How to Install Advanced Gam
Use these steps if you have never used any version of GAM in your domain. They will create your GAM project and all necessary authentications.
In these examples, your Google Super admin is shown as admin@domain.com; replace with the actual email adddress.
In these examples, the user home folder is shown as /Users/admin; adjust according to your specific situation; e.g., /home/administrator.
This example assumes that GAMADV-XTD3 has been installed in /Users/admin/bin/gamadv-xtd3. If you've installed GAMADV-XTD3 in another directory, substitute that value in the directions.
The default GAM configuration directory is /Users/admin/.gam; for more flexibility you probably want to select a non-hidden location. This example assumes that the GAM configuration directory will be /Users/admin/GAMConfig; If you've chosen another directory, substitute that value in the directions.
Add the following line:
export GAMCFGDIR="/Users/admin/GAMConfig"
to one of these files based on your shell:
~/.bash_profile
~/.bashrc
~/.zshrc
~/.profile
You need to enable this setting in the environment. The easiest way is probably to close your terminal and open a new session. This will load the environment variables, including the one you just added. Test this by issuing this command:
echo $GAMCFGDIR
This should print the name of the directory you used above.
Alternatively, without starting a new session, load the new variable in this session directly: issue the following command replacing <Filename>
with the name of the file you edited:
source <Filename>
You need to make sure the GAM configuration directory actually exists. Test that like this:
ls -l $GAMCFGDIR
If this gives you an error, make the directory:
mkdir -p $GAMCFGDIR
You should establish a GAM working directory; you will store your GAM related data in this folder and execute GAM commands from this folder. You should not use /Users/admin/bin/gamadv-xtd3 or /Users/admin/GAMConfig for this purpose. This example assumes that the GAM working directory will be /Users/admin/GAMWork; If you've chosen another directory, substitute that value in the directions.
- Make the /Users/admin/GAMWork directory before proceeding.
You should set an alias to point to /Users/admin/bin/gamadv-xtd3/gam so you can operate from the /Users/admin/GAMWork directory. Aliases aren't available in scripts, so you may want to set a symlink instead, see below.
Add the following line:
alias gam="/Users/admin/bin/gamadv-xtd3/gam"
to one of these files based on your shell:
~/.bash_aliases
~/.bash_profile
~/.bashrc
~/.zshrc
~/.profile
Issue the following command replacing <Filename>
with the name of the file you edited:
source <Filename>
Set a symlink in /usr/local/bin
(or some other location on $PATH) to point to GAM.
ln -s "/Users/admin/bin/gamadv-xtd3/gam" /usr/local/bin/gam
admin@server:~$ cd /Users/admin/bin/gamadv-xtd3
admin@server:/Users/admin/bin/gamadv-xtd3$ ./gam config drive_dir /Users/admin/GAMWork verify
Created: /Users/admin/GAMConfig
Created: /Users/admin/GAMConfig/gamcache
Config File: /Users/admin/GAMConfig/gam.cfg, Initialized
Section: DEFAULT
activity_max_results = 100
...
[long list of all config settings that should match the directories you specified]
...
admin@server:/Users/admin/bin/gamadv-xtd3$
admin@server:/Users/admin/bin/gamadv-xtd3$ ls -l $GAMCFGDIR
total 48
-rw-r-----+ 1 admin staff 1069 Mar 3 09:23 gam.cfg
drwxr-x---+ 2 admin staff 68 Mar 3 09:23 gamcache
-rw-rw-rw-+ 1 admin staff 0 Mar 3 09:23 oauth2.txt.lock
admin@server:/Users/admin/bin/gamadv-xtd3$
admin@server:/Users/admin/bin/gamadv-xtd3$ gam create project
WARNING: Config File: /Users/admin/GAMConfig/gam.cfg, Item: client_secrets_json, Value: /Users/admin/GAMConfig/client_secrets.json, Not Found
WARNING: Config File: /Users/admin/GAMConfig/gam.cfg, Item: oauth2service_json, Value: /Users/admin/GAMConfig/oauth2service.json, Not Found
Enter your Google Workspace admin or GCP project manager email address authorized to manage project(s) admin@domain.com
Your browser has been opened to visit:
https://accounts.google.com/o/oauth2/v2/auth?client_id=CLI...response_type=code
If your browser is on a different machine then press CTRL+C,
set no_browser = true in gam.cfg and re-run this command.
Authentication successful.
Creating project "GAM Project"...
Checking project status...
Project: gam-project-abc-def-ghi, Enable 23 APIs
API: admin.googleapis.com, Enabled (1/23)
API: alertcenter.googleapis.com, Enabled (2/23)
API: appsactivity.googleapis.com, Enabled (3/23)
API: audit.googleapis.com, Enabled (4/23)
API: calendar-json.googleapis.com, Enabled (5/23)
API: chat.googleapis.com, Enabled (6/23)
API: classroom.googleapis.com, Enabled (7/23)
API: contacts.googleapis.com, Enabled (8/23)
API: drive.googleapis.com, Enabled (9/23)
API: driveactivity.googleapis.com, Enabled (10/23)
API: gmail.googleapis.com, Enabled (11/23)
API: groupsmigration.googleapis.com, Enabled (12/23)
API: groupssettings.googleapis.com, Enabled (13/23)
API: iam.googleapis.com, Enabled (14/23)
API: iap.googleapis.com, Enabled (15/23)
API: licensing.googleapis.com, Enabled (16/23)
API: people.googleapis.com, Enabled (17/23)
API: pubsub.googleapis.com, Enabled (18/23)
API: reseller.googleapis.com, Enabled (19/23)
API: sheets.googleapis.com, Enabled (20/23)
API: siteverification.googleapis.com, Enabled (21/23)
API: storage-api.googleapis.com, Enabled (22/23)
API: vault.googleapis.com, Enabled (23/23)
Setting GAM project consent screen...
