Sensors - Niilo007/Stationeers-Research GitHub Wiki

Sensors

Kit (Sensors)

This kit produces a range of sensors, including Gas Sensor, Daylight Sensor, Motion Sensor, Proximity Sensor and Occupancy Sensor.

Kit (Sensors)
____________ General ____________ ____________ ____________
Paintable ✔
Nameable ❌
Prefab Hash -1776897113
Prefab Name ItemKitSensor
______________ Item ______________ ____________ ____________
Stack Size 5
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 700℃
Autoignition Temperature 1200℃
Made In Electronics Printer T1 Electronics Printer T2 Hydraulic Pipe Bender T1 Hydraulic Pipe Bender T2
alt text alt text alt text alt text
Time
Energy $\text{\textcolor{green}{10}}$ $\text{\textcolor{red}{500}}$
Iron Fe $\text{\textcolor{red}{3g}}$ $\text{\textcolor{red}{3g}}$ $\text{\textcolor{green}{1g}}$ $\text{\textcolor{green}{1g}}$
Gold Au 1g 1g 1g 1g
Copper Cu 1g 1g 1g 1g

Structure (Daylight Sensor)

Daylight sensors provide data on whether the current region of your base is in sunlight, and report the exact solar angle. Note that the orientation of the sensor alters the reported solar angle, while Logic systems can be used to offset it.

  • Can only monitor one grid. Placing it on the border of two grids causes it to select one of them to monitor.

  • Placements:
    • Facing East, Data North:
    • Facing East, Data South:
    • Facing Up, Data North:
    • Facing Up, Data South:
    • Facing West, Data North:
    • Facing West, Data South:
Daylight Sensor DS
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 1076425094
Prefab Name StructureDaylightSensor
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sensors) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Mode bool 0 1 ✔ ✔ Solar Angle Mode
Activate bool 0 1 ✔ ✔ Grid Sunlight
Horizontal float -180 180 ✔ ❌
Vertical float 0 180 ✔ ❌
SolarAngle float -180 180 ✔ ❌ Mirrors either Horizontal or Vertical based on Mode.
On bool 0 1 ✔ ✔ ???
PrefabHash int 1076425094 1076425094 ✔ ❌
SolarIrradiance float 0 ✔ ❌
ReferenceId int ✔ ❌
Mode Description
0 Default SolarAngle mirrors Vertical.
1 Horizontal SolarAngle mirrors Horizontal.
2 Vertical SolarAngle mirrors Vertical.
Connections Port Description
Power And Data 0

Structure (Motion Sensor)

Originally developed to monitor dance marathons, the motion sensor can also be connected to Logic systems for security purposes, automatic lighting, doors and various other applications.

The sensor activates whenever a player enters the grid it is placed on.

  • Detects any entity or item in the same grid as the sensor.
  • Can only monitor one grid. Placing it on the border of two grids causes it to select one of them to monitor.
Motion Sensor MS
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -1713470563
Prefab Name StructureMotionSensor
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sensors) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Activate bool 0 1 ✔ ✔ Item Detected
Quantity int 0 ✔ ❌ Amount Of Items
On bool 0 1 ✔ ✔ ???
PrefabHash int -1713470563 -1713470563 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Power And Data 0

Structure (Gas Sensor)

Gas sensors are designed to monitor and report basic atmospheric information, including temperature, pressure, and gas ratios. They also make wonderful wedding presents.

  • Can only monitor one grid. Placing it on the border of two grids causes it to select one of them to monitor.
Gas Sensor GS
____________ General ____________ ______________ ______________
Paintable ❌
Nameable ✔
Prefab Hash -1252983604
Prefab Name StructureGasSensor
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sensors) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Pressure float 0 ✔ ❌
Temperature float 0 ✔ ❌
RatioOxygen float 0 1 ✔ ❌
RatioCarbonDioxide float 0 1 ✔ ❌
RatioNitrogen float 0 1 ✔ ❌
RatioPollutant float 0 1 ✔ ❌
RatioVolatiles float 0 1 ✔ ❌
RatioWater float 0 1 ✔ ❌
RatioNitrousOxide float 0 1 ✔ ❌
PrefabHash int -1252983604 -1252983604 ✔ ❌
Combustion bool 0 1 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Data 0

Structure (Occupancy Sensor)

Will be triggered if there is a player in the same room as the sensor. The quantity variable will show the number of players. You can use configure it to only detect players who hold the correct Access Card using a Cartridge (Access Controller) in a Handheld Tablet. This sensor only works when placed in a room.

