Page Index - rfrht/FT991A-PAT GitHub Wiki
40 page(s) in this GitHub Wiki:
- Home
- FT-991/A Panadapter - Documentation and Instructions
- 01 - Project Overview
- 02 - Technical Details
- 03 - Advantages
- 04 - Building the Board
- 05 - Testing
- 06 - Main Unit USB Controller Replacement
- 07 - Install
- 08 - Software Configuration
- 09 - Acknowledgments
- Appendix 1 - The Light Edition Board
- Appendix 2 - Other install possibilities
- Appendix 3 - Raising the bar: Embedding an RSP1A instead of an RTL-SDR
- Appendix 4 - Directly tuning the IF frequency
- Appendix 5 - Using RTL-SDR GPIO Ports
- Appendix 6 - FT-991/A Input Preselector Filter characterization
- Appendix 7 - Sharing your serial port with other applications
- Appendix 8 - IC-7300 implementation
- acknowledgments
- advantages
- appendix assembly variations
- appendix built in rtl sdr bandpass filter
- appendix ft 991 a menu settings
- appendix implementing in a ic 7300
- appendix panadapter insertion loss
- appendix pe4259 grounded rf port when port is not selected
- appendix preselector rx stage characteristics
- appendix rsp1a
- appendix rtl sdr gpio
- appendix sharing serial port
- appendix the light edition
- building the board
- Directly Tune FT 991 A IF Frequency
- installation
- project overview
- software configuration
- technical description
- testing
- usb controller replacement