Modular hose segment and attachment ends.

To use, add the following lines to the beginning of your file:

include <BOSL2/std.scad>
include <BOSL2/modular_hose.scad>

1. Section: Modular Hose Parts
   • modular_hose() – Creates modular hose parts.
   • modular_hose_radius() – Returns the waist radius of the given modular hose size.

Synopsis: Creates modular hose parts.

Topics: Modular Hose, Parts

See Also: modular_hose_radius(), tube()

Usage:

• modular_hose(size, type, [clearance], [waist_len], [anchor], [spin], [orient]) [ATTACHMENTS];

Description:

Construct moduler hose segments or modular hose ends for connection to standard modular hose systems. The 1/4", 1/2" and 3/4" sizes are supported and you can produce just one end to make a mount or end attachment to a modular hose, or you can make modular hose segments. To make assembly possible with printed parts you can add clearances that make the ball end smaller and the socket end larger. These work by simply increasing the radius of the whole end by the specified amount. On a Prusa printer with PETG, a clearance of 0.05 allows the 3/4" hose parts to mate with standard modular hose or itself. A clearance of 0.05 to 0.1 allows the 1/2" parts to mate with standard hose, and with clearance 0 the 1/4" parts will mate with standard hose. Note that clearance values are different for the different sizes. You will have to experiment with your machine and materials. Small adjustments will change the stiffness of the connection.

Arguments:

Example 1:

include <BOSL2/std.scad>
include <BOSL2/modular_hose.scad>
modular_hose(1/4,"segment");
right(25)modular_hose(1/2,"segment");
right(60)modular_hose(3/4,"segment");

Example 2: A mount point for modular hose

include <BOSL2/std.scad>
include <BOSL2/modular_hose.scad>
cylinder(h=10, r=20)
   attach(TOP) modular_hose(1/2, "ball", waist_len=15);

Example 3: Mounting plate for something at the end of the hose

include <BOSL2/std.scad>
include <BOSL2/modular_hose.scad>
cuboid([50,50,5])
   attach(TOP) modular_hose(3/4, "socket", waist_len=0);

Synopsis: Returns the waist radius of the given modular hose size.

Topics: Modular Hose, Parts

See Also: modular_hose(), tube()

Usage:

• r = modular_hose_radius(size, [outer]);

Description:

Returns the inner (or outer) diameter of the waist section of the modular hose to enable hollowing out connecting channels. Note: diameter is accurate to about 1e-4.

Arguments:

Example 1:

include <BOSL2/std.scad>
include <BOSL2/modular_hose.scad>
$fn=64;
back_half()
   diff("remove")
     cuboid(50){
       attach(TOP) modular_hose(1/2, "ball");
       up(0.01)position(TOP+RIGHT)tag("remove")
         rot(180)
         xrot(-90)
         rotate_extrude(angle=135)
         right(25)
         circle(r=modular_hose_radius(1/2));
     }