Occupancy Sensor OS
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 322782515
Prefab Name StructureOccupancySensor
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sensors) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Activate bool 0 1 ✔ ❌ Person Detected
Quantity int 0 ✔ ❌ Amount Of People
PrefabHash int 322782515 322782515 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Power And Data 0

Structure (Proximity Sensor)

Will be triggered if there is a player in the range of the sensor (as defined by the setting dial). The quantity variable will show the number of players. You can configure the sensor to only detect players who hold the correct Access Card using a Cartridge (Access Controller) in a Handheld Tablet.

  • Detects people within the set range of the sensor.
  • The detection range can be configured by hand using the integrated dial, Or with logic.
  • If configured with the Cartridge (Access Controller) it only detects people with the correct Access Card.
Proximity Sensor PS
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 568800213
Prefab Name StructureProximitySensor
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sensors) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Activate bool 0 1 ✔ ❌ Person Detected
Setting int 0 250 ✔ ✔ Detection Range
Quantity int 0 ✔ ❌ Amount Of People
PrefabHash int 568800213 568800213 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Power And Data 0

Kit (Trigger Plate)

Kit (Trigger Plate)
____________ General ____________ ____________ ____________
Paintable ✔
Nameable ❌
Prefab Hash 123504691
Prefab Name ItemKitPressurePlate
______________ Item ______________ ____________ ____________
Stack Size 5
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
Made In Electronics Printer T1 Electronics Printer T2
alt text alt text
Time
Energy 1000
Gold Au 2g 2g
Copper Cu 2g 2g

Structure (Trigger Plate (Small))

  • Detects how many items and entities are on top of it.
  • The port with the data icon on the left is Data-1 and the port with it on the right is data-0.
  • Cables can be placed under the plate.
  • A floor grate or a wall piece on top of the plate will not stop it from detecting entities.
Trigger Plate (Small) TP
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -1536471028
Prefab Name StructurePressurePlateSmall
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Trigger Plate) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Setting int 0 ✔ ❌ Amount of entities.
PrefabHash int -1536471028 -1536471028 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Data 0
Data 1

Structure (Trigger Plate (Medium))

  • Detects how many items and entities are on top of it.
  • The port with the data icon on the left is Data-1 and the port with it on the right is data-0.
  • Cables can be placed under the plate.
  • A floor grate or a wall piece on top of the plate will not stop it from detecting entities.
Trigger Plate (Medium) TP
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 1269458680
Prefab Name StructurePressurePlateMedium
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Trigger Plate) 2
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 2
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Setting int 0 ✔ ❌ Amount of entities.
PrefabHash int 1269458680 1269458680 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Data 0
Data 1

Structure (Trigger Plate (Large))

  • Detects how many items and entities are on top of it.
  • The port with the data icon on the left is Data-1 and the port with it on the right is data-0.
  • Cables can be placed under the plate.
  • A floor grate or a wall piece on top of the plate will not stop it from detecting entities.
Trigger Plate (Large) TP
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -2008706143
Prefab Name StructurePressurePlateLarge
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Trigger Plate) 3
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Wall Width 3
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Setting int 0 ✔ ❌ Amount of entities.
PrefabHash int -2008706143 -2008706143 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Data 0
Data 1

Analyzers

Kit (Pipe Analyzer)

Kit (Pipe Analyzer)
____________ General ____________ ____________ ____________
Paintable ✔
Nameable ❌
Prefab Hash -767597887
Prefab Name ItemPipeAnalyizer
______________ Item ______________ ____________ ____________
Stack Size 5
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature NA
Autoignition Temperature NA
Made In Hydraulic Pipe Bender T1 Hydraulic Pipe Bender T2
alt text alt text
Time
Energy 500
Iron Fe 2g 2g
Gold Au 2g 2g
Electrum 2g 2g

Structure (Pipe Analyzer)

Allegedly the outcome of a weekend father-daughter electronics project by an overzealous ExMin engineer, the pipe analyzer is essentially a more advanced version of the Pipe Meter.

Displaying the internal pressure of pipe networks, it also reads out temperature and gas contents, and can be connected to a Console or Computer via a Logic system.

