Fabricators - Niilo007/Stationeers-Research GitHub Wiki

Fabricators

Kit (Autolathe)

Kit (Autolathe)
____________ General ____________ ____________ ____________
Paintable โŒ
Prefab Hash -1753893214
Prefab Name ItemKitAutolathe
______________ Item ______________ ____________ ____________
Stack Size 1
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
Made In Autolathe Autolathe T2
alt text alt text
Time
Energy 5000
Iron Fe 20g 20g
Gold Au 2g 2g
Copper Cu 10g 10g

Structure (Autolathe)

The foundation of most Stationeer fabrication systems, the ExMin autolathe is a multi-axis molecular compositional system. Its complexity demands considerable time to assemble, but it remains an indispensable creation tool. Upgrade the device using a Autolathe Printer Mod for additional recipes and faster processing speeds.
Ignition Source!
Autolathe
____________ General ____________ ______________ ______________
Paintable โœ”
Prefab Hash 336213101
Prefab Name StructureAutolathe
____________ Durability ____________ ______________ ______________
Flashpoint Temperature ยด 100โ„ƒ
Autoignition Temperature 300โ„ƒ
_________ Construction _________ ______________ ______________
Placement Cost Kit (Autolathe) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Iron Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Cost Cable Coil 4
............................................................. ......................... .........................
Deconstruction Tool Wire Cutters
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Tool Screwdriver
Upgrade Cost Autolathe Printer Mod 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Horizontal Only Height 2
Required Support Frame Width 3
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 5 0.0 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 5 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 5 5 vertex 0.0 5 5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 5 vertex 0.0 5 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 5 vertex 7.5 5 0.0 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 0.0 0.0 vertex 0.0 0.0 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 0.0 vertex 0.0 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 5 vertex 7.5 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power Indicator
    outer loop vertex 7.5 -2.5 1.25 vertex 6.25 0 1.25 vertex 5 -2.5 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex  1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute Out Indicator
    outer loop vertex 9 1.25 3.75 vertex 7.5 2.5 3.75 vertex 7.5 0 3.75 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute In Indicator
    outer loop vertex 0 3.75 3.75 vertex -1.5 5 3.75 vertex -1.5 2.5 3.75 endloop
  endfacet
endsolid
Loading
Versions Autolathe T1 Autolathe T2
alt text alt text
Creation 1 1
Energy Cost 1 5
Material Cost 1 1
Build Time 1 0.66
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 โœ” โŒ
Open bool 0 1 โœ” โœ” Ingot eject lever
Error bool 0 1 โœ” โŒ
Activate bool 0 1 โœ” โœ” Printing state
Lock bool 0 1 โœ” โœ”
Reagents โœ” โŒ
On bool 0 1 โœ” โœ”
RequiredPower int -1 โœ” โŒ
RecipeHash int โœ” โœ”
CompletionRatio float 0 1 โœ” โŒ
ClearMemory bool 0 โŒ โœ”
ExportCount int 0 โœ” โŒ
ImportCount int 0 โœ” โŒ
PrefabHash int 336213101 336213101 โœ” โŒ
ReferenceId int โœ” โŒ
Slot Name Class Icon _______ Slot Name Class Icon
0 Import Ingot 1 Export None
Connections Port Description
Chute Input 0
Chute Output 1
Data 2
Power 3

Kit (Hydraulic Pipe Bender)

Kit (Hydraulic Pipe Bender)
____________ General ____________ ____________ ____________
Paintable โŒ
Prefab Hash -2098556089
Prefab Name ItemKitHydraulicPipeBender
______________ Item ______________ ____________ ____________
Stack Size 1
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
Made In Autolathe Autolathe T2
alt text alt text
Time
Energy 5000
Iron Fe 20g 20g
Gold Au 2g 2g
Copper Cu 10g 10g

Structure (Hydraulic Pipe Bender)

