• Home
• Pipes
• Pressure Regulators
  • Kit (Pressure Regulator)
    • Structure (Pressure Regulator)
    • Structure (Back Pressure Regulator)
    • Structure (Pressurant Valve)
    • Structure (Purge Valve)
• Liquid Regulators
  • Kit (Liquid Regulator)
    • Structure (Liquid Volume Regulator)
    • Structure (Liquid Back Volume Regulator)

---

---

This kit produces a single Pressure Regulator.

Kit (Pressure Regulator)
____________ General ____________	____________	____________
Paintable	❌
Prefab Hash	1181371795
Prefab Name	ItemKitRegulator
______________ Item ______________	____________	____________
Stack Size	5
Class	None	0
SortingClass	Kits	1
____________ Durability ____________	____________	____________
Flashpoint Temperature	700℃
Autoignition Temperature	1200℃

Made In	Hydraulic Pipe Bender T1	Hydraulic Pipe Bender T2
Time
Energy	500
Iron Fe	5g	5g
Gold Au	1g	1g
Copper Cu	2g	2g

---

Controlling the flow of gas between two pipe networks, pressure regulators shift gas until a set pressure on the outlet side is achieved, or the gas supply is exhausted. The back pressure regulator, by contrast, will only operate when pressure on the intake side exceeds the set value. With a max pressure of over 20,000kPa, it requires power to operate.

• Gas movement rate is linear with pressure differential of input and output.

  
  

Pressure Regulator	PR
____________ General ____________	______________	______________
Paintable	✔
Prefab Hash	209854039
Prefab Name	StructurePressureRegulator
____________ Durability ____________	______________	______________
Flashpoint Temperature	NA
Autoignition Temperature	NA
_________ Construction _________	______________	______________
Placement Cost	Kit (Pressure Regulator)	1
.............................................................	.........................	.........................
Deconstruction Tool	Hand Drill
____________ Power ____________	____ Min ____	____ Max ____
Power Use	100W	100W
Heat Generation	20W	20W

Placement			Dimensions
Snapping	Small Grid		Length	1
Rotation	Any		Height	1
Required Support	None		Width	1

Device Logic Variables	Type	Min	Max	Read	Write	Device Specific Behaviours
Power	bool	0	1	✔	❌
Error	bool	0	1	✔	❌
Lock	bool	0	1	✔	✔
Setting	float	0	60,795	✔	✔	Sets minimum output pressure, in kPa.
Maximum	int	60,795	60,795	✔	❌
Ratio	float	0	1	✔	❌
On	bool	0	1	✔	✔
RequiredPower	float	-1	100	✔	❌
PrefabHash	int	209854039	209854039	✔	❌
ReferenceId	int			✔	❌

Connections
Pipe Input	0
Pipe Output	1
Power And Data	2

---

Unlike the Pressure Regulator, which closes when the input exceeds a given pressure, the back pressure regulator opens when input pressure reaches a given value.

Back Pressure Regulator	BPR
____________ General ____________	______________	______________
Paintable	✔
Prefab Hash	-1149857558
Prefab Name	StructureBackPressureRegulator
____________ Durability ____________	______________	______________
Flashpoint Temperature	NA
Autoignition Temperature	NA
_________ Construction _________	______________	______________
Placement Cost	Kit (Pressure Regulator)	1
.............................................................	.........................	.........................
Deconstruction Tool	Hand Drill
____________ Power ____________	____ Min ____	____ Max ____
Power Use	100W	100W
Heat Generation	20W	20W

Placement			Dimensions
Snapping	Small Grid		Length	1
Rotation	Any		Height	1
Required Support	None		Width	1

Device Logic Variables	Type	Min	Max	Read	Write	Device Specific Behaviours
Power	bool	0	1	✔	❌
Error	bool	0	1	✔	❌
Lock	bool	0	1	✔	✔
Setting	float	0	60,795	✔	✔	Sets maximum input pressure, in kPa.
Maximum	int	60,795	60,795	✔	❌
Ratio	float	0	1	✔	❌
On	bool	0	1	✔	✔
RequiredPower	float	-1	100	✔	❌
PrefabHash	int	-1149857558	-1149857558	✔	❌
ReferenceId	int			✔	❌

Connections
Pipe Input	0
Pipe Output	1
Power And Data	2

---

Pumps gas into a liquid pipe in order to raise the pressure

Pressurant Valve	PrV
____________ General ____________	______________	______________
Paintable	✔
Prefab Hash	23052817
Prefab Name	StructurePressurantValve
____________ Durability ____________	______________	______________
Flashpoint Temperature	NA
Autoignition Temperature	NA
_________ Construction _________	______________	______________
Placement Cost	Kit (Pressure Regulator)	1
.............................................................	.........................	.........................
Deconstruction Tool	Hand Drill
____________ Power ____________	____ Min ____	____ Max ____
Power Use	100W	100W
Heat Generation	20W	20W

Placement			Dimensions
Snapping	Small Grid		Length	1
Rotation	Any		Height	1
Required Support	None		Width	1

Device Logic Variables	Type	Min	Max	Read	Write	Device Specific Behaviours
Power	bool	0	1	✔	❌
Error	bool	0	1	✔	❌
Lock	bool	0	1	✔	✔
Setting	float	0	60,795	✔	✔	Sets minimum output pressure, in kPa.
Maximum	int	60,795	60,795	✔	❌
Ratio	float	0	1	✔	❌
On	bool	0	1	✔	✔
RequiredPower	float	-1	100	✔	❌
PrefabHash	int	23052817	23052817	✔	❌
ReferenceId	int			✔	❌

Connections
Pipe Input	0
PipeLiquid Output	1
Power And Data	2

---

Allows for removal of pressurant gas and evaporated liquids from a liquid pipe. Similar in function to a Back Pressure Regulator the Purge Valve moves gas from the input liquid pipe to the output gas pipe aiming to keep the pressure of the input at the target setting.