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Enabled
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Generating new private key
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Extracting public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Done generating private key and public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Service Account Key: SVCACCTKEY, Uploaded
Service Account OAuth2 File: /Users/admin/GAMConfig/oauth2service.json, Service Account Key: SVCACCTKEY, Updated
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Has rights to rotate own private key
Please go to:
https://console.cloud.google.com/apis/credentials/oauthclient?project=gam-project-abc-def-ghi
1. Choose "Desktop App" or "Other" for "Application type".
2. Enter "GAM" or another desired value for "Name".
3. Click the blue "Create" button.
4. Copy your "client ID" value that shows on the next page.
Enter your Client ID: CLIENTID
5. Go back to your browser and copy your "client secret" value.
Enter your Client Secret: CLIENTSECRET
6. Go back to your browser and click OK to close the "OAuth client" popup if it's still open.
That's it! Your GAM Project is created and ready to use.
admin@server:/Users/admin/bin/gamadv-xtd3$
admin@server:/Users/admin/bin/gamadv-xtd3$ gam config no_browser true save
admin@server:/Users/admin/bin/gamadv-xtd3$ gam create project
WARNING: Config File: /Users/admin/GAMConfig/gam.cfg, Item: client_secrets_json, Value: /Users/admin/GAMConfig/client_secrets.json, Not Found
WARNING: Config File: /Users/admin/GAMConfig/gam.cfg, Item: oauth2service_json, Value: /Users/admin/GAMConfig/oauth2service.json, Not Found
Enter your Google Workspace admin or GCP project manager email address authorized to manage project(s) admin@domain.com
Go to the following link in a browser on other computer:
https://accounts.google.com/o/oauth2/v2/auth?re... m&prompt=consent
Enter verification code: abc...xyz
Authentication successful.
Creating project "GAM Project"...
Checking project status...
Project: gam-project-abc-def-ghi, Enable 23 APIs
API: admin.googleapis.com, Enabled (1/23)
API: alertcenter.googleapis.com, Enabled (2/23)
API: appsactivity.googleapis.com, Enabled (3/23)
API: audit.googleapis.com, Enabled (4/23)
API: calendar-json.googleapis.com, Enabled (5/23)
API: chat.googleapis.com, Enabled (6/23)
API: classroom.googleapis.com, Enabled (7/23)
API: contacts.googleapis.com, Enabled (8/23)
API: drive.googleapis.com, Enabled (9/23)
API: driveactivity.googleapis.com, Enabled (10/23)
API: gmail.googleapis.com, Enabled (11/23)
API: groupsmigration.googleapis.com, Enabled (12/23)
API: groupssettings.googleapis.com, Enabled (13/23)
API: iam.googleapis.com, Enabled (14/23)
API: iap.googleapis.com, Enabled (15/23)
API: licensing.googleapis.com, Enabled (16/23)
API: people.googleapis.com, Enabled (17/23)
API: pubsub.googleapis.com, Enabled (18/23)
API: reseller.googleapis.com, Enabled (19/23)
API: sheets.googleapis.com, Enabled (20/23)
API: siteverification.googleapis.com, Enabled (21/23)
API: storage-api.googleapis.com, Enabled (22/23)
API: vault.googleapis.com, Enabled (23/23)
Setting GAM project consent screen...
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Enabled
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Generating new private key
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Extracting public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Done generating private key and public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Service Account Key: SVCACCTKEY, Uploaded
Service Account OAuth2 File: /Users/admin/GAMConfig/oauth2service.json, Service Account Key: SVCACCTKEY, Updated
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Has rights to rotate own private key
Please go to:
https://console.cloud.google.com/apis/credentials/oauthclient?project=gam-project-abc-def-ghi
1. Choose "Desktop App" or "Other" for "Application type".
2. Enter "GAM" or another desired value for "Name".
3. Click the blue "Create" button.
4. Copy your "client ID" value that shows on the next page.
Enter your Client ID: CLIENTID
5. Go back to your browser and copy your "client secret" value.
Enter your Client Secret: CLIENTSECRET
6. Go back to your browser and click OK to close the "OAuth client" popup if it's still open.
That's it! Your GAM Project is created and ready to use.
admin@server:/Users/admin/bin/gamadv-xtd3$
You select a list of scopes, GAM uses a browser to get final authorization from Google for these scopes and writes the credentials into the file oauth2.txt.
