILDREN];

Usage: options only for the trapezohedron

• regular_polyhedron("trapezohedron", [longside=],[h=], ...) [CHILDREN];

Description:

Creates a regular polyhedron with optional rounding. Children are placed on the polyhedron's faces. (Note that this is not attachable.) The regular_polyhedron module knows about many different regular and semi-regular polyhedra. You can refer to them by name. The complete list with their names appears below in the examples. You can also search the polyhedra for ones that meet various critera using type=, faces=, facetype= or hasfaces=. This will result in a list of polyhedra in a canonical order that might include several options. By default if you give specifications that produce several polyhedra, the first one will be returned. You can use the index= argument to select others from your list of hits. Examples of polyhedron selection appear after the full list of polyhedra below.

Selecting the polyhedron: You constrain the polyhedra list by specifying different characteristics, that must all be met

• name: e.g. "dodecahedron" or "pentagonal icositetrahedron". The name fully identifies the polyhedron, so no other characteristic should be given.
• type: Options are "platonic", "archimedean" and "catalan"
• faces: The required number of faces
• facetype: The required face type(s). List of vertex counts for the faces. Exactly the listed types of faces must appear:
  • facetype = 3: polyhedron with all triangular faces.
  • facetype = [5,6]: polyhedron with only pentagons and hexagons. (Must have both!)
• hasfaces: The list of vertex counts for faces; at least one listed type must appear:
  • hasfaces = 3: polygon has at least one triangular face
  • hasfaces = [5,6]: polygon has a hexagonal or a pentagonal face

The result is a list of selected polyhedra. You then specify index to choose which one of the remaining polyhedra you want. If you don't give index the first one on the list is created. Two examples:

• faces=12, index=2: Creates the 3rd solid with 12 faces
• type="archimedean", faces=14: Creates the first archimedean solid with 14 faces (there are 3)

Choosing the size of your polyhedron: The default is to create a polyhedron whose smallest edge has length 1. You can specify the smallest edge length with the size option. Alternatively you can specify the size of the inscribed sphere, midscribed sphere, or circumscribed sphere using ir, mr and cr respectively. If you specify cr=3 then the outermost points of the polyhedron will be 3 units from the center. If you specify ir=3 then the innermost faces of the polyhedron will be 3 units from the center. For the platonic solids every face meets the inscribed sphere and every corner touches the circumscribed sphere. For the Archimedean solids the inscribed sphere will touch only some of the faces and for the Catalan solids the circumscribed sphere meets only some of the corners.

Orientation: Orientation is controled by the facedown parameter. Set this to false to get the canonical orientation. Set it to true to get the largest face oriented down. If you set it to a number the module searches for a face with the specified number of vertices and orients that face down.

Rounding: If you specify the rounding parameter the module makes a rounded polyhedron by first creating an undersized model and then expanding it with minkowski(). This only produces the correct result if the in-sphere contacts all of the faces of the polyhedron, which is true for the platonic, the catalan solids and the trapezohedra but false for the archimedean solids.

Children: The module places children on the faces of the polyhedron. The child coordinate system is positioned so that the origin is the center of the face. If rotate_children is true (default) then the coordinate system is oriented so the z axis is normal to the face, which lies in the xy plane. If you give repeat=true (default) the children are cycled through to cover all faces. With repeat=false each child is used once. You can specify draw=false to suppress drawing of the polyhedron, e.g. to use for difference() operations. The module sets various parameters you can use in your children (see the side effects list below).

Stellation: Technically stellation is an operation of shifting the polyhedron's faces to produce a new shape that may have self-intersecting faces. OpenSCAD cannot handle self-intersecting faces, so we instead erect a pyramid on each face, a process technically referred to as augmentation. The height of the pyramid is given by the stellate argument. If stellate is false or 0 then no stellation is performed. Otherwise stellate gives the pyramid height as a multiple of the edge length. A negative pyramid height can be used to perform excavation, where a pyramid is removed from each face.

Special Polyhedra: These can be selected only by name and may require different parameters, or ignore some standard parameters.

• Trapezohedron: a family of solids with an even number of kite shaped sides. One example of a trapezohedron is the d10 die, which is a 10 face trapezohedron. You must specify exactly two of side, longside, h (or height), and r (or d). You cannot create trapezohedron shapes using mr, ir, or or.

  • side: Length of the short side.
  • longside: Length of the long side that extends to the apex.
  • h or height: Distance from the center to the apex.
  • r: Radius of the polygon that defines the equatorial vertices.
  • d: Diameter of the polygon that defines the equatorial vertices.

