Consoles - Niilo007/Stationeers-Research GitHub Wiki

Kit (Consoles)

This kit produces a range of Consoles and displays such as the LED Display (Medium).

Kit (Consoles)
____________ General ____________ ____________ ____________
Paintable ✔
Nameable ❌
Prefab Hash -1241851179
Prefab Name ItemKitConsole
______________ Item ______________ ____________ ____________
Stack Size 5
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 700℃
Autoignition Temperature 1200℃
Made In Electronics Printer T1 Electronics Printer T2
alt text alt text
Time
Energy 100
Iron Fe 2g 2g
Gold Au 3g 3g
Copper Cu 5g 5g

Structure (Console)

This Norsec-designed control box manages devices such as the Active Vent, Passive Vent, Gas Sensor and Composite Door, depending on which circuitboard is inserted into the unit. It has a shared data/power port.

A completed console displays all devices connected to the current power network. Any devices not related to the installed circuitboard will be greyed-out and inoperable. Consoles are locked once a Data Disk is removed.

  • The image on the screen will automatically rotate to be right side up, When the console is placed sideways or upside down.
  • The selected Circuit Board is added under the glass panel.
    • The panel must therefore be removed with a crowbar, to gain access.
  • To change the settings, a data disk must be inserted into the slot.
Console
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 235638270
Prefab Name StructureConsole
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Consoles) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Crowbar
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 50W 50W
Heat Generation 10W 10W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom, OK
    outer loop vertex 0.0 0.0 0.0 vertex 2.5 2.5 0.0 vertex 2.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom, OK
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 2.5 0.0 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top, OK
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 0.0 2.5 vertex 2.5 2.5 2.5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top, OK
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 2.5 2.5 vertex 0.0 2.5 2.5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side (From Viewer)
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 2.5 vertex 0.0 2.5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side (From Viewer)
    outer loop vertex 0.0 0.0 2.5 vertex 0.0 2.5 2.5 vertex 0.0 2.5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side (From Viewer)
    outer loop vertex 2.5 0.0 0.0 vertex 2.5 2.5 0.0 vertex 2.5 0.0 2.5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side (From Viewer)
    outer loop vertex 2.5 0.0 2.5 vertex 2.5 2.5 0.0 vertex 2.5 2.5 2.5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Facing Viewer (Front)
    outer loop vertex 0.0 0.0 0.0 vertex 2.5 0.0 0.0 vertex 0.0 0.0 2.5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Facing Viewer (Front)
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 0.0 0.0 vertex 2.5 0.0 2.5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 // Back
    outer loop vertex 0.0 2.5 0.0 vertex 0.0 2.5 2.5 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 // Back
    outer loop vertex 0.0 2.5 2.5 vertex 2.5 2.5 2.5 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power In Indicator
    outer loop vertex 2.5 1.25 -2.5 vertex 1.25 1.25 0 vertex 0 1.25 -2.5 endloop
  endfacet
endsolid
Loading
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔
Error bool 0 1 ✔ ❌
Setting int ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower float -1 50 ✔ ❌
PrefabHash int 235638270 235638270 ✔ ❌
ReferenceId int ✔ ❌
Slot Name Class Icon _______ Slot Name Class Icon
0 Circuit Board Circuit Board 1 Data Disk Data Disk
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0,1
OccupantHash int ✔ ❌ 0,1
Quantity int 0 1 ✔ ❌ 0,1
Damage float 0 1 ✔ ❌ 0,1
Class ? int 0 34 ✔ ❌ 0,1
MaxQuantity int 0 1 ✔ ❌ 0,1
PrefabHash int ✔ ❌ 0,1
SortingClass ? int 0 7 ✔ ❌ 0,1
Connections Port Description
Power And Data 0

Structure (Console Dual)

This Norsec-designed control box manages devices such as the Active Vent, Gas Sensor, Composite Door and others, depending on which circuitboard is inserted into the unit. It has separate data and power ports.

A completed console displays all devices connected to the current power network. Any devices not related to the installed circuitboard will be greyed-out and inoperable. Consoles are locked once a Data Disk is removed.