admin@server:/Users/admin/bin/gamadv-xtd3$ ./gam oauth create
[*] 0) Calendar API (supports readonly)
[*] 1) Chrome Browser Cloud Management API (supports readonly)
[*] 2) Chrome Management API - AppDetails read only
[*] 3) Chrome Management API - Telemetry read only
[*] 4) Chrome Management API - read only
[*] 5) Chrome Policy API (supports readonly)
[*] 6) Chrome Printer Management API (supports readonly)
[*] 7) Chrome Version History API
[*] 8) Classroom API - Course Announcements (supports readonly)
[*] 9) Classroom API - Course Topics (supports readonly)
[*] 10) Classroom API - Course Work/Materials (supports readonly)
[*] 11) Classroom API - Course Work/Submissions (supports readonly)
[*] 12) Classroom API - Courses (supports readonly)
[*] 13) Classroom API - Profile Emails
[*] 14) Classroom API - Profile Photos
[*] 15) Classroom API - Rosters (supports readonly)
[*] 16) Classroom API - Student Guardians (supports readonly)
[ ] 17) Cloud Channel API (supports readonly)
[*] 18) Cloud Identity - Inbound SSO Settings (supports readonly)
[*] 19) Cloud Identity Groups API (supports readonly)
[*] 20) Cloud Identity OrgUnits API (supports readonly)
[*] 21) Cloud Identity User Invitations API (supports readonly)
[ ] 22) Cloud Storage API (Read Only, Vault/Takeout Download, Cloud Storage)
[ ] 23) Cloud Storage API (Read/Write, Vault/Takeout Copy/Download, Cloud Storage)
[*] 24) Contact Delegation API (supports readonly)
[*] 25) Contacts API - Domain Shared Contacts and GAL
[*] 26) Data Transfer API (supports readonly)
[*] 27) Directory API - Chrome OS Devices (supports readonly)
[*] 28) Directory API - Customers (supports readonly)
[*] 29) Directory API - Domains (supports readonly)
[*] 30) Directory API - Groups (supports readonly)
[*] 31) Directory API - Mobile Devices Directory (supports readonly and action)
[*] 32) Directory API - Organizational Units (supports readonly)
[*] 33) Directory API - Resource Calendars (supports readonly)
[*] 34) Directory API - Roles (supports readonly)
[*] 35) Directory API - User Schemas (supports readonly)
[*] 36) Directory API - User Security
[*] 37) Directory API - Users (supports readonly)
[ ] 38) Email Audit API
[*] 39) Groups Migration API
[*] 40) Groups Settings API
[*] 41) License Manager API
[*] 42) People API (supports readonly)
[*] 43) People Directory API - read only
[ ] 44) Pub / Sub API
[*] 45) Reports API - Audit Reports
[*] 46) Reports API - Usage Reports
[ ] 47) Reseller API
[*] 48) Site Verification API
[ ] 49) Sites API
[*] 50) Vault API (supports readonly)
Select an unselected scope [ ] by entering a number; yields [*]
For scopes that support readonly, enter a number and an 'r' to grant read-only access; yields [R]
For scopes that support action, enter a number and an 'a' to grant action-only access; yields [A]
Clear read-only access [R] or action-only access [A] from a scope by entering a number; yields [*]
Unselect a selected scope [*] by entering a number; yields [ ]
Select all default scopes by entering an 's'; yields [*] for default scopes, [ ] for others
Unselect all scopes by entering a 'u'; yields [ ] for all scopes
Exit without changes/authorization by entering an 'e'
Continue to authorization by entering a 'c'
Note, if all scopes are selected, Google will probably generate an authorization error
Please enter 0-50[a|r] or s|u|e|c: c
Enter your Google Workspace admin email address? admin@domain.com
Go to the following link in a browser on this computer or on another computer:
https://accounts.google.com/o/oauth2/v2/auth?response_type=code&client_id=423565144751-10lsdt2lgnsch9jmdhl35uq4617u1ifp&redirect_uri=http%3A%2F%2F127.0.0.1%3A8080%2F&scope=...
If you use a browser on another computer, you will get a browser error that the site can't be reached AFTER you
click the Allow button, paste "Unable to connect" URL from other computer (only URL data up to &scope required):
Enter verification code or paste "Unable to connect" URL from other computer (only URL data up to &scope required):
The authentication flow has completed.
Client OAuth2 File: /Users/admin/GAMConfig/oauth2.txt, Created
admin@server:/Users/admin/bin/gamadv-xtd3$
If clicking on the link in the instructions does not work (i.e. you get a 404 or 400 error message, instead of something about 'unable to connect') the URL in the link is too long. Most likely, you have selected all scopes. Try again with fewer scopes until it works. (there is no harm in repeatedly trying)
admin@server:/Users/admin/bin/gamadv-xtd3$ ./gam user admin@domain.com check serviceaccount
$ gam user admin@domain.com check serviceaccount
System time status
Your system time differs from www.googleapis.com by less than 1 second PASS
Service Account Private Key Authentication
Authentication PASS
Service Account Private Key age; Google recommends rotating keys on a routine basis
Service Account Private Key age: 0 days PASS
Domain-wide Delegation authentication:, User: admin@domain.com, Scopes: 34
https://mail.google.com/ PASS (1/34)
https://sites.google.com/feeds PASS (2/34)
https://www.googleapis.com/auth/analytics.readonly PASS (3/34)
https://www.googleapis.com/auth/apps.alerts PASS (4/34)
https://www.googleapis.com/auth/calendar PASS (5/34)
https://www.googleapis.com/auth/chat.delete PASS (6/34)
https://www.googleapis.com/auth/chat.memberships PASS (7/34)
https://www.googleapis.com/auth/chat.messages PASS (8/34)
https://www.googleapis.com/auth/chat.spaces PASS (9/34)
https://www.googleapis.com/auth/classroom.announcements PASS (10/34)
https://www.googleapis.com/auth/classroom.coursework.students PASS (11/34)
https://www.googleapis.com/auth/classroom.courseworkmaterials PASS (12/34)
https://www.googleapis.com/auth/classroom.profile.emails PASS (13/34)
https://www.googleapis.com/auth/classroom.rosters PASS (14/34)
https://www.googleapis.com/auth/classroom.topics PASS (15/34)
https://www.googleapis.com/auth/cloud-identity PASS (16/34)
https://www.googleapis.com/auth/cloud-platform PASS (17/34)
https://www.googleapis.com/auth/contacts PASS (18/34)
https://www.googleapis.com/auth/contacts.other.readonly PASS (19/34)
https://www.googleapis.com/auth/datastudio PASS (20/34)
https://www.googleapis.com/auth/directory.readonly PASS (21/34)
https://www.googleapis.com/auth/documents PASS (22/34)
https://www.googleapis.com/auth/drive PASS (23/34)
https://www.googleapis.com/auth/drive.activity PASS (24/34)
https://www.googleapis.com/auth/drive.admin.labels FAIL (25/34)
https://www.googleapis.com/auth/drive.labels FAIL (26/34)
https://www.googleapis.com/auth/gmail.modify PASS (27/34)
https://www.googleapis.com/auth/gmail.settings.basic PASS (28/34)
https://www.googleapis.com/auth/gmail.settings.sharing PASS (29/34)
https://www.googleapis.com/auth/keep PASS (30/34)
https://www.googleapis.com/auth/spreadsheets PASS (31/34)
https://www.googleapis.com/auth/tasks PASS (32/34)
https://www.googleapis.com/auth/userinfo.profile PASS (33/34)
https://www.googleapis.com/auth/youtube.readonly PASS (34/34)
Some scopes FAILED!