• Named stellations: various polyhedra such as three of the four Kepler-Poinsot solids are stellations with specific pyramid heights. To make them easier to generate you can specify them by name. This is equivalent to giving the name of the appropriate base solid and the magic stellate parameter needed to produce that shape. The supported solids are:

  • "great dodecahedron"
  • "small stellated dodecahedron"
  • "great stellated dodecahedron"
  • "small triambic icosahedron" (not a Kepler-Poinsot solid)

Arguments:

Side Effects:

• $faceindex - Index number of the face
• $face - Coordinates of the face (2d if rotate_children==true, 3d if not)
• $center - Face center in the child coordinate system

Example 1: All of the available polyhedra by name in their native orientation

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("tetrahedron", facedown=false);

Example 2:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("cube", facedown=false);

Example 3:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("octahedron", facedown=false);

Example 4:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("dodecahedron", facedown=false);

Example 5:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("icosahedron", facedown=false);

Example 6:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated tetrahedron", facedown=false);

Example 7:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated octahedron", facedown=false);

Example 8:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated cube", facedown=false);

Example 9:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated icosahedron", facedown=false);

Example 10:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated dodecahedron", facedown=false);

Example 11:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("cuboctahedron", facedown=false);

Example 12:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("icosidodecahedron", facedown=false);

Example 13:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("rhombicuboctahedron", facedown=false);

Example 14:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("rhombicosidodecahedron", facedown=false);

Example 15:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated cuboctahedron", facedown=false);

Example 16:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated icosidodecahedron", facedown=false);

Example 17:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("snub cube", facedown=false);

Example 18:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("snub dodecahedron", facedown=false);

Example 19:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("triakis tetrahedron", facedown=false);

Example 20:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("tetrakis hexahedron", facedown=false);

Example 21:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("triakis octahedron", facedown=false);

Example 22:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("pentakis dodecahedron", facedown=false);

Example 23:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("triakis icosahedron", facedown=false);

Example 24:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("rhombic dodecahedron", facedown=false);

Example 25:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("rhombic triacontahedron", facedown=false);

Example 26:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("deltoidal icositetrahedron", facedown=false);

Example 27:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("deltoidal hexecontahedron", facedown=false);

Example 28:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("disdyakis dodecahedron", facedown=false);

Example 29:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("disdyakis triacontahedron", facedown=false);

Example 30:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("pentagonal icositetrahedron", facedown=false);

Example 31:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("pentagonal hexecontahedron", facedown=false);

Example 32:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("trapezohedron",faces=10, side=1, longside=2.25, facedown=false);

Example 33:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("great dodecahedron");

Example 34:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("small stellated dodecahedron");

Example 35:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("great stellated dodecahedron");

Example 36:

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("small triambic icosahedron");

Example 37: Third Archimedean solid

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron(type="archimedean", index=2);

Example 38: Solids that have at least one face with either 8 vertices or 10 vertices

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
N = len(regular_polyhedron_info("index set", hasfaces=[8,10]));
for(i=[0:N-1]) right(3*i)
  regular_polyhedron(hasfaces=[8,10], index=i, mr=1);

Example 39: Solids that include a quadrilateral face

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
N = len(regular_polyhedron_info("index set", hasfaces=4));
for(i=[0:N-1]) right(3*i)
  regular_polyhedron(hasfaces=4, index=i, mr=1);

Example 40: Solids with only quadrilateral faces

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
N = len(regular_polyhedron_info("index set", facetype=4));
for(i=[0:N-1]) right(3*i)
  regular_polyhedron(facetype=4, index=i, mr=1);

Example 41: Solids that have both pentagons and hexagons and no other face types

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
N = len(regular_polyhedron_info("index set", facetype=[5,6]));
for(i=[0:N-1]) right(3*i)
  regular_polyhedron(facetype=[5,6], index=i, mr=1);

Example 42: Rounded octahedron

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("octahedron", side=1, rounding=.2);

Example 43: Rounded catalon solid

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("rhombic dodecahedron", side=1, rounding=0.2);

Example 44: Rounded Archimedean solid compared to unrounded version. The small faces are shifted back from their correct position.

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
%regular_polyhedron(type="archimedean", mr=1, rounding=0);
regular_polyhedron(type="archimedean", mr=1, rounding=0.3);

Example 45: Two children are distributed arbitrarily over the faces

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron(faces=12,index=2,repeat=true) {
  color("red") sphere(r=.1);
  color("green") sphere(r=.1);
}

Example 46: Difference the children from the polyhedron; children depend on $faceindex

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
difference(){
  regular_polyhedron("tetrahedron", side=25);
  regular_polyhedron("tetrahedron", side=25,draw=false)
    down(.3) linear_extrude(height=1)
      text(str($faceindex),halign="center",valign="center");
}

Example 47: With rotate_children you can control direction of the children.