A go-to tool for all your atmospheric and plumbing needs, the ExMin Atmoprinter will create everything from pipes, pumps and tanks, to vents and filters, ensuring your survival in any environment. Upgrade the Atmoprinter using a Pipe Bender Mod for additional recipes and faster processing speeds.
Ignition Source!
Hydraulic Pipe Bender
____________ General ____________ ______________ ______________
Paintable โœ”
Prefab Hash -1888248335
Prefab Name StructureHydraulicPipeBender
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
_________ Construction _________ ______________ ______________
Placement Cost Kit (Hydraulic Pipe Bender) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Iron Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Cost Cable Coil 4
............................................................. ......................... .........................
Deconstruction Tool Wire Cutters
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Tool Screwdriver
Upgrade Cost Pipe Bender Mod 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Horizontal Only Height 2
Required Support Frame Width 3
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 5 0.0 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 5 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 5 5 vertex 0.0 5 5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 5 vertex 0.0 5 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 5 vertex 7.5 5 0.0 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 0.0 0.0 vertex 0.0 0.0 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 0.0 vertex 0.0 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 5 vertex 7.5 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power Indicator
    outer loop vertex 7.5 -2.5 1.25 vertex 6.25 0 1.25 vertex 5 -2.5 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex  1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute Out Indicator
    outer loop vertex 9 1.25 3.75 vertex 7.5 2.5 3.75 vertex 7.5 0 3.75 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute In Indicator
    outer loop vertex 0 3.75 3.75 vertex -1.5 5 3.75 vertex -1.5 2.5 3.75 endloop
  endfacet
endsolid
Loading
Versions Hydraulic Pipe Bender T1 Hydraulic Pipe Bender T2
alt text alt text
Creation 1 1
Energy Cost 1 5
Material Cost 1 1
Build Time 1 0.66
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 โœ” โŒ
Open bool 0 1 โœ” โœ” Ingot eject lever
Error bool 0 1 โœ” โŒ
Activate bool 0 1 โœ” โœ” Printing state
Lock bool 0 1 โœ” โœ”
Reagents โœ” โŒ
On bool 0 1 โœ” โœ”
RequiredPower int -1 โœ” โŒ
RecipeHash int โœ” โœ”
CompletionRatio float 0 1 โœ” โŒ
ClearMemory bool 0 โŒ โœ”
ExportCount int 0 โœ” โŒ
ImportCount int 0 โœ” โŒ
PrefabHash int -1888248335 -1888248335 โœ” โŒ
ReferenceId int โœ” โŒ
Slot Name Class Icon _______ Slot Name Class Icon
0 Import Ingot 1 Export None
Connections Port Description
Chute Input 0
Chute Output 1
Data 2
Power 3

Kit (Electronics Printer)

Kit (Electronics Printer)
____________ General ____________ ____________ ____________
Paintable โŒ
Prefab Hash -1181922382
Prefab Name ItemKitElectronicsPrinter
______________ Item ______________ ____________ ____________
Stack Size 1
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
Made In Autolathe Autolathe T2
alt text alt text
Time
Energy 5000
Iron Fe 20g 20g
Gold Au 2g 2g
Copper Cu 10g 10g

Structure (Electronics Printer)

The electronic printer will create any electronic part you need. From circuit boards and electronic devices to solar panels. The choice is yours. Upgrade the device using a Electronic Printer Mod for additional recipes and faster processing speeds.
Ignition Source!
Electronics Printer
____________ General ____________ ______________ ______________
Paintable โœ”
Prefab Hash 1307165496
Prefab Name StructureElectronicsPrinter
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
_________ Construction _________ ______________ ______________
Placement Cost Kit (Electronics Printer) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Iron Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Cost Cable Coil 4
............................................................. ......................... .........................
Deconstruction Tool Wire Cutters
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Tool Screwdriver
Upgrade Cost Electronic Printer Mod 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Horizontal Only Height 2
Required Support Frame Width 3
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 5 0.0 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 5 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 5 5 vertex 0.0 5 5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 5 vertex 0.0 5 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 5 vertex 7.5 5 0.0 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 0.0 0.0 vertex 0.0 0.0 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 0.0 vertex 0.0 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 5 vertex 7.5 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power Indicator
    outer loop vertex 7.5 -2.5 1.25 vertex 6.25 0 1.25 vertex 5 -2.5 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex  1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute Out Indicator
    outer loop vertex 9 1.25 3.75 vertex 7.5 2.5 3.75 vertex 7.5 0 3.75 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute In Indicator
    outer loop vertex 0 3.75 3.75 vertex -1.5 5 3.75 vertex -1.5 2.5 3.75 endloop
  endfacet
endsolid
Loading
Versions Electronics Printer T1 Electronics Printer T2
alt text alt text
Creation 1 1
Energy Cost 1 5
Material Cost 1 1
Build Time 1 0.66
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 โœ” โŒ
Open bool 0 1 โœ” โœ” Ingot eject lever
Error bool 0 1 โœ” โŒ
Activate bool 0 1 โœ” โœ” Printing state
Lock bool 0 1 โœ” โœ”
Reagents โœ” โŒ
On bool 0 1 โœ” โœ”
RequiredPower int -1 โœ” โŒ
RecipeHash int โœ” โœ”
CompletionRatio float 0 1 โœ” โŒ
ClearMemory bool 0 โŒ โœ”
ExportCount int 0 โœ” โŒ
ImportCount int 0 โœ” โŒ
PrefabHash int 1307165496 1307165496 โœ” โŒ
ReferenceId int โœ” โŒ
Slot Name Class Icon _______ Slot Name Class Icon
0 Import Ingot 1 Export None
Connections Port Description
Chute Input 0
Chute Output 1
Data 2
Power 3

Kit (Tool Manufactory)

Kit (Tool Manufactory)
____________ General ____________ ____________ ____________
Paintable โŒ
Prefab Hash 529137748
Prefab Name ItemKitToolManufactory
______________ Item ______________ ____________ ____________
Stack Size 1
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
Made In Autolathe Autolathe T2
alt text alt text
Time
Energy 1000
Iron Fe 20g 20g
Copper Cu 10g 10g

Structure (Tool Manufactory)

No mission can be completed without the proper tools. The Norsec ThuulDek manufactory can fabricate almost any tool or hand-held device a Stationeer may need to complete their mission, as well as a variety of delightful paints.

Upgrade the device using a Tool Printer Mod for additional recipes and faster processing speeds
Ignition Source!
Tool Manufactory
____________ General ____________ ______________ ______________
Paintable โœ”
Prefab Hash -465741100
Prefab Name StructureToolManufactory
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
_________ Construction _________ ______________ ______________
Placement Cost Kit (Tool Manufactory) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Iron Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Cost Cable Coil 4
............................................................. ......................... .........................
Deconstruction Tool Wire Cutters
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Tool Screwdriver
Upgrade Cost Tool Printer Mod 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Horizontal Only Height 2
Required Support Frame Width 3
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 5 0.0 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 5 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 5 5 vertex 0.0 5 5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 5 vertex 0.0 5 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 5 vertex 7.5 5 0.0 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 0.0 0.0 vertex 0.0 0.0 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 0.0 vertex 0.0 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 5 vertex 7.5 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power Indicator
    outer loop vertex 7.5 -2.5 1.25 vertex 6.25 0 1.25 vertex 5 -2.5 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex  1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute Out Indicator
    outer loop vertex 9 1.25 3.75 vertex 7.5 2.5 3.75 vertex 7.5 0 3.75 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute In Indicator
    outer loop vertex 0 3.75 3.75 vertex -1.5 5 3.75 vertex -1.5 2.5 3.75 endloop
  endfacet
endsolid
Loading
Versions Tool Manufactory T1 Tool Manufactory T2
alt text alt text
Creation 1 1
Energy Cost 1 6
Material Cost 1 1
Build Time 1 0.66
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 โœ” โŒ
Open bool 0 1 โœ” โœ” Ingot eject lever
Error bool 0 1 โœ” โŒ
Activate bool 0 1 โœ” โœ” Printing state
Lock bool 0 1 โœ” โœ”
Reagents โœ” โŒ
On bool 0 1 โœ” โœ”
RequiredPower int -1 โœ” โŒ
RecipeHash int โœ” โœ”
CompletionRatio float 0 1 โœ” โŒ
ClearMemory bool 0 โŒ โœ”
ExportCount int 0 โœ” โŒ
ImportCount int 0 โœ” โŒ
PrefabHash int -465741100 -465741100 โœ” โŒ
ReferenceId int โœ” โŒ
Slot Name Class Icon _______ Slot Name Class Icon
0 Import Ingot 1 Export None
Connections Port Description
Chute Input 0
Chute Output 1
Data 2
Power 3

Kit (Security Printer)

Kit (Security Printer)
____________ General ____________ ____________ ____________
Paintable โŒ
Prefab Hash 578078533
Prefab Name ItemKitSecurityPrinter
______________ Item ______________ ____________ ____________
Stack Size 1
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
Made In Electronics Printer T1 Electronics Printer T2
alt text alt text
Time
Energy 100
Gold Au 20g 20g
Copper Cu 20g 20g
Steel 20g 20g

Structure (Security Printer)

Any Stationeer concerned about security needs the Harkwell-designed Vigilant-E security printer. Use the Vigilant-E to create a Catridge (Access Controller), in order to restrict access to different parts of your base via keycards like the Access Card (Blue). The printer also makes a variety of weapons and ammunitions to defend your base against any hostile, aggressive or just slightly rude entites you encounter as you explore the Solar System.
Ignition Source!
Security Printer
____________ General ____________ ______________ ______________
Paintable โœ”
Prefab Hash -641491515
Prefab Name StructureSecurityPrinter
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
_________ Construction _________ ______________ ______________
Placement Cost Kit (Security Printer) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Steel Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Cost Cable Coil 4
............................................................. ......................... .........................
Deconstruction Tool Wire Cutters
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Horizontal Only Height 2
Required Support Frame Width 3
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 5 0.0 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 5 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 5 5 vertex 0.0 5 5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 5 vertex 0.0 5 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 5 vertex 7.5 5 0.0 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 0.0 0.0 vertex 0.0 0.0 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 0.0 vertex 0.0 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 5 vertex 7.5 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power Indicator
    outer loop vertex 7.5 -2.5 1.25 vertex 6.25 0 1.25 vertex 5 -2.5 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex  1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute Out Indicator
    outer loop vertex 9 1.25 3.75 vertex 7.5 2.5 3.75 vertex 7.5 0 3.75 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute In Indicator
    outer loop vertex 0 3.75 3.75 vertex -1.5 5 3.75 vertex -1.5 2.5 3.75 endloop
  endfacet
endsolid
Loading
Versions Security Printer T1
alt text
Creation 1
Energy Cost 1
Material Cost 1
Build Time 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 โœ” โŒ
Open bool 0 1 โœ” โœ” Ingot eject lever
Error bool 0 1 โœ” โŒ
Activate bool 0 1 โœ” โœ” Printing state
Lock bool 0 1 โœ” โœ”
Reagents โœ” โŒ
On bool 0 1 โœ” โœ”
RequiredPower int -1 โœ” โŒ
RecipeHash int โœ” โœ”
CompletionRatio float 0 1 โœ” โŒ
ClearMemory bool 0 โŒ โœ”
ExportCount int 0 โœ” โŒ
ImportCount int 0 โœ” โŒ
PrefabHash int -641491515 -641491515 โœ” โŒ
ReferenceId int โœ” โŒ
Slot Name Class Icon _______ Slot Name Class Icon
0 Import Ingot 1 Export None
Connections Port Description
Chute Input 0
Chute Output 1
Data 2
Power 3

Kit (Automated Oven)

Kit (Automated Oven)
____________ General ____________ ____________ ____________
Paintable โœ”
Prefab Hash -1931958659
Prefab Name ItemKitAutomatedOven
______________ Item ______________ ____________ ____________
Stack Size 10
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
Made In Electronics Printer T2
alt text
Time
Energy 15000
Gold Au 10g
Copper Cu 15g
Steel 25g
Constantan 5g
Solder 10g

Structure (Automated Oven)
Ignition Source!
Automated Oven
____________ General ____________ ______________ ______________
Paintable โœ”
Prefab Hash -1672404896
Prefab Name StructureAutomatedOven
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
_________ Construction _________ ______________ ______________
Placement Cost Kit (Automated Oven) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Iron Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 100W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Any* Height 2
Required Support Frame Width 3
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 5 0.0 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 5 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 5 5 vertex 0.0 5 5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 5 vertex 0.0 5 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 5 vertex 7.5 5 0.0 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 0.0 0.0 vertex 0.0 0.0 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 0.0 vertex 0.0 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 5 vertex 7.5 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power Indicator
    outer loop vertex 7.5 -2.5 1.25 vertex 6.25 0 1.25 vertex 5 -2.5 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex  1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute Out Indicator
    outer loop vertex 9 3.75 3.75 vertex 7.5 5 3.75 vertex 7.5 2.5 3.75 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute In Indicator
    outer loop vertex 0 3.75 3.75 vertex -1.5 5 3.75 vertex -1.5 2.5 3.75 endloop
  endfacet
endsolid
Loading
Versions Automated Oven T1
alt text
Creation 1
Energy Cost 1
Material Cost 1
Build Time 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 โœ” โŒ
Open bool 0 1 โœ” โœ” Reagent eject lever
Error bool 0 1 โœ” โŒ
Activate bool 0 1 โœ” โœ” Printing state
Lock bool 0 1 โœ” โœ”
Reagents โœ” โŒ
On bool 0 1 โœ” โœ”
RequiredPower float -1 โœ” โŒ
RecipeHash int โœ” โœ”
CompletionRatio float 0 1 โœ” โŒ
ClearMemory bool 0 โŒ โœ”
ExportCount int 0 โœ” โŒ
ImportCount int 0 โœ” โŒ
PrefabHash int -1672404896 -1672404896 โœ” โŒ
ReferenceId int โœ” โŒ
Slot Name Class Icon _______ Slot Name Class Icon
0 Import None 1 Export None
Connections Port Description
Chute Input 0
Chute Output 1
Data 2
Power 3