To authorize them, please go to:
https://admin.google.com/ac/owl/domainwidedelegation?clientScopeToAdd=https://mail.go...huser=admin@domain.com
You will be directed to the Google Workspace admin console Security/API Controls/Domain-wide Delegation page
The "Add a new Client ID" box will open
Make sure that "Overwrite existing client ID" is checked
Click AUTHORIZE
When the box closes you're done
After authorizing it may take some time for this test to pass so wait a few moments and then try this command again.
admin@server:/Users/admin/bin/gamadv-xtd3$
The link shown in the error message should take you directly to the authorization screen. If not, make sure that you are logged in as a domain admin, then re-enter the link.
Wait a moment and then perform the following command; it it still fails, wait a bit longer, it can sometimes take serveral minutes for the authorization to complete.
admin@server:/Users/admin/bin/gamadv-xtd3$ ./gam user admin@domain.com check serviceaccount
System time status:
Your system time differs from www.googleapis.com by less than 1 second PASS
Service Account Private Key Authentication:
Authentication PASS
Domain-wide Delegation authentication:, User: admin@domain.com, Scopes: 34
https://mail.google.com/ PASS (1/34)
https://sites.google.com/feeds PASS (2/34)
https://www.googleapis.com/auth/analytics.readonly PASS (3/34)
https://www.googleapis.com/auth/apps.alerts PASS (4/34)
https://www.googleapis.com/auth/calendar PASS (5/34)
https://www.googleapis.com/auth/chat.delete PASS (6/34)
https://www.googleapis.com/auth/chat.memberships PASS (7/34)
https://www.googleapis.com/auth/chat.messages PASS (8/34)
https://www.googleapis.com/auth/chat.spaces PASS (9/34)
https://www.googleapis.com/auth/classroom.announcements PASS (10/34)
https://www.googleapis.com/auth/classroom.coursework.students PASS (11/34)
https://www.googleapis.com/auth/classroom.courseworkmaterials PASS (12/34)
https://www.googleapis.com/auth/classroom.profile.emails PASS (13/34)
https://www.googleapis.com/auth/classroom.rosters PASS (14/34)
https://www.googleapis.com/auth/classroom.topics PASS (15/34)
https://www.googleapis.com/auth/cloud-identity PASS (16/34)
https://www.googleapis.com/auth/cloud-platform PASS (17/34)
https://www.googleapis.com/auth/contacts PASS (18/34)
https://www.googleapis.com/auth/contacts.other.readonly PASS (19/34)
https://www.googleapis.com/auth/datastudio PASS (20/34)
https://www.googleapis.com/auth/directory.readonly PASS (21/34)
https://www.googleapis.com/auth/documents PASS (22/34)
https://www.googleapis.com/auth/drive PASS (23/34)
https://www.googleapis.com/auth/drive.activity PASS (24/34)
https://www.googleapis.com/auth/drive.admin.labels PASS (25/34)
https://www.googleapis.com/auth/drive.labels PASS (26/34)
https://www.googleapis.com/auth/gmail.modify PASS (27/34)
https://www.googleapis.com/auth/gmail.settings.basic PASS (28/34)
https://www.googleapis.com/auth/gmail.settings.sharing PASS (29/34)
https://www.googleapis.com/auth/keep PASS (30/34)
https://www.googleapis.com/auth/spreadsheets PASS (31/34)
https://www.googleapis.com/auth/tasks PASS (32/34)
https://www.googleapis.com/auth/userinfo.profile PASS (33/34)
https://www.googleapis.com/auth/youtube.readonly PASS (34/34)
All scopes PASSED!
Service Account Client name: SVCACCTID is fully authorized.
admin@server:/Users/admin/bin/gamadv-xtd3$
-
customer_id
- Having this data keeps Gam from having to make extra API calls -
domain
- This allows you to omit the domain portion of email addresses -
timezone local
- Gam will convert all UTC times to your local timezone
admin@server:/Users/admin/bin/gamadv-xtd3$ ./gam info domain
Customer ID: C01234567
Primary Domain: domain.com
Customer Creation Time: 2007-06-06T15:47:55.444Z
Primary Domain Verified: True
Default Language: en
...
admin@server:/Users/admin/bin/gamadv-xtd3$ ./gam config customer_id C01234567 domain domain.com timezone local save verify
Config File: /Users/admin/GAMConfig/gam.cfg, Saved
Section: DEFAULT
activity_max_results = 100
...
[long list of all config settings that should match the data you specified]
...
admin@server:/Users/admin/bin/gamadv-xtd3$
In these examples, your Google Super admin is shown as admin@domain.com; replace with the actual email adddress.
This example assumes that GAMADV-XTD3 has been installed in C:\GAMADV-XTD3; if you've installed GAMADV-XTD3 in another directory, substitute that value in the directions.
These steps assume Command Prompt, adjust if you're using PowerShell.
The default GAM configuration directory is C:\Users<UserName>.gam; for more flexibility you probably want to select a non user-specific location. This example assumes that the GAM configuration directory will be C:\GAMConfig; If you've chosen another directory, substitute that value in the directions.
- Make the C:\GAMConfig directory before proceeding.
You should extablish a GAM working directory; you will store your GAM related data in this folder and execute GAM commands from this folder. You should not use C:\GAMADV-XTD3 or C:\GAMConfig for this purpose. This example assumes that the GAM working directory will be C:\GAMWork; If you've chosen another directory, substitute that value in the directions.
- Make the C:\GAMWork directory before proceeding.
You should set the system path to point to C:\GAMADV-XTD3 so you can operate from the C:\GAMWork directory.
Start Control Panel
Click System
Click Advanced system settings
Click Environment Variables...
Click Path under System variables
Click Edit...