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron(name="tetrahedron", anchor=UP, rotate_children=true)
  cylinder(r=.1, h=.5);
right(2) regular_polyhedron(name="tetrahedron", anchor=UP, rotate_children=false)
  cylinder(r=.1, h=.5);

Example 48: Using $face you can have full control of the construction of your children. This example constructs the Great Icosahedron, the one Kepler-Poinsot solid that cannot be made directly with regular_polyhedron().

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
module makestar(pts) {    // Make a star from a point list
    polygon(
      [
        for(i=[0:len(pts)-1]) let(
          p0=select(pts,i),
          p1=select(pts,i+1),
          center=(p0+p1)/2,
          v=sqrt(7/4-PHI)*(p1-p0)
        ) each [p0, [v.y+center.x, -v.x+center.y]]
      ]
    );
}
regular_polyhedron("dodecahedron", side=1, repeat=true)
linear_extrude(scale=0, height=sqrt((5+2*sqrt(5))/5)) makestar($face);

Example 49: The spheres are all radius 1 and the octahedra are sized to match the in-sphere, mid-sphere and out-sphere. The sphere size is slightly adjusted for the in-sphere and out-sphere so you can see the relationship: the sphere is tangent to the faces for the former and the corners poke out for the latter. Note also the difference in the size of the three octahedra.

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
sphere(r=1.005);
%regular_polyhedron("octahedron", ir=1, facedown=false);
right(3.5) {
  sphere(r=1);
  %regular_polyhedron("octahedron", mr=1, facedown=false);
}
right(6.5) {
  %sphere(r=.95);  // Slightly undersized sphere means the points poke out a bit
  regular_polyhedron("octahedron", or=1,facedown=false);
}

Example 50: For the Archimdean solids the in-sphere does not touch all of the faces, as shown by this example, but the circumscribed sphere meets every vertex. (This explains the problem for rounding over these solids because the rounding method uses the in-sphere.)

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
sphere(r=1.005);
%regular_polyhedron("snub dodecahedron", ir=1, facedown=false);
right(3) {
  sphere(r=1);
  %regular_polyhedron("snub dodecahedron", mr=1, facedown=false);
}
right(6) {
  %sphere(r=.99);
  regular_polyhedron("snub dodecahedron", or=1,facedown=false);
}

Example 51: For a Catalan solid the in-sphere touches every face but the circumscribed sphere only touches some vertices.

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
sphere(r=1.002);
%regular_polyhedron("pentagonal hexecontahedron", ir=1, facedown=false);
right(3) {
  sphere(r=1);
  %regular_polyhedron("pentagonal hexecontahedron", mr=1, facedown=false);
}
right(6) {
  %sphere(r=.98);
  regular_polyhedron("pentagonal hexecontahedron", or=1,facedown=false);
}

Example 52: Stellate an Archimedian solid, which has mixed faces

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("truncated icosahedron",stellate=1.5,or=1);

Example 53: Stellate a Catalan solid where faces are not regular

include <BOSL2/std.scad>
include <BOSL2/polyhedra.scad>
regular_polyhedron("triakis tetrahedron",stellate=0.5,or=1);

Synopsis: Returns info used to create a regular polyhedron.

Topics: Polyhedra, Shapes, Parts

See Also: regular_polyhedron()

Usage:

• info = regular_polyhedron_info(info, ...);

Description:

Calculate characteristics of regular polyhedra or the selection set for regular_polyhedron(). Invoke with the same polyhedron selection and size arguments used by regular_polyhedron() and use the info argument to request the desired return value. Set info to:

• "vnf": vnf for the selected polyhedron
• "vertices": vertex list for the selected polyhedron
• "faces": list of faces for the selected polyhedron, where each entry on the list is a list of point index values to be used with the vertex list
• "face normals": list of normal vectors for each face
• "in_radius": in-sphere radius for the selected polyhedron
• "mid_radius": mid-sphere radius for the selected polyhedron
• "out_radius": circumscribed sphere radius for the selected polyhedron
• "index set": index set selected by your specifications; use its length to determine the valid range for index.
• "face vertices": number of vertices on the faces of the selected polyhedron (always a list)
• "edge length": length of the smallest edge of the selected polyhedron
• "center": center for the polyhedron
• "type": polyhedron type, one of "platonic", "archimedean", "catalan", or "trapezohedron"
• "name": name of selected polyhedron

Arguments: