• Home
• Technical Standards
  • Naming
  • Gas Mixes
  • Color Coding
  • Coding Standards
  • Safety Standards
  • Signs

Color		Wire	Pipe	Element	Ice	Alloy	IC10
White			O₂	Si	Oxi	Astroloy
Green			N₂	U	Nit	Hastelloy
Black			CO₂	C		Solder
Pink			Vol		Vol
Yellow				Au		Electrum	Safety
Blue			H₂O	Co	Wat	Stellite
Grey			Air	Ag		Steel
Red			Fuel	Ni
Brown				Fe
Orange				Cu		Inconel
Khaki			X
Purple			N₂O	Pb		Waspaloy

alias rVariable r0
define cConstant 273.15
alias dDevice d0
define DDeviceHash -41235624

alias dDeviceA d0
define DDEVICES -5246257
define cConstant 1.542
alias rDeviceA.Pressure r15
alias rDeviceA.Temperature r14
alias rDEVICES.Pressure r13
alias rDEVICES.Temperature r12
alias rDeviceA.TemperatureC r11

Program.Example.Main:
  brdns dDeviceA 3
    l rDeviceA.Pressure dDeviceA Pressure
    l rDeviceA.Temperature dDeviceA Temperature #__/<-
  lb rDEVICES.Pressure DDEVICES Pressure Average
  lb rDEVICES.Temperature DDEVICES Temperature Average
  yield
j Program.Example.Main 

• Living spaces must be kept between 0℃-40℃
• Living spaces should have an atmosphere composed of air.
• Pressure should be 80kPa-120kPa

• Canister fillers should have a pressure regulator of some kind.
• Canister fillers should have a back pressure regulator of some kind to account for thermal expansion of gas.

1. O₂ and N₂ canister fill stations didn't have back pressure regulators or other safety systems.
2. One of the canisters exploded, rupturing the surrounding pipes, and damaging some larger tanks.
3. Volatiles, nitrogen and oxygen pipes ruptured and high pressure gas filled the room.
4. Some time after the first rupture, surrounding walls started to break, releasing the high pressure gas to surrounding rooms.
5. Many seconds after the initial rupture, An outside wall broke, and exposed the high pressure explosive gas mixture to 460℃ Venusian air, instantly igniting the gas mixture.
6. The fire caused a huge pressure and temperature spike in the already high pressure gas, causing more walls to break even faster, and spreading the fire to all rooms connected to the origin point.

• Electrical rooms must have some form of cooling and or ventilation to prevent overheating.

• Oxidizers and volatiles should be stored in separate tanks.
• Pre-mixed fuel should not be stored.
  • Small amounts of Pre-mixed fuel may exist in small pipe networks.

• The fuel storage of the rocket should be connected to a cryogenic cooler at all times when on the launch pad.
• There must be a way to evacuate the contents of the tanks to a safe location in case of over pressure.

• The cryogenic cooler temperature should be monitored and an alarm activated if the temperature rises above 100K (-173.15℃) for any reason.
  • The temperature reading should be taken from the output network.

Furnace Explosion Maximum Affected Area (Might not be the absolute maximum possible)

Composter have different safety requirements based on if they are placed outdoors or indoors.

• Advanced Composters should be placed far away from air intakes and exhaust ports.

• Advanced Composters should be located in a sealed room and accessible via an airlock.
  • The room needs to be pressure regulated to prevent over or under pressure failure.

• These symbols have been or will be assigned a certain meaning when on a sign.