If C:\GAMADV-XTD3 is already on the Path, skip the next three steps
Click New
Enter C:\GAMADV-XTD3
Click OK
Click New
Set Variable name: GAMCFGDIR
Set Variable value: C:\GAMConfig
Click OK
Click OK
Click OK
Exit Control Panel
At this point, you should restart Command Prompt so that it has the updated path and environment variables.
C:>cd C:\GAMADV-XTD3
C:\GAMADV-XTD3>gam config drive_dir C:\GAMWork verify
Created: C:\GAMConfig
Created: C:\GAMConfig\gamcache
Config File: C:\GAMConfig\gam.cfg, Initialized
Section: DEFAULT
activity_max_results = 100
...
[long list of all config settings that should match the directories you specified]
...
C:\GAMADV-XTD3>
C:\GAMADV-XTD3>dir %GAMCFGDIR%
Volume in drive C has no label.
Volume Serial Number is 663F-DA8B
Directory of C:\GAMConfig
03/03/2017 10:16 AM <DIR> .
03/03/2017 10:16 AM <DIR> ..
03/03/2017 10:15 AM 1,125 gam.cfg
03/03/2017 10:15 AM <DIR> gamcache
03/03/2017 10:15 AM 0 oauth2.txt.lock
2 File(s) 15,769 bytes
3 Dir(s) 110,532,562,944 bytes free
C:\GAMADV-XTD3>
C:\GAMADV-XTD3>gam create project
WARNING: Config File: C:\GAMConfig\gam.cfg, Item: client_secrets_json, Value: C:\GAMConfig\client_secrets.json, Not Found
WARNING: Config File: C:\GAMConfig\gam.cfg, Item: oauth2service_json, Value: C:\GAMConfig\oauth2service.json, Not Found
Enter your Google Workspace admin or GCP project manager email address authorized to manage project(s) admin@domain.com
Your browser has been opened to visit:
https://accounts.google.com/o/oaut...pe=code
If your browser is on a different machine then press CTRL+C,
set no_browser = true in gam.cfg and re-run this command.
Authentication successful.
Creating project "GAM Project"...
Checking project status...
Project: gam-project-abc-def-ghi, Enable 23 APIs
API: admin.googleapis.com, Enabled (1/23)
API: alertcenter.googleapis.com, Enabled (2/23)
API: appsactivity.googleapis.com, Enabled (3/23)
API: audit.googleapis.com, Enabled (4/23)
API: calendar-json.googleapis.com, Enabled (5/23)
API: chat.googleapis.com, Enabled (6/23)
API: classroom.googleapis.com, Enabled (7/23)
API: contacts.googleapis.com, Enabled (8/23)
API: drive.googleapis.com, Enabled (9/23)
API: driveactivity.googleapis.com, Enabled (10/23)
API: gmail.googleapis.com, Enabled (11/23)
API: groupsmigration.googleapis.com, Enabled (12/23)
API: groupssettings.googleapis.com, Enabled (13/23)
API: iam.googleapis.com, Enabled (14/23)
API: iap.googleapis.com, Enabled (15/23)
API: licensing.googleapis.com, Enabled (16/23)
API: people.googleapis.com, Enabled (17/23)
API: pubsub.googleapis.com, Enabled (18/23)
API: reseller.googleapis.com, Enabled (19/23)
API: sheets.googleapis.com, Enabled (20/23)
API: siteverification.googleapis.com, Enabled (21/23)
API: storage-api.googleapis.com, Enabled (22/23)
API: vault.googleapis.com, Enabled (23/23)
Setting GAM project consent screen...
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Enabled
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Generating new private key
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Extracting public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Done generating private key and public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Service Account Key: SVCACCTKEY, Uploaded
Service Account OAuth2 File: C:\GAMConfig\oauth2service.json, Service Account Key: SVCACCTKEY, Updated
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Has rights to rotate own private key
Please go to:
https://console.cloud.google.com/apis/credentials/oauthclient?project=gam-project-abc-def-ghi
1. Choose "Desktop App" or "Other" for "Application type".
2. Enter "GAM" or another desired value for "Name".
3. Click the blue "Create" button.
4. Copy your "client ID" value that shows on the next page.
Enter your Client ID: CLIENTID
5. Go back to your browser and copy your "client secret" value.
Enter your Client Secret: CLIENTSECRET
6. Go back to your browser and click OK to close the "OAuth client" popup if it's still open.
That's it! Your GAM Project is created and ready to use.
C:\GAMADV-XTD3>
C:\GAMADV-XTD3>gam config no_browser true save
C:\GAMADV-XTD3>gam create project
WARNING: Config File: C:\GAMConfig\gam.cfg, Item: client_secrets_json, Value: C:\GAMConfig\client_secrets.json, Not Found
WARNING: Config File: C:\GAMConfig\gam.cfg, Item: oauth2service_json, Value: C:\GAMConfig\oauth2service.json, Not Found
Enter your Google Workspace admin or GCP project manager email address authorized to manage project(s) admin@domain.com
Go to the following link in a browser on other computer:
https://accounts.google.com/o/oauth2/v2/auth?redirect_uri=http%3A%2F%2Flocalhost%3A8080%2F&response_type=code&client_id=...
Enter verification code: abc...xyz
Authentication successful.
Creating project "GAM Project"...
Checking project status...
Project: gam-project-abc-def-ghi, Enable 23 APIs
API: admin.googleapis.com, Enabled (1/23)
API: alertcenter.googleapis.com, Enabled (2/23)
API: appsactivity.googleapis.com, Enabled (3/23)
API: audit.googleapis.com, Enabled (4/23)
API: calendar-json.googleapis.com, Enabled (5/23)
API: chat.googleapis.com, Enabled (6/23)
API: classroom.googleapis.com, Enabled (7/23)
API: contacts.googleapis.com, Enabled (8/23)
API: drive.googleapis.com, Enabled (9/23)
API: driveactivity.googleapis.com, Enabled (10/23)
API: gmail.googleapis.com, Enabled (11/23)
API: groupsmigration.googleapis.com, Enabled (12/23)
API: groupssettings.googleapis.com, Enabled (13/23)
API: iam.googleapis.com, Enabled (14/23)
API: iap.googleapis.com, Enabled (15/23)
API: licensing.googleapis.com, Enabled (16/23)
API: people.googleapis.com, Enabled (17/23)
API: pubsub.googleapis.com, Enabled (18/23)
API: reseller.googleapis.com, Enabled (19/23)
API: sheets.googleapis.com, Enabled (20/23)
API: siteverification.googleapis.com, Enabled (21/23)
API: storage-api.googleapis.com, Enabled (22/23)
API: vault.googleapis.com, Enabled (23/23)
Setting GAM project consent screen...
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Enabled
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Generating new private key
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Extracting public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Done generating private key and public certificate
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Service Account Key: SVCACCTKEY, Uploaded
Service Account OAuth2 File: C:\GAMConfig\oauth2service.json, Service Account Key: SVCACCTKEY, Updated
Project: gam-project-abc-def-ghi, Service Account: gam-project-abc-def-ghi@gam-project-abc-def-ghi.iam.gserviceaccount.com, Has rights to rotate own private key
Please go to:
https://console.cloud.google.com/apis/credentials/oauthclient?project=gam-project-abc-def-ghi
1. Choose "Desktop App" or "Other" for "Application type".
2. Enter "GAM" or another desired value for "Name".
3. Click the blue "Create" button.
4. Copy your "client ID" value that shows on the next page.
Enter your Client ID: CLIENTID
5. Go back to your browser and copy your "client secret" value.
Enter your Client Secret: CLIENTSECRET
6. Go back to your browser and click OK to close the "OAuth client" popup if it's still open.
That's it! Your GAM Project is created and ready to use.
C:\GAMADV-XTD3>
You select a list of scopes, GAM uses a browser to get final authorization from Google for these scopes and writes the credentials into the file oauth2.txt.
C:\GAMADV-XTD3>gam oauth create
[*] 0) Calendar API (supports readonly)
[*] 1) Chrome Browser Cloud Management API (supports readonly)
[*] 2) Chrome Management API - AppDetails read only
[*] 3) Chrome Management API - Telemetry read only
[*] 4) Chrome Management API - read only
[*] 5) Chrome Policy API (supports readonly)
[*] 6) Chrome Printer Management API (supports readonly)
[*] 7) Chrome Version History API
[*] 8) Classroom API - Course Announcements (supports readonly)
[*] 9) Classroom API - Course Topics (supports readonly)
[*] 10) Classroom API - Course Work/Materials (supports readonly)
[*] 11) Classroom API - Course Work/Submissions (supports readonly)
[*] 12) Classroom API - Courses (supports readonly)
[*] 13) Classroom API - Profile Emails
[*] 14) Classroom API - Profile Photos
[*] 15) Classroom API - Rosters (supports readonly)
[*] 16) Classroom API - Student Guardians (supports readonly)
[ ] 17) Cloud Channel API (supports readonly)
[*] 18) Cloud Identity - Inbound SSO Settings (supports readonly)
[*] 19) Cloud Identity Groups API (supports readonly)
[*] 20) Cloud Identity OrgUnits API (supports readonly)
[*] 21) Cloud Identity User Invitations API (supports readonly)
[ ] 22) Cloud Storage API (Read Only, Vault/Takeout Download, Cloud Storage)
[ ] 23) Cloud Storage API (Read/Write, Vault/Takeout Copy/Download, Cloud Storage)
[*] 24) Contact Delegation API (supports readonly)
[*] 25) Contacts API - Domain Shared Contacts and GAL
[*] 26) Data Transfer API (supports readonly)
[*] 27) Directory API - Chrome OS Devices (supports readonly)
[*] 28) Directory API - Customers (supports readonly)
[*] 29) Directory API - Domains (supports readonly)
[*] 30) Directory API - Groups (supports readonly)
[*] 31) Directory API - Mobile Devices Directory (supports readonly and action)
[*] 32) Directory API - Organizational Units (supports readonly)
[*] 33) Directory API - Resource Calendars (supports readonly)
[*] 34) Directory API - Roles (supports readonly)
[*] 35) Directory API - User Schemas (supports readonly)
[*] 36) Directory API - User Security
[*] 37) Directory API - Users (supports readonly)
[ ] 38) Email Audit API
[*] 39) Groups Migration API
[*] 40) Groups Settings API
[*] 41) License Manager API
[*] 42) People API (supports readonly)
[*] 43) People Directory API - read only
[ ] 44) Pub / Sub API
[*] 45) Reports API - Audit Reports
[*] 46) Reports API - Usage Reports
[ ] 47) Reseller API
[*] 48) Site Verification API
[ ] 49) Sites API
[*] 50) Vault API (supports readonly)
Select an unselected scope [ ] by entering a number; yields [*]
For scopes that support readonly, enter a number and an 'r' to grant read-only access; yields [R]
For scopes that support action, enter a number and an 'a' to grant action-only access; yields [A]
Clear read-only access [R] or action-only access [A] from a scope by entering a number; yields [*]
Unselect a selected scope [*] by entering a number; yields [ ]
Select all default scopes by entering an 's'; yields [*] for default scopes, [ ] for others
Unselect all scopes by entering a 'u'; yields [ ] for all scopes
Exit without changes/authorization by entering an 'e'
Continue to authorization by entering a 'c'
Note, if all scopes are selected, Google will probably generate an authorization error
Please enter 0-50[a|r] or s|u|e|c: c
Enter your Google Workspace admin email address? admin@domain.com
Go to the following link in a browser on this computer or on another computer:
https://accounts.google.com/o/oauth2/v2/auth?response_type=code&client_id=423565144751-10lsdt2lgnsch9jmdhl35uq4617u1ifp&redirect_uri=http%3A%2F%2F127.0.0.1%3A8080%2F&scope=...
