Computers - Niilo007/Stationeers-Research GitHub Wiki
This kit produces a single Computer.
Kit (Computer) | ||
---|---|---|
![]() |
||
____________ General ____________ | ____________ | ____________ |
Paintable | ❌ | |
Nameable | ❌ | |
Prefab Hash | 1990225489 | |
Prefab Name | ItemKitComputer | |
______________ Item ______________ | ____________ | ____________ |
Stack Size | 5 | |
Class | None | 0 |
SortingClass | Kits | 1 |
____________ Durability ____________ | ____________ | ____________ |
Flashpoint Temperature | 100℃ | |
Autoignition Temperature | 300℃ |
Made In | Electronics Printer T1 | Electronics Printer T2 |
---|---|---|
![]() |
![]() |
|
Time | ||
Energy | 100 | |
Iron Fe |
5g | 5g |
Gold Au |
5g | 5g |
Copper Cu |
10g | 10g |
In some ways a relic, the 'Chonk R1' was designed by severely conflicted Norsec technicians, who needed a unit that could operate with a wide range of motherboards, while also enduring the worst a new Cadet could throw at it.
The result is a machine described by some as 'the only PC likely to survive our collision with a black hole', while other, less appreciative users regard it as sharing most of its technological DNA with a cheese grater.
Compatible motherboards:
Computer | ||
---|---|---|
![]() |
||
____________ General ____________ | ______________ | ______________ |
Paintable | ✔ | |
Nameable | ✔ | |
Prefab Hash | -626563514 | |
Prefab Name | StructureComputer | |
____________ Durability ____________ | ______________ | ______________ |
Flashpoint Temperature | NA | |
Autoignition Temperature | NA | |
_________ Construction _________ | ______________ | ______________ |
Placement Cost | Kit (Computer) | 1 |
............................................................. | ......................... | ......................... |
Deconstruction Tool | Hand Drill | |
Upgrade Tool | Screwdriver | |
............................................................. | ......................... | ......................... |
Deconstruction Tool | Screwdriver | |
____________ Power ____________ | ____ Min ____ | ____ Max ____ |
Power Use | 200W | 200W |
Heat Generation |
Placement | Dimensions | |||
---|---|---|---|---|
Snapping | Small Grid | Length | 1 | |
Rotation | Horizontal Only | Height | 3 | |
Required Support | None | Width | 2 |
Show Dimensions:
solid cube
facet normal 0.0 0.0 1.0 //Bottom, OK
outer loop vertex 0.0 0.0 0.0 vertex 5 2.5 0.0 vertex 5 0.0 0.0 endloop
endfacet
facet normal 0.0 0.0 1.0 //Bottom, OK
outer loop vertex 0.0 0.0 0.0 vertex 0.0 2.5 0.0 vertex 5 2.5 0.0 endloop
endfacet
facet normal 0.0 0.0 -1.0 //Top, OK
outer loop vertex 0.0 0.0 7.5 vertex 5 0.0 7.5 vertex 5 2.5 7.5 endloop
endfacet
facet normal 0.0 0.0 -1.0 //Top, OK
outer loop vertex 0.0 0.0 7.5 vertex 5 2.5 7.5 vertex 0.0 2.5 7.5 endloop
endfacet
facet normal -1.0 0.0 0.0 //One of the sides 1, OK
outer loop vertex 0.0 0.0 0.0 vertex 0.0 0.0 7.5 vertex 0.0 2.5 0.0 endloop
endfacet
facet normal -1.0 0.0 0.0 //One of the sides 1, OK
outer loop vertex 0.0 0.0 7.5 vertex 0.0 2.5 7.5 vertex 0.0 2.5 0.0 endloop
endfacet
facet normal 1.0 0.0 0.0 //One of the sides 2, OK
outer loop vertex 5 0.0 0.0 vertex 5 2.5 0.0 vertex 5 0.0 7.5 endloop
endfacet
facet normal 1.0 0.0 0.0 //One of the sides 2, OK
outer loop vertex 5 0.0 7.5 vertex 5 2.5 0.0 vertex 5 2.5 7.5 endloop
endfacet
facet normal 0.0 -1.0 0.0 //One of the sides 3, OK
outer loop vertex 0.0 0.0 0.0 vertex 5 0.0 0.0 vertex 0.0 0.0 7.5 endloop
endfacet
facet normal 0.0 -1.0 0.0 //One of the sides 3, OK
outer loop vertex 0.0 0.0 7.5 vertex 5 0.0 0.0 vertex 5 0.0 7.5 endloop
endfacet
facet normal 0.0 1.0 0.0 // Side 4, OK
outer loop vertex 0.0 2.5 0.0 vertex 0.0 2.5 7.5 vertex 5 2.5 0.0 endloop
endfacet
