Page Index - openaps/openomni GitHub Wiki

203 page(s) in this GitHub Wiki:

• Home
• Openomni Wiki
• PDM/Pod Communication Decode
• Communications
• Implementations
• 0 3U Temp Basal OmniKit
• 0 5U temp basal PDM vs Omnikit
• 0 5U Temp Basal recording OmniKit
• 0.05 Insulin not delivered with deactivation (Lytrix)
• 0xd5 and 0x05 Command
• 1.55U h 0.5h segment and 1.50U h segment, moving from the first to the last half hour (Lytrix)
• 1.55U h 1.0h segment and 1.50U h segment, moving from the first to the last half hour (Lytrix)
• 2.25U temp basal every 1 minute for 30 minutes OmniKit
• 34 Fault event at 2h segment 2 temp basal
• 62 Fault after repetitive get status after 1 day 19 hours
• 67 Error temp basals
• 67 Fault event after 2h in segment 2 temp basal started too soon
• 6A 67 34 Fault Events analisis
• 6a fault event 1 h segment 1 less then 100 seconds temp basal start
• 6A Fault event 1h segment 2 temp basal overlaps segment
• 6A Fault event at 2h segment 2
• 6A Fault event at 3 hour segment 1
• 6A Fault event before PPPP and XXXXXXXX ZZZZZZZZ fixes
• 6a fault xcode logs temp basals
• Alarms off: Temp basal set for .9U hr for .5 hour (Includes command to cancel) (Heltzel)
• All 0x19 commands
• All advisory and hazardous alarms
• All Beep Types
• All bolus commands from 0.05 1.65 (Lytrix)
• All Immediate Bolus Commands
• All Pairing steps
• All Temp basal units for 0.5h
• All Temp basal units for 0.5h PDM vs OmniKit
• Alternate installation instructions for using RFcat
• Auto off (1H) (Lytrix)
• B9 A bit set unset examples basal schedule
• B9 CCCC counter
• Basal captures 4 to 23 entries (AJsCGM)
• Basal Schedule captures
• Basal tests after fixes OK
• Beeps change POD (Lytrix)
• Beeps due to faulted POD auto deactivate (jweismann)
• Bolus
• Bolus 0,50 units with temp basal 1,10 (Lytrix)
• Bolus 4,0 U with Temp Basal 2,0 running (Lytrix)
• Bolus and Cancel Bolus packets
• Bolus Commands (Wedding)
• Bolus extended with superimposed immediate bolus (csholmq)
• Bolus larger amounts (Lytrix)
• Bolus with active extended bolus (Lytrix)
• Bolus with cancel (csholmq)
• Bolus with extended delivery (Lytrix)
• Bolus with only extended delivery (Lytrix)
• Cancel Bolus with Temp Basal active (Lytrix)
• Cancel Temp Basal (Lytrix)
• Capture missing ACK after status response Pod
• Change and activate new pod 2 (yeagerm)
• Change and activate new Pod packets (yeagerm)
• Change Pod now packets
• Change Time (Heltzel)
• Check alarms (Lytrix)
• Check PPPP values for 3.0U h 24 hour
• Command 01 Version Response
• Command 02 Pod Information Response
• Command 03 Setup Pod
• Command 06 Error Response
• Command 07 Assign ID
• Command 08 Configure Delivery Flags
• Command 0E Status Request
• Command 11 Acknowledge Alerts
• Command 13 Extra Basal
• Command 16 Temp Basal
• Command 17 Bolus extra
• Command 19 Configure Alerts
• Command 1A Insulin Schedule
• Command 1A Table 0
• Command 1A Table 1
• Command 1A Table 2
• Command 1C Deactivate Pod
• Command 1D Status response
• Command 1E Beep Configure
• Command 1F Cancel Request
• Confirm
• Confirmation reminder on off (Lytrix)
• Deactivate POD after running out of Insulin (Lytrix)
• Deactivate POD Normally (Lytrix)
• Deactivate Pod Normally 46U left(Lytrix)
• Differences between PDM and RL with 24 entries basal schedule (Lytrix)
• Differences between PDM and RL with multiple entries (AJsCGM and Lytrix)
• Enable Different Preset Basal (Lytrix)
• Enable Different Preset Basal packets
• Evaluating 6a Failure with long status response error
• Extended Bolus examples (Lytrix)
• Failure packets: Pod covered with aluminum foil. Activate PDM. "Pod status not available"
• Fault event codes
• FlashLogs Words 0x50 from deactivation (Lytrix)
