Packet Captures - openaps/openomni GitHub Wiki

Packet captures

First time adding a package? Read this how to contribute: How-to-add-a-new-packet-Page.

Full life of a pod (omni-flo)

Occlusion Alarm packets (yeagerm)

Occlusion alarm packets 2 (yeagerm)

Occlusion alarm packets 3 (yeagerm)

0x1D Status request/response

• Status Packets
• Confirm
• Pod Status Request (Wedding)
• Status packets 40U in reservoir
• Status packets 33U left in reservoir
• Status Response 1D long run (Lytrix)
• Status Response with bit for event 0x14 (omni-flo)
• Status Response Expired Pod with >50U running on rileylink (Lytrix)

07 Assign ID / 03 Setup Pod

• All Pairing steps
• Pairing
• Pairing-02
• Pairing-03
• Pod-setup-with-known-Lot-and-TID
• Priming and Deploying New Pod (Wedding)
• Priming and Deploying New Pod (Lytrix)
• Priming and Deploying New Pod (jweismann)
• Raw capture pairing with RFcat (Lytrix)
• Pairing (ajs)

0x1A Insulin Schedule

Basal schedules

• Basal-Schedule-captures
• Set Basal schedule with 24 time slots (Lytrix)
• Differences between PDM and RL with multiple entries (AJsCGM and Lytrix)
• Differences between PDM and RL with 24 entries basal schedule (Lytrix)
• Pulse timings of setting Basal schedules to solve Phase (Lytrix)
• Enable Different Preset Basal packets
• Enable Different Preset Basal (Lytrix)
• Set Basal Examples (Lytrix)
• Set Basal Examples (Heltzel)
• Change Basal real world and weird setup (AJsCGM)
• Set Basal Examples (yeagerm)
• Basal captures 4 to 23 entries (AJsCGM)
• 1.55U/h 0.5h segment and 1.50U/h segment, moving from the first to the last half hour (Lytrix)
• 1.55U/h 1.0h segment and 1.50U/h segment, moving from the first to the last half hour (Lytrix)

Temp Basal

• All Temp basal units for 0.5h

• All Temp basal units for 0.5h PDM vs OmniKit

• Alarms off: Temp basal set for .9U/hr for .5 hour (Includes command to cancel) (Heltzel)

• Change Time (Heltzel)

• Temp Basal Packets

• Temp Basal Packets 02

• Temp Basal Packets 03 (Lytrix)

• Temp Basal Packets 04 (Lytrix)

• Temp-basal-1.10U-h-1-hour-(Lytrix)---bolus-1-U

• Percent Temp Basal Packets (Heltzel)

• Temp-Basal-Max-setting-30U-H-12-hours-(Lytrix)

• Temp Basal 2U 2H (Lytrix)

• Temp Basal 30U 0.5H (Lytrix)

• Temp Basal Off unit for 0,5H (Lytrix)

• Temp Basal 30U with cancel (csholmq)

• Temp basal with suspend/cancel (csholmq)

• Temp basal (pc) with suspend/cancel (csholmq)

• Temp basal 1U with cancel (csholmq)

• Temp basal 0.05 1.0 per hour (Lytrix)

• Temp basal 2.05 0.5H (Lytrix)

• Temp Basal 0.05 8.5hours (Lytrix)

Bolus

• All Immediate Bolus Commands

• All bolus commands from 0.05-1.65 (Lytrix)

• Bolus packets

• Bolus larger amounts (Lytrix)

• Bolus 0,50 units with temp basal 1,10 (Lytrix)

• Bolus 4,0 U with Temp Basal 2,0 running (Lytrix)

• Bolus and Cancel Bolus packets

• Bolus Commands (Wedding)

• Status updates while Bolusing (Lytrix)

• Bolus with cancel (csholmq)

Extended Bolus

• Extended Bolus examples (Lytrix)
• Bolus extended with superimposed immediate bolus (csholmq)
• Bolus with extended delivery (Lytrix)
• Bolus with active extended bolus (Lytrix)

Type 0x6a errors

• Evaluating 6a Failure with long status response error
• PDM-Message-Sequence-Testing
• PDM-status-response-Testing
• Repetitive get Status Testing on Loop
• 62 Fault after repetitive get status after 1 day 19 hours
• B9 A-bit set/unset examples basal schedule

Type 0x93 error tests

• Pairing Temp Basal + 2x bolus (Lytrix)
• Repetitive multiple TempBasals and Bolus actions (Lytrix)

0x1F Cancel Request

• Suspend-delivery-for-time-change,-resume-delivery-(danevans-dexdan)
• Cancel Bolus with Temp Basal active (Lytrix)
• Cancel Temp Basal (Lytrix)
• Suspend insulin delivery packets
• Suspend insulin for full 0.5 Hour then resume basal (Lytrix)
• Suspend insulin and continue after 10 seconds (Lytrix)
• Suspend Resume Capture 0.5h (Lytrix)
• Suspend Resume Capture all 0.5-2hrs (Lytrix)
• Suspend Resume Captures (ps2)
• Resume insulin delivery packets

0x1C Change/Deactivate POD

• Change Pod now packets
• Change and activate new Pod packets (yeagerm)
• Change and activate new pod 2 (yeagerm)
• Deactivate-POD-Normally-(Lytrix)
• Deactivate-Pod-Normally-46U-left(Lytrix)
• Deactivate-POD-after-running-out-of-Insulin-(Lytrix)
• Beeps change POD (Lytrix)
• Beeps due to faulted POD + auto deactivate (jweismann)
• Flatline-Beeeeeep-POD-(Lytrix)
• Shutdown-screaming-pod-(ps2)
• Flatline triggered by Auto-off 1 hour (Lytrix)

POD beep statuses with different ending setups

• End date (using 1 hour before end) (Lytrix)
• Reservoir almost empty (50U) (Heltzel)
• Auto off (1H) (Lytrix)
• All possible Pod Beeps recordings (Lytrix)

Settings

• Program reminder on/off (Lytrix)
• Warning if no POD status is available within X hour (Lytrix)
• Check alarms (Lytrix)
• Change Time (Heltzel)
• Set Low Reservoir Alert (Lytrix)
• Set Pod Expiration Alert (Lytrix)
• Confirmation reminder on/off (Lytrix)

0x19 Configure Alerts

• All-0x19-commands
• Set Low Reservoir Alert (Lytrix)
• Set Pod Expiration Alert (Lytrix)
• All advisory and hazardous alarms
• Simultaneous alerts (Heltzel)

02 Pod information response

• Failure packets: Pod covered with aluminum foil. Activate PDM. "Pod status not available"
• Insulin-Delivery-Error-during-priming
• Occlusion During Insulin Delivery (Heltzel)
• FlashLogs Words 0x50 from deactivation (Lytrix)
• 0.05 Insulin not delivered with deactivation (Lytrix)