The programming of the Turnigy 9XR for the Calmato Alpha 40 EP - jlnaudin/x-drone GitHub Wiki
Here some detailled photos about the programming of the Turnigy 9XR transmitter the Calmato Alpha 40 EP:
The GEAR switch is used to enable the features of the ArduPlane v2.73-xp1
The 3 positions (ID0,ID1,ID2) switch is used to change the flight modes (MANUAL, STABILIZE, AUTO)
Below, the flight modes selected on the Mission Planner
Below, the radio calibration done on the Mission Planner
