Page Index - jlnaudin/x-drone GitHub Wiki
22 page(s) in this GitHub Wiki:
- Calmato Alpha 40 EP Flight missions logs results
- How to install and compile the Arduplane firmware with the Arduino IDE
- How to Install the hex firmware with the Mission Planner
- How to read and install the PID parameters file for the Calmato Alpha 40 EP
- How to setup the GPS Ublox NEO 6M (Crius) CN 06 V2
- The Calmato Alpha 40 EP setup with the APM ArduFlyer IMU board
- The programming of the Turnigy 9XR for the Calmato Alpha 40 EP
- Videos of the Calmato missions piloted with ArduPlane
- x drone: FX 61 Phantom flying wing in autonomous thermalling with the ThermoPilot v7.2
- x drone: FX 61 Phantom flying wing tested in a virtual wind tunnel
- x drone: FX 61 Phantom flying wing tested with ArduPlane v2.73 xp1 and ThermoPilot v7.1
- x drone: FX 61 Phantom flying wing THERMAL SCAN mode test flight with the ThermoPilot v7.2
- x drone: MaxiSwift, mission 28 Windy and Gusty mission test flight
- x drone: MaxiSwift, mission 35 comparison of FPL path of Real flight Vs HIL simulation
- x drone: MaxiSwift, mission 8 Low altitude profile mission
- x drone: MaxiSwift, the X_Plane model for HIL simulations
- X PLANE TUTORIAL: MaxiSwift installation with X Plane v9.70 for HIL simulations
- X PLANE TUTORIAL: X Plane v10 with ArduPlane v2.73 xp1 in HIL mode simulation
- X PLANE TUTORIAL: X Plane v9.70 with ArduPlane v2.73 xp1 in HIL mode simulation
- x_drone: Mission 16, full autonomous flight under FPL
- x_drone: Mission 18, low altitude left hand landing pattern training
- x_drone: Mission 35, windy and gusty wind conditions