  • Most values will read as "-1" if the analyzer is unpowered or off.
Pipe Analyzer
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 435685051
Prefab Name StructurePipeAnalysizer
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Pipe Analyzer) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 5W 5W
Heat Generation 1W 1W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Gas Pipe Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Error bool 0 1 ✔ ❌
Pressure float -1 ✔ ❌
Temperature float -1 ✔ ❌
Lock bool 0 1 ✔ ✔
RatioOxygen float -1 1 ✔ ❌
RatioCarbonDioxide float -1 1 ✔ ❌
RatioNitrogen float -1 1 ✔ ❌
RatioPollutant float -1 1 ✔ ❌
RatioVolatiles float -1 1 ✔ ❌
RatioWater float -1 1 ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower int -1 5 ✔ ❌
TotalMoles float -1 ✔ ❌
Volume int -1 ✔ ❌ Volume of the pipe network.
RatioNitrousOxide float -1 1 ✔ ❌
PrefabHash int 435685051 435685051 ✔ ❌
Combustion bool 0 1 ✔ ❌
RatioLiquidNitrogen float -1 1 ✔ ❌
VolumeOfLiquid float -1 ✔ ❌
RatioLiquidOxygen float -1 1 ✔ ❌
RatioLiquidVolatiles float -1 1 ✔ ❌
RatioSteam float -1 1 ✔ ❌
RatioLiquidCarbonDioxide float -1 1 ✔ ❌
RatioLiquidPollutant float -1 1 ✔ ❌
RatioLiquidNitrousOxide float -1 1 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Power And Data 0

Kit (Liquid Pipe Analyzer)

Kit (Liquid Pipe Analyzer)
____________ General ____________ ____________ ____________
Paintable ✔
Nameable ❌
Prefab Hash 226055671
Prefab Name ItemLiquidPipeAnalyzer
______________ Item ______________ ____________ ____________
Stack Size 5
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
Made In Hydraulic Pipe Bender T1 Hydraulic Pipe Bender T2
alt text alt text
Time
Energy 500
Iron Fe 2g 2g
Gold Au 2g 2g
Electrum 2g 2g

Structure (Liquid Pipe Analyzer)

  • Most values will read as "-1" if the analyzer is unpowered or off.
Liquid Pipe Analyzer
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash -2113838091
Prefab Name StructureLiquidPipeAnalyzer
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Liquid Pipe Analyzer) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 5W 5W
Heat Generation 1W 1W
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Liquid Pipe Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Error bool 0 1 ✔ ❌
Pressure float -1 ✔ ❌
Temperature float -1 ✔ ❌
Lock bool 0 1 ✔ ✔
RatioOxygen float -1 1 ✔ ❌
RatioCarbonDioxide float -1 1 ✔ ❌
RatioNitrogen float -1 1 ✔ ❌
RatioPollutant float -1 1 ✔ ❌
RatioVolatiles float -1 1 ✔ ❌
RatioWater float -1 1 ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower int -1 5 ✔ ❌
TotalMoles float -1 ✔ ❌
Volume int -1 ✔ ❌ Volume of the pipe network.
RatioNitrousOxide float -1 1 ✔ ❌
PrefabHash int -2113838091 -2113838091 ✔ ❌
Combustion bool 0 1 ✔ ❌
RatioLiquidNitrogen float -1 1 ✔ ❌
VolumeOfLiquid float -1 ✔ ❌
RatioLiquidOxygen float -1 1 ✔ ❌
RatioLiquidVolatiles float -1 1 ✔ ❌
RatioSteam float -1 1 ✔ ❌
RatioLiquidCarbonDioxide float -1 1 ✔ ❌
RatioLiquidPollutant float -1 1 ✔ ❌
RatioLiquidNitrousOxide float -1 1 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Power And Data 0

Kit (Cable Analyzer)

Kit (Cable Analyzer)
____________ General ____________ ____________ ____________
Paintable ✔
Nameable ❌
Prefab Hash -1792787349
Prefab Name ItemCableAnalyser
______________ Item ______________ ____________ ____________
Stack Size 5
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
Made In Electronics Printer T1 Electronics Printer T2
alt text alt text
Time
Energy 100
Iron Fe 1g 1g
Copper Cu 2g 2g
Silicon Si 2g 2g

Structure (Cable Analyzer)

Cable Analyzer
____________ General ____________ ______________ ______________
Paintable ✔
Nameable ✔
Prefab Hash 1036015121
Prefab Name StructureCableAnalysizer
____________ Durability ____________ ______________ ______________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
_________ Construction _________ ______________ ______________
Placement Cost Kit (Cable Analyzer) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Placement Dimensions
Snapping Small Grid Length 1
Rotation Any Height 1
Required Support Cable Width 1
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
PowerPotential float 0 ✔ ❌
PowerActual float 0 ✔ ❌
PowerRequired float 0 ✔ ❌
PrefabHash int 1036015121 1036015121 ✔ ❌
ReferenceId int ✔ ❌
Connections Port Description
Data 0
⚠️ **GitHub.com Fallback** ⚠️