facet normal 0.0 1.0 0.0 // Side 4, OK
outer loop vertex 0.0 2.5 7.5 vertex 5 2.5 7.5 vertex 5 2.5 0.0 endloop
endfacet
facet normal 0.0 0.0 -1.0 //Power Indicator
outer loop vertex 5 -2.5 1.25 vertex 3.75 0 1.25 vertex 2.5 -2.5 1.25 endloop
endfacet
facet normal 0.0 0.0 -1.0 //Data Indicator
outer loop vertex 1.25 -1.5 1.25 vertex 2.5 0 1.25 vertex 0 0 1.25 endloop
endfacet
endsolid
Device Logic Variables | Type | Min | Max | Read | Write | Device Specific Behaviours |
---|---|---|---|---|---|---|
Power | bool | 0 | 1 | ✔ | ❌ | |
Open | bool | 0 | 1 | ✔ | ✔ | Motherboard tray state |
Error | bool | 0 | 1 | ✔ | ❌ | |
Lock | bool | 0 | 1 | ✔ | ✔ | |
On | bool | 0 | 1 | ✔ | ✔ | |
RequiredPower | int | -1 | 200 | ✔ | ❌ | |
PrefabHash | int | -626563514 | -626563514 | ✔ | ❌ | |
ReferenceId | int | ✔ | ❌ |
Slot |
Name Class |
Icon |
Slot |
Name Class |
Icon |
Slot |
Name Class |
Icon |
||
---|---|---|---|---|---|---|---|---|---|---|
0 | Data Disk Data Disk |
![]() |
1 | Data Disk Data Disk |
![]() |
2 | Motherboard Motherboard |
![]() |
Connections | Port | Description |
---|---|---|
Data | 0 | |
Power | 1 |
The Laptop functions as a portable IC editor. To operate the Laptop it must be powered with a battery, have a IC Editor Motherboard in the motherboard slot, and an Integrated Circuit (IC10) in the Programmable Chip Slot.
You must place the laptop down to interact with the onsreen UI.
Laptop | ||
---|---|---|
![]() |
![]() |
|
____________ General ____________ | ____________ | ____________ |
Paintable | ✔ | |
Nameable | ✔ | |
Prefab Hash | 141535121 | |
Prefab Name | ItemLaptop | |
______________ Item ______________ | ____________ | ____________ |
Stack Size | 1 | |
Class | Tool | 17 |
SortingClass | Tools | 2 |
____________ Durability ____________ | ____________ | ____________ |
Flashpoint Temperature | 100℃ | |
Autoignition Temperature | 300℃ | |
____________ Power ____________ | ____ Min ____ | ____ Max ____ |
Power Use | 0W | 0W |
Heat Generation |
Made In | Electronics Printer T2 |
---|---|
![]() |
|
Time | |
Energy | 1500 |
Gold Au |
12g |
Copper Cu |
5.5g |
Steel | 2g |
Electrum | 5g |
Solder | 5g |
Device Logic Variables | Type | Min | Max | Read | Write | Device Specific Behaviours |
---|---|---|---|---|---|---|
Power | bool | 0 | 1 | ✔ | ❌ | |
Error | bool | 0 | 1 | ✔ | ❌ | |
PressureExternal | float | 0 | ✔ | ❌ | ||
On | bool | 0 | 1 | ✔ | ✔ | |
TemperatureExternal | float | 0 | ✔ | ❌ | ||
PositionX | float | ✔ | ❌ | |||
PositionY | float | ✔ | ❌ | |||
PositionZ | float | ✔ | ❌ | |||
ReferenceId | int | ✔ | ❌ |
Slot |
Name Class |
Icon |
Slot |
Name Class |
Icon |
Slot |
Name Class |
Icon |
||
---|---|---|---|---|---|---|---|---|---|---|
0 | Programmable Chip Programmable Chip |
![]() |
1 | Battery Battery |
![]() |
2 | Motherboard Motherboard |
![]() |
Logic Slots | Type | Min | Max | Read | Write | Slots | Device Specific Behaviours |
---|---|---|---|---|---|---|---|
Occupied | bool | 0 | 1 | ✔ | ❌ | 0,1,2 | |
OccupantHash | int | ✔ | ❌ | 0,1,2 | |||
Quantity | 0 | ✔ | ❌ | 0,1,2 | |||
Damage | float | 0 | 1 | ✔ | ❌ | 0,1,2 | |
Charge | int | 0 | ✔ | ❌ | 1 | ||
ChargeRatio | float | 0 | 1 | ✔ | ❌ | 1 | |
Class ? | int | 0 | 34 | ✔ | ❌ | 0,1,2 | |
MaxQuantity | 0 | ✔ | ❌ | 0,1,2 |
When placed in a Computer and connected to a Landingpad Data And Power, a Medium Satellite Dish, and a Vending Machine allows Stationeers to trade with suppliers. Adjust the horizontal and vertical attributes of the Medium Satellite Dish either directly or through logic. You need a communications signal of 95% or above to establish reliable communications with a trader. A minimum of a 3x3 clear pad area with a Landingpad Center at the center is required for a trader to land.
