Sleepers - Niilo007/Stationeers-Research GitHub Wiki

Kit (Sleeper)

This kit produces a range of sleepers which will keep players hydrated and fed while logged out - as long as