  • The image on the screen will automatically rotate to be right side up, When the console is placed sideways or upside down.
  • The selected Circuit Board is added under the glass panel.
    • The panel must therefore be removed with a crowbar, to gain access.
  • To change the settings, a data disk must be inserted into the slot.
Console Dual
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -722284333
Prefab Name StructureConsoleDual
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Consoles) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Crowbar
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 50W 50W
Heat Generation 10W 10W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom, OK
    outer loop vertex 0.0 0.0 0.0 vertex 2.5 2.5 0.0 vertex 2.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom, OK
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 2.5 0.0 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top, OK
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 0.0 2.5 vertex 2.5 2.5 2.5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top, OK
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 2.5 2.5 vertex 0.0 2.5 2.5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side (From Viewer)
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 2.5 vertex 0.0 2.5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side (From Viewer)
    outer loop vertex 0.0 0.0 2.5 vertex 0.0 2.5 2.5 vertex 0.0 2.5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side (From Viewer)
    outer loop vertex 2.5 0.0 0.0 vertex 2.5 2.5 0.0 vertex 2.5 0.0 2.5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side (From Viewer)
    outer loop vertex 2.5 0.0 2.5 vertex 2.5 2.5 0.0 vertex 2.5 2.5 2.5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Facing Viewer (Front)
    outer loop vertex 0.0 0.0 0.0 vertex 2.5 0.0 0.0 vertex 0.0 0.0 2.5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Facing Viewer (Front)
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 0.0 0.0 vertex 2.5 0.0 2.5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 // Back
    outer loop vertex 0.0 2.5 0.0 vertex 0.0 2.5 2.5 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 // Back
    outer loop vertex 0.0 2.5 2.5 vertex 2.5 2.5 2.5 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power In Indicator
    outer loop vertex 2.5 1.25 -2.5 vertex 1.25 1.25 0 vertex 0 1.25 -2.5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex 1.25 1.25 2.5 vertex 2.5 1.25 3.75 vertex 0 1.25 3.75 endloop
  endfacet
endsolid
Loading
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔
Error bool 0 1 ✔ ❌
Setting int ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower float -1 50 ✔ ❌
PrefabHash int -722284333 -722284333 ✔ ❌
ReferenceId int ✔ ❌
Slot Name Class Icon _______ Slot Name Class Icon
0 Circuit Board Circuit Board 1 Data Disk Data Disk
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0,1
OccupantHash int ✔ ❌ 0,1
Quantity int 0 1 ✔ ❌ 0,1
Damage float 0 1 ✔ ❌ 0,1
Class ? int 0 34 ✔ ❌ 0,1
MaxQuantity int 0 1 ✔ ❌ 0,1
PrefabHash int ✔ ❌ 0,1
SortingClass ? int 0 7 ✔ ❌ 0,1
Connections Port Description
Data 0
Power 1

Structure (Console Monitor)

This Norsec-designed control box manages devices such as the Active Vent, Passive Vent, Gas Sensor, Security Camera and Composite Door, depending on which circuitboard is inserted into the unit. It has a shared data/power port, and a charming sloped interface.

A completed console displays all devices connected to the current power network. Any devices not related to the installed circuitboard will be greyed-out and inoperable. Consoles are locked once a Data Disk is removed.

  • The image on the screen will automatically rotate to be right side up, When the console is placed sideways or upside down.
  • The selected Circuit Board is added under the glass panel.
    • The panel must therefore be removed with a crowbar, to gain access.
  • To change the settings, a data disk must be inserted into the slot.
Console Monitor
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 801677497
Prefab Name StructureConsoleMonitor
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Consoles) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Crowbar
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 50W 50W
Heat Generation 10W 10W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔
Error bool 0 1 ✔ ❌
Setting int ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower float -1 50 ✔ ❌
PrefabHash int 801677497 801677497 ✔ ❌
ReferenceId int ✔ ❌
Slot Name Class Icon _______ Slot Name Class Icon
0 Circuit Board Circuit Board 1 Data Disk Data Disk
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0,1
OccupantHash int ✔ ❌ 0,1
Quantity int 0 1 ✔ ❌ 0,1
Damage float 0 1 ✔ ❌ 0,1
Class ? int 0 34 ✔ ❌ 0,1
MaxQuantity int 0 1 ✔ ❌ 0,1
PrefabHash int ✔ ❌ 0,1
SortingClass ? int 0 7 ✔ ❌ 0,1
Connections Port Description
Power And Data 0

Structure (LED Display (Small))