-
Expand to show UI.
Communications Motherboard | ||
---|---|---|
![]() |
![]() |
|
____________ General ____________ | ____________ | ____________ |
Paintable | ❌ | |
Nameable | ❌ | |
Prefab Hash | -337075633 | |
Prefab Name | MotherboardComms | |
______________ Item ______________ | ____________ | ____________ |
Stack Size | 1 | |
Class | Motherboard | 6 |
SortingClass | Default | 0 |
____________ Durability ____________ | ____________ | ____________ |
Flashpoint Temperature | 100℃ | |
Autoignition Temperature | 300℃ |
Made In | Electronics Printer T1 | Electronics Printer T2 |
---|---|---|
![]() |
![]() |
|
Time | ||
Energy | 10 | |
Gold Au |
5g | 5g |
Copper Cu |
5g | 5g |
Silver Ag |
5g | 5g |
Electrum | 2g | 2g |
Motherboards are connected to Computers to perform various technical functions.
The Norsec-designed K-cops 10-10 sorter motherboard permits Stationeers to control which items a Sorter does, and does not, permit to pass.
-
Expand to show UI.
Sorter Motherboard | ||
---|---|---|
![]() |
![]() |
|
____________ General ____________ | ____________ | ____________ |
Paintable | ❌ | |
Nameable | ❌ | |
Prefab Hash | -1908268220 | |
Prefab Name | MotherboardSorter | |
______________ Item ______________ | ____________ | ____________ |
Stack Size | 1 | |
Class | Motherboard | 6 |
SortingClass | Default | 0 |
____________ Durability ____________ | ____________ | ____________ |
Flashpoint Temperature | 100℃ | |
Autoignition Temperature | 300℃ |
Made In | Electronics Printer T1 | Electronics Printer T2 |
---|---|---|
![]() |
![]() |
|
Time | ||
Energy | 10 | |
Gold Au |
5g | 5g |
Silver Ag |
5g | 5g |
When placed in a Computer, the IC Editor allows players to write and edit IC code, which can then be uploaded to a Integrated Circuit (IC10) if housed in an IC Housing.
IC Editor Motherboard | ||
---|---|---|
![]() |
![]() |
|
____________ General ____________ | ____________ | ____________ |
Paintable | ❌ | |
Nameable | ❌ | |
Prefab Hash | -161107071 | |
Prefab Name | MotherboardProgrammableChip | |
______________ Item ______________ | ____________ | ____________ |
Stack Size | 1 | |
Class | Motherboard | 6 |
SortingClass | Default | 0 |
____________ Durability ____________ | ____________ | ____________ |
Flashpoint Temperature | 100℃ | |
Autoignition Temperature | 300℃ |
Made In | Electronics Printer T1 | Electronics Printer T2 |
---|---|---|
![]() |
![]() |
|
Time | ||
Energy | 10 | |
Gold Au |
5g | 5g |
Copper Cu |
5g | 5g |
Motherboards are connected to Computers to perform various technical functions.
The Norsec-designed K-cops logic motherboard allows Stationeers to set variables and actions on specific logic-controlled items.
Logic Motherboard | ||
---|---|---|
![]() |
![]() |
|
____________ General ____________ | ____________ | ____________ |
Paintable | ❌ | |
Nameable | ❌ | |
Prefab Hash | 502555944 | |
Prefab Name | MotherboardLogic | |
______________ Item ______________ | ____________ | ____________ |
Stack Size | 1 | |
Class | Motherboard | 6 |
SortingClass | Default | 0 |
____________ Durability ____________ | ____________ | ____________ |
Flashpoint Temperature | NA | |
Autoignition Temperature | NA |
Made In | Electronics Printer T1 | Electronics Printer T2 |
---|---|---|
![]() |
![]() |
|
Time | ||
Energy | 10 | |
Gold Au |
5g | 5g |
Copper Cu |
5g | 5g |