Purge Valve	PuV
____________ General ____________	______________	______________
Paintable	✔
Prefab Hash	-737232128
Prefab Name	StructurePurgeValve
____________ Durability ____________	______________	______________
Flashpoint Temperature	NA
Autoignition Temperature	NA
_________ Construction _________	______________	______________
Placement Cost	Kit (Pressure Regulator)	1
.............................................................	.........................	.........................
Deconstruction Tool	Hand Drill
____________ Power ____________	____ Min ____	____ Max ____
Power Use	100W	100W
Heat Generation	20W	20W

Placement			Dimensions
Snapping	Small Grid		Length	1
Rotation	Any		Height	1
Required Support	None		Width	1

Device Logic Variables	Type	Min	Max	Read	Write	Device Specific Behaviours
Power	bool	0	1	✔	❌
Error	bool	0	1	✔	❌
Lock	bool	0	1	✔	✔
Setting	float	0	60,795	✔	✔	Sets maximum input pressure, in kPa.
Maximum	int	60,795	60,795	✔	❌
Ratio	float	0	1	✔	❌
On	bool	0	1	✔	✔
RequiredPower	float	-1	100	✔	❌
PrefabHash	int	-737232128	-737232128	✔	❌
ReferenceId	int			✔	❌

Connections
PipeLiquid Input	0
Pipe Output	1
Power And Data	2

---

---

Kit (Liquid Regulator)
____________ General ____________	____________	____________
Paintable	❌
Prefab Hash	482248766
Prefab Name	ItemKitLiquidRegulator
______________ Item ______________	____________	____________
Stack Size	5
Class	None	0
SortingClass	Kits	1
____________ Durability ____________	____________	____________
Flashpoint Temperature	700℃
Autoignition Temperature	1200℃

Made In	Hydraulic Pipe Bender T1	Hydraulic Pipe Bender T2
Time
Energy	500
Iron Fe	5g	5g
Gold Au	1g	1g
Copper Cu	2g	2g

---

Regulates the volume ratio of liquid in the output Liquid pipe. This is expressed as percentage where 100 is totally full and 0 is empty.

• Acts like a one way valve for gasses, when on.

Liquid Volume Regulator	LVR
____________ General ____________	______________	______________
Paintable	✔
Prefab Hash	482248766
Prefab Name	StructureLiquidPressureRegulator
____________ Durability ____________	______________	______________
Flashpoint Temperature	NA
Autoignition Temperature	NA
_________ Construction _________	______________	______________
Placement Cost	Kit (Liquid Regulator)	1
.............................................................	.........................	.........................
Deconstruction Tool	Hand Drill
____________ Power ____________	____ Min ____	____ Max ____
Power Use	100W	100W
Heat Generation	20W	20W

Placement			Dimensions
Snapping	Small Grid		Length	1
Rotation	Any		Height	1
Required Support	None		Width	1

Device Logic Variables	Type	Min	Max	Read	Write	Device Specific Behaviours
Power	bool	0	1	✔	❌
Error	bool	0	1	✔	❌
Lock	bool	0	1	✔	✔
Setting	float	0	100	✔	✔	Sets minimum liquid volume of output, in %.
Maximum	int	100	100	✔	❌
Ratio	float	0	1	✔	❌
On	bool	0	1	✔	✔
RequiredPower	float	-1	100	✔	❌
PrefabHash	int	482248766	482248766	✔	❌
ReferenceId	int			✔	❌

Connections
PipeLiquid Input	0
PipeLiquid Output	1
Power And Data	2

---

Regulates the volume ratio of liquid in the input Liquid pipe. This is expressed as percentage where 100 is totally full and 0 is empty.

• Acts like a one way valve for gasses, when on.

Liquid Back Volume Regulator	LBVR
____________ General ____________	______________	______________
Paintable	✔
Prefab Hash	2099900163
Prefab Name	StructureBackLiquidPressureRegulator
____________ Durability ____________	______________	______________
Flashpoint Temperature	NA
Autoignition Temperature	NA
_________ Construction _________	______________	______________
Placement Cost	Kit (Liquid Regulator)	1
.............................................................	.........................	.........................
Deconstruction Tool	Hand Drill
____________ Power ____________	____ Min ____	____ Max ____
Power Use	100W	100W
Heat Generation	20W	20W

Placement			Dimensions
Snapping	Small Grid		Length	1
Rotation	Any		Height	1
Required Support	None		Width	1

Device Logic Variables	Type	Min	Max	Read	Write	Device Specific Behaviours
Power	bool	0	1	✔	❌
Error	bool	0	1	✔	❌
Lock	bool	0	1	✔	✔
Setting	float	0	100	✔	✔	Sets maximum liquid volume of input, in %.
Maximum	int	100	100	✔	❌
Ratio	float	0	1	✔	❌
On	bool	0	1	✔	✔
RequiredPower	float	-1	100	✔	❌
PrefabHash	int	2099900163	2099900163	✔	❌
ReferenceId	int			✔	❌

Connections
PipeLiquid Input	0
PipeLiquid Output	1
Power And Data	2

---