Kit (Advanced Packaging Machine)

Kit (Advanced Packaging Machine)
____________ General ____________ ____________ ____________
Paintable โœ”
Prefab Hash -598545233
Prefab Name ItemKitAdvancedPackagingMachine
______________ Item ______________ ____________ ____________
Stack Size 10
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
Made In Electronics Printer T2
alt text
Time
Energy 18000
Copper Cu 10g
Steel 20g
Electrum 15g
Constantan 10g

Structure (Advanced Packaging Machine)

The Xigo Advanced Cannifier Multi-Plus Pro is an automateable packaging machine that uses Empty Cans and cooked food to create canned sustenance that does not decay. Note that the ACMPP only accepts cooked food and tin cans.
Ignition Source!
Advanced Packaging Machine
____________ General ____________ ______________ ______________
Paintable โœ”
Prefab Hash -463037670
Prefab Name StructureAdvancedPackagingMachine
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100โ„ƒ
Autoignition Temperature 300โ„ƒ
_________ Construction _________ ______________ ______________
Placement Cost Kit (Advanced Packaging Machine) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Iron Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 10W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Any* Height 2
Required Support Frame Width 3
Show Dimensions: 
solid cube
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 0.0 endloop
  endfacet
  facet normal 0.0 0.0 1.0 //Bottom
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 5 0.0 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 5 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Top
    outer loop vertex 0.0 0.0 5 vertex 7.5 5 5 vertex 0.0 5 5 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal -1.0 0.0 0.0 //Left Side
    outer loop vertex 0.0 0.0 5 vertex 0.0 5 5 vertex 0.0 5 0.0 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 0.0 vertex 7.5 5 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 1.0 0.0 0.0 //Right Side
    outer loop vertex 7.5 0.0 5 vertex 7.5 5 0.0 vertex 7.5 5 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 0.0 vertex 7.5 0.0 0.0 vertex 0.0 0.0 5 endloop
  endfacet
  facet normal 0.0 -1.0 0.0 //Front
    outer loop vertex 0.0 0.0 5 vertex 7.5 0.0 0.0 vertex 7.5 0.0 5 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 0.0 vertex 0.0 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 1.0 0.0 //Back
    outer loop vertex 0.0 5 5 vertex 7.5 5 5 vertex 7.5 5 0.0 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Power Indicator
    outer loop vertex 7.5 -2.5 1.25 vertex 6.25 0 1.25 vertex 5 -2.5 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Data Indicator
    outer loop vertex  1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute Out Indicator
    outer loop vertex 9 3.75 3.75 vertex 7.5 5 3.75 vertex 7.5 2.5 3.75 endloop
  endfacet
  facet normal 0.0 0.0 -1.0 //Chute In Indicator
    outer loop vertex 0 3.75 3.75 vertex -1.5 5 3.75 vertex -1.5 2.5 3.75 endloop
  endfacet
endsolid
Loading
Versions Advanced Packaging Machine T1
alt text
Creation 1
Energy Cost 1
Material Cost 1
Build Time 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 โœ” โŒ
Open bool 0 1 โœ” โœ” Reagent eject lever
Error bool 0 1 โœ” โŒ
Activate bool 0 1 โœ” โœ” Printing state
Lock bool 0 1 โœ” โœ”
Reagents โœ” โŒ
On bool 0 1 โœ” โœ”
RequiredPower float -1 โœ” โŒ
RecipeHash int โœ” โœ”
CompletionRatio float 0 1 โœ” โŒ
ClearMemory bool 0 โŒ โœ”
ExportCount int 0 โœ” โŒ
ImportCount int 0 โœ” โŒ
PrefabHash int -463037670 -463037670 โœ” โŒ
ReferenceId int โœ” โŒ
Slot Name Class Icon _______ Slot Name Class Icon
0 Import None 1 Export None
Connections Port Description
Chute Input 0
Chute Output 1
Data 2
Power 3
โš ๏ธ **GitHub.com Fallback** โš ๏ธ