FSXCLAMP - firepick1/FireSlide GitHub Wiki

FireSlide™ PCB Clamp

Function

Pair of 3DP clamps hold PCB board securely to 20x80 or 20x40 slider extrusion with M5 screws. An M2 screw can be used as a PCB stop for quick setup. Ruler scoring is provided every 10mm for rough measurement. Beveled face locks down common PCB thicknesses to extrusion. Clamp has a low profile that helps provides unrestricted PnP head travel. Clamp self-aligns to extrusion so that PCB is parallel to extrusion. Clamp requires PCB with two parallel faces.

Requires

  • M5x10mm screw (2)
  • M5 extrusion nut (2)
  • OPTIONAL: M2x12mm socket head screw for PCB stop (1)
  • OPTIONAL: M2 nut for PCB stop (1)
  • RECOMMENDED: M5 Knob

See Also