Page Index - josalggui/MaRGE GitHub Wiki
108 page(s) in this GitHub Wiki:
- Home
- MaRGE Wiki
- Index
- 1. Installing MaRGE and MaRCoS from scratch (NEW!)
- 2. Interface description
- 3. System configuration (NEW!)
- 4. Hardware configuration
- 5. Setting up autocalibration
- 6. Setting up localizer
- 7. Run custom sequences
- 8. Protocols
- 9. Create your own sequence - PyPulseq version
- 10. Create your own sequence analysis
- 11. Sequences
- 12. Additional notes
- 13. TODO
- Multichannel Notes (NEW!)
- Setting up a Red Pitaya (Old)
- Setting up MaRGE (Old)
- Toolbars (Old)
- Create your own sequence (no longer under maintenance)
- Image postprocessing
- Raw Data structure
- NEWS
- Add new RF coils
- Please reload this page
- Additional notes
- Please reload this page
- Advance reconstruction with Tyger
- Please reload this page
- AutoTuning
- Please reload this page
- Change reference system
- Please reload this page
- Create your own sequence
- Please reload this page
- Create your own sequence analysis
- Please reload this page
- Create your own sequence PyPulseq version
- Please reload this page
- decimation
- Please reload this page
- Experiment class
- Please reload this page
- FixGain
- Please reload this page
- Hardware configuration
- Please reload this page
- Hardware configuration new
- Please reload this page
- Interface description
- Please reload this page
- Inversion_Recovery
- Please reload this page
- Larmor
- Please reload this page
- Localizer
- Please reload this page
- Multichannel notes
- Please reload this page
- News
- Please reload this page
- Noise
- Please reload this page
- Protocols
- Please reload this page
- RabiFlops
- Please reload this page
- RARE Double Image
- Please reload this page
- RARE_PyPulseq
- Please reload this page
- Raw Data structure
- Please reload this page
- Run custom sequences
- Please reload this page
- runBatches
- Please reload this page
- Sequences
- Please reload this page
- Setting up autocalibration
- Please reload this page
- Setting up localizer
- Please reload this page
- Setting up MaRGE
- Please reload this page
- Setting up MaRGE and MaRCoS from scratch
- Please reload this page
- Setting up MaRGE and MaRCoS from scratch_pypi
- Please reload this page
- Setting up rabiflops
- Please reload this page
- Setting up Red Pitaya
- Please reload this page
- Shimming
- Please reload this page
- SPDS
- Please reload this page
- Sweep
- Please reload this page
- TODO
- Please reload this page
- Toolbars
- Please reload this page
- TSE
- Please reload this page
- utils
- Please reload this page