If you use a browser on another computer, you will get a browser error that the site can't be reached AFTER you
click the Allow button, paste "Unable to connect" URL from other computer (only URL data up to &scope required):
Enter verification code or paste "Unable to connect" URL from other computer (only URL data up to &scope required):
The authentication flow has completed.
Client OAuth2 File: C:\GAMConfig\oauth2.txt, Created
C:\GAMADV-XTD3>
C:\GAMADV-XTD3>gam user admin@domain.com check serviceaccount
System time status
Your system time differs from www.googleapis.com by less than 1 second PASS
Service Account Private Key Authentication
Authentication PASS
Service Account Private Key age; Google recommends rotating keys on a routine basis
Service Account Private Key age: 0 days PASS
Domain-wide Delegation authentication:, User: admin@domain.com, Scopes: 34
https://mail.google.com/ PASS (1/34)
https://sites.google.com/feeds PASS (2/34)
https://www.googleapis.com/auth/analytics.readonly PASS (3/34)
https://www.googleapis.com/auth/apps.alerts PASS (4/34)
https://www.googleapis.com/auth/calendar PASS (5/34)
https://www.googleapis.com/auth/chat.delete PASS (6/34)
https://www.googleapis.com/auth/chat.memberships PASS (7/34)
https://www.googleapis.com/auth/chat.messages PASS (8/34)
https://www.googleapis.com/auth/chat.spaces PASS (9/34)
https://www.googleapis.com/auth/classroom.announcements PASS (10/34)
https://www.googleapis.com/auth/classroom.coursework.students PASS (11/34)
https://www.googleapis.com/auth/classroom.courseworkmaterials PASS (12/34)
https://www.googleapis.com/auth/classroom.profile.emails PASS (13/34)
https://www.googleapis.com/auth/classroom.rosters PASS (14/34)
https://www.googleapis.com/auth/classroom.topics PASS (15/34)
https://www.googleapis.com/auth/cloud-identity PASS (16/34)
https://www.googleapis.com/auth/cloud-platform PASS (17/34)
https://www.googleapis.com/auth/contacts PASS (18/34)
https://www.googleapis.com/auth/contacts.other.readonly PASS (19/34)
https://www.googleapis.com/auth/datastudio PASS (20/34)
https://www.googleapis.com/auth/directory.readonly PASS (21/34)
https://www.googleapis.com/auth/documents PASS (22/34)
https://www.googleapis.com/auth/drive PASS (23/34)
https://www.googleapis.com/auth/drive.activity PASS (24/34)
https://www.googleapis.com/auth/drive.admin.labels FAIL (25/34)
https://www.googleapis.com/auth/drive.labels FAIL (26/34)
https://www.googleapis.com/auth/gmail.modify PASS (27/34)
https://www.googleapis.com/auth/gmail.settings.basic PASS (28/34)
https://www.googleapis.com/auth/gmail.settings.sharing PASS (29/34)
https://www.googleapis.com/auth/keep PASS (30/34)
https://www.googleapis.com/auth/spreadsheets PASS (31/34)
https://www.googleapis.com/auth/tasks PASS (32/34)
https://www.googleapis.com/auth/userinfo.profile PASS (33/34)
https://www.googleapis.com/auth/youtube.readonly PASS (34/34)
Some scopes FAILED!
To authorize them, please go to:
https://admin.google.com/ac/owl/domainwide...thuser=admin@domain.com
You will be directed to the Google Workspace admin console Security/API Controls/Domain-wide Delegation page
The "Add a new Client ID" box will open
Make sure that "Overwrite existing client ID" is checked
Click AUTHORIZE
When the box closes you're done
After authorizing it may take some time for this test to pass so wait a few moments and then try this command again.
C:\GAMADV-XTD3>
The link shown in the error message should take you directly to the authorization screen. If not, make sure that you are logged in as a domain admin, then re-enter the link.
Wait a moment and then perform the following command; it it still fails, wait a bit longer, it can sometimes take serveral minutes for the authorization to complete.
C:\GAMADV-XTD3>gam user admin@domain.com check serviceaccount
System time status:
Your system time differs from www.googleapis.com by less than 1 second PASS
Service Account Private Key Authentication:
Authentication PASS
Domain-wide Delegation authentication:, User: admin@domain.com, Scopes: 34
https://mail.google.com/ PASS (1/34)
https://sites.google.com/feeds PASS (2/34)
https://www.googleapis.com/auth/analytics.readonly PASS (3/34)
https://www.googleapis.com/auth/apps.alerts PASS (4/34)
https://www.googleapis.com/auth/calendar PASS (5/34)
https://www.googleapis.com/auth/chat.delete PASS (6/34)
https://www.googleapis.com/auth/chat.memberships PASS (7/34)
https://www.googleapis.com/auth/chat.messages PASS (8/34)
https://www.googleapis.com/auth/chat.spaces PASS (9/34)
https://www.googleapis.com/auth/classroom.announcements PASS (10/34)
https://www.googleapis.com/auth/classroom.coursework.students PASS (11/34)
https://www.googleapis.com/auth/classroom.courseworkmaterials PASS (12/34)
https://www.googleapis.com/auth/classroom.profile.emails PASS (13/34)
https://www.googleapis.com/auth/classroom.rosters PASS (14/34)
https://www.googleapis.com/auth/classroom.topics PASS (15/34)
https://www.googleapis.com/auth/cloud-identity PASS (16/34)
https://www.googleapis.com/auth/cloud-platform PASS (17/34)
https://www.googleapis.com/auth/contacts PASS (18/34)
https://www.googleapis.com/auth/contacts.other.readonly PASS (19/34)
https://www.googleapis.com/auth/datastudio PASS (20/34)
https://www.googleapis.com/auth/directory.readonly PASS (21/34)
https://www.googleapis.com/auth/documents PASS (22/34)
https://www.googleapis.com/auth/drive PASS (23/34)
https://www.googleapis.com/auth/drive.activity PASS (24/34)
https://www.googleapis.com/auth/drive.admin.labels PASS (25/34)
https://www.googleapis.com/auth/drive.labels PASS (26/34)
https://www.googleapis.com/auth/gmail.modify PASS (27/34)
https://www.googleapis.com/auth/gmail.settings.basic PASS (28/34)
https://www.googleapis.com/auth/gmail.settings.sharing PASS (29/34)
https://www.googleapis.com/auth/keep PASS (30/34)
https://www.googleapis.com/auth/spreadsheets PASS (31/34)
https://www.googleapis.com/auth/tasks PASS (32/34)
https://www.googleapis.com/auth/userinfo.profile PASS (33/34)
https://www.googleapis.com/auth/youtube.readonly PASS (34/34)
All scopes PASSED!
Service Account Client name: SVCACCTID is fully authorized.
C:\GAMADV-XTD3>
-
customer_id
- Having this data keeps Gam from having to make extra API calls -
domain
- This allows you to omit the domain portion of email addresses -
timezone local
- Gam will convert all UTC times to your local timezone
C:\GAMADV-XTD3>gam info domain
Customer ID: C01234567
Primary Domain: domain.com
Customer Creation Time: 2007-06-06T15:47:55.444Z
Primary Domain Verified: True
Default Language: en
...
C:\GAMADV-XTD3>gam config customer_id C01234567 domain domain.com timezone local save verify
Config File: C:\GAMConfig\gam.cfg, Saved
Section: DEFAULT
activity_max_results = 100
...
[long list of all config settings that should match the directories you specified]
...
C:\GAMADV-XTD3>
Need more help? Ask on the GAM Discussion Group
Update History
Installation
- How to Install Advanced GAM
- How to Update Advanced GAM
- How to Upgrade from Standard GAM
- How to Upgrade from GAMADV-X or GAMADV-XTD
- Install GAM as Python Library
- GAMADV-XTD3 on Chrome OS Devices
- GAMADV-XTD3 on Android Devices
- Google Network Addresses
- HTTPS Proxy
- SSL Root CA Certificates
- How to Uninstall Advanced GAM
Configuration
- Authorization
- GAM Configuration
- Running GAMADV-XTD3 securely on a Google Compute Engine
- Using GAMADV-XTD3 with a delegated admin service account
- Using GAMADV-XTD3 with a YubiKey
Notes and Information
- Upgrade Benefits
- Questions? Visit the GAM Discussion Forum
- Scripts
- Other Resources
- Drive REST API v3
- BNF Syntax
- GAM Return Codes
- Python Regular Expressions
- Rclone
Definitions
Command Processing
- Bulk Processing
- Command Line Parsing
- Command Logging and Progress
- Command data from Google Docs/Sheets/Storage
- CSV Special Characters
- CSV Input Filtering
- CSV Output Filtering
- Meta Commands and File Redirection
- Permission matches
- Tag Replace
- Todrive
Collections
Client Access
- Addresses
- Administrators
- Alert Center
- Aliases
- Calendars
- Calendars - Access
- Calendars - Events
- Chrome Auto Update Expiration Counts
- Chrome Browser Cloud Management
- Chrome Device Needs Attention Counts
- Chrome Installed Apps
- Chrome Policies
- Chrome Printers
- Chrome Version Counts
- Chrome Version History
- ChromeOS Devices
- Classroom - Courses
- Classroom - Guardians
- Classroom - Invitations
- Classroom - Membership
- Cloud Channel
- Cloud Identity Devices
- Cloud Identity Groups
- Cloud Identity Groups - Membership
- Cloud Storage
- Context Aware Access Levels
- Customer
- Domains
- Domains - Verification
- Domain People - Contacts & Profiles
- Domain Shared Contacts - Global Address List
- Email Audit Monitor
- Find File Owner
- Google Data Transfers
- Groups
- Groups - Membership
- Inbound SSO
- Licenses
- Mobile Devices
- Organizational Units
- Reports
- Reseller
- Resources
- Send Email
- Schemas
- Shared Drives
- Sites
- Users
- Unmanaged Accounts
- Users - Signout and Turn off 2-Step Verification
- Vault - Takeout
- Version and Help
Special Service Account Access
Service Account Access
- Users - Analytics Admin
- Users - Application Specific Passwords
- Users - Backup Verification Codes
- Users - Calendars
- Users - Calendars - Access
- Users - Calendars - Events
- Users - Chat
- Users - Classroom - Profile
- Users - Deprovision
- Users - Contacts
- Users - Contacts - Delegates
- Users - Drive - File Selection
- Users - Drive - Activity/Settings
- Users - Drive - Cleanup
- Users - Drive - Comments
- Users - Drive - Copy/Move
- Users - Drive - Files-Display
- Users - Drive - Files-Manage
- Users - Drive - Labels
- Users - Drive - Orphans
- Users - Drive - Ownership
- Users - Drive - Permissions
- Users - Drive - Query
- Users - Drive - Revisions
- Users - Drive - Shortcuts
- Users - Drive - Transfer
- Users - Forms
- Users - Gmail - Client Side Encryption
- Users - Gmail - Delegates
- Users - Gmail - Filters
- Users - Gmail - Forwarding
- Users - Gmail - Labels
- Users - Gmail - Messages/Threads
- Users - Gmail - Profile
- Users - Gmail - S/MIME
- Users - Gmail - SendAs/Signature/Vacation
- Users - Gmail - Settings
- Users - Group Membership
- Users - Keep
- Users - Looker Studio
- Users - People - Contacts & Profiles
- Users - Photo
- Users - Profile Sharing
- Users - Shared Drives
- Users - Spreadsheets
- Users - Tasks
- Users - Tokens
- Users - YouTube