• Flatline Beeeeeep POD (Lytrix)
• Flatline triggered by Auto off 1 hour (Lytrix)
• Full life of a pod (omni flo)
• How to add a new packet Page
• Initial priming bolus difference in first or second half hour
• Insulin Delivery Error during priming
• maxEncoding schedule PDM vs Loop Matches
• Message Body Checksum
• Message sequences
• Message Structure
• Message Types
• Missing ACK after status response
• Nonce
• Nonce Reset
• Nonce sequence L43111 T160308
• Nonce sequence L43111 T190246
• Occlusion Alarm packets (yeagerm)
• Occlusion alarm packets 2 (yeagerm)
• Occlusion alarm packets 3 (yeagerm)
• Occlusion During Insulin Delivery (Heltzel)
• Packet Captures
• Pairing
• Pairing (ajs)
• Pairing 02
• Pairing 03
• Pairing 4
• Pairing 5
• Pairing Temp Basal 2x bolus (Lytrix)
• PDM Message Sequence Testing
• PDM Ref Codes
• PDM status response Testing
• Percent Temp Basal Packets (Heltzel)
• Pod Lot and TID numbers
• Pod Progress State
• Pod setup with known Lot and TID
• POD status messages containing Lot and TID
• Pod Status Request (Wedding)
• Pod Teardown
• Priming and Deploying New Pod (jweismann)
• Priming and Deploying New Pod (Lytrix)
• Priming and Deploying New Pod (Wedding)
• Priming and fill cannula examples
• Priming, captured from pod expired to new insertion ok (Ajs)
• Program reminder on off (Lytrix)
• Protocol
• Pulse Log Entry
• Pulse timings of setting Basal schedules to solve Phase (Lytrix)
• Raw capture pairing with RFcat (Lytrix)
• raw json file 1
• raw json file 2
• raw json file 3
• raw json file empty pod
• repeating get status command Loop
• Repetitive get Status Testing on Loop
• Repetitive multiple TempBasals and Bolus actions (Lytrix)
• Reservoir almost empty (50U) (Heltzel)
• Reset sequence cases
• Resume insulin delivery packets
• RF Modulation
• rtlomni 2.25U temp basal every 1 minute capture
• SC9S08ER
• Set Basal Examples (AJsCGM)
• Set Basal Examples (Heltzel)
• Set Basal Examples (Lytrix)
• Set Basal Examples (yeagerm)
• Set Basal schedule with 24 time slots (Lytrix)
• Set Low Reservoir Alert (Lytrix)
• Set Pod Expiration Alert (Lytrix)
• Shutdown screaming pod (ps2)
• Simultaneous alerts (Heltzel)
• Status Packets
• Status packets 33U left in reservoir
• Status packets 40U in reservoir
• Status Packets Home Status (Lytrix)
• Status packets Reservoir level 40U
• Status Response 1D long run (Lytrix)
• Status Response Expired Pod with >50U running on rileylink (Lytrix)
• Status Response with bit for event 0x14 (omni flo)
• Status updates while Bolusing (Lytrix)
• Suspend delivery for time change, resume delivery (danevans dexdan)
• Suspend insulin and continue after 10 seconds (Lytrix)
• Suspend insulin delivery packets
• Suspend insulin for full 0.5 Hour then resume basal (Lytrix)
• Suspend Resume Capture 0.5h (Lytrix)
• Suspend Resume Capture all 0.5 2hrs (Lytrix)
• Suspend Resume Captures (ps2)
• Temp basal (pc) with suspend cancel (csholmq)
• Temp basal 0.05 1.0 per hour (Lytrix)
• Temp Basal 0.05 8.5hours (Lytrix)
• Temp basal 1.10U h 1 hour (Lytrix) bolus 1 U
• Temp basal 1U with cancel (csholmq)
• Temp basal 2.05 0.5H (Lytrix)
• Temp Basal 2U 2H (Lytrix)
• Temp Basal 30U 0.5H (Lytrix)
• Temp Basal 30U with cancel (csholmq)
• Temp Basal Examples Longer Than 0.5h
• Temp Basal Max setting 30U H 12 hours (Lytrix)
• Temp Basal Off unit for 0,5H (Lytrix)
• Temp Basal Packets
• Temp Basal Packets 02
• Temp Basal Packets 03 (Lytrix)
• Temp Basal Packets 04 (Lytrix)
• Temp basal with new 0x16 (Lytrix)
• Temp basal with suspend cancel (csholmq)
• Warning if no POD status is available within X hour (Lytrix)
• xcodelog 2.25U temp basal every 1 minute capture
• XXXXXXXX Basal schedule rounding difference PDM Loop