LED Display (Small)
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -815193061
Prefab Name StructureConsoleLED5
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Consoles) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 50W 50W
Heat Generation 10W 10W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom, OK
    outer loop vertex 0.0 0.0 0.0 vertex 2.5 2.5 0.0 vertex 2.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom, OK
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 2.5 0.0 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top, OK
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 0.0 2.5 vertex 2.5 2.5 2.5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top, OK
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 2.5 2.5 vertex 0.0 2.5 2.5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side (From Viewer)
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 2.5 vertex 0.0 2.5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side (From Viewer)
    outer loop vertex 0.0 0.0 2.5 vertex 0.0 2.5 2.5 vertex 0.0 2.5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side (From Viewer)
    outer loop vertex 2.5 0.0 0.0 vertex 2.5 2.5 0.0 vertex 2.5 0.0 2.5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side (From Viewer)
    outer loop vertex 2.5 0.0 2.5 vertex 2.5 2.5 0.0 vertex 2.5 2.5 2.5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Facing Viewer (Front)
    outer loop vertex 0.0 0.0 0.0 vertex 2.5 0.0 0.0 vertex 0.0 0.0 2.5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Facing Viewer (Front)
    outer loop vertex 0.0 0.0 2.5 vertex 2.5 0.0 0.0 vertex 2.5 0.0 2.5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 // Back
    outer loop vertex 0.0 2.5 0.0 vertex 0.0 2.5 2.5 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 // Back
    outer loop vertex 0.0 2.5 2.5 vertex 2.5 2.5 2.5 vertex 2.5 2.5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power In Indicator
    outer loop vertex 2.5 1.25 -2.5 vertex 1.25 1.25 0 vertex 0 1.25 -2.5 endloop
  endfacet
endsolid
Loading
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Mode int 0 2 ✔ ✔ Unit selection.
Error bool 0 1 ✔ ❌
Setting float ✔ ✔ Display value.
On bool 0 1 ✔ ✔
RequiredPower float -1 50 ✔ ❌
Color int 0 11 ✔ ✔ Text color.
PrefabHash int -815193061 -815193061 ✔ ❌
ReferenceId int ✔ ❌
Mode Name Description
0 Default Displays the raw value of Setting.
1 Percent A value of "1" is displayed as "100%", "0" as "0%" and "2" as "200%".
2 Power Displays the value as Watts, "100" is displayed as "100W" and "1000" as "1kW".
Connections Port Description
Power And Data 0

Structure (LED Display (Medium))

LED Display (Medium)
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -53151617
Prefab Name StructureConsoleLED1x2
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Consoles) 2
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 50W 50W
Heat Generation 10W 10W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 2
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Mode int 0 2 ✔ ✔ Unit selection.
Error bool 0 1 ✔ ❌
Setting float ✔ ✔ Display value.
On bool 0 1 ✔ ✔
RequiredPower float -1 50 ✔ ❌
Color int 0 11 ✔ ✔ Text color.
PrefabHash int -53151617 -53151617 ✔ ❌
ReferenceId int ✔ ❌
Mode Name Description
0 Default Displays the raw value of Setting.
1 Percent A value of "1" is displayed as "100%", "0" as "0%" and "2" as "200%".
2 Power Displays the value as Watts, "100" is displayed as "100W" and "1000" as "1kW".
Connections Port Description
Power And Data 0

Structure (LED Display (Large))

LED Display (Large)
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -1949054743
Prefab Name StructureConsoleLED1x3
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Consoles) 3
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 50W 50W
Heat Generation 10W 10W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 3
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Mode int 0 2 ✔ ✔ Unit selection.
Error bool 0 1 ✔ ❌
Setting float ✔ ✔ Display value.
On bool 0 1 ✔ ✔
RequiredPower float -1 50 ✔ ❌
Color int 0 11 ✔ ✔ Text color.
PrefabHash int -1949054743 -1949054743 ✔ ❌
ReferenceId int ✔ ❌
Mode Name Description
0 Default Displays the raw value of Setting.
1 Percent A value of "1" is displayed as "100%", "0" as "0%" and "2" as "200%".
2 Power Displays the value as Watts, "100" is displayed as "100W" and "1000" as "1kW".
Connections Port Description
Power And Data 0
⚠️ **GitHub.com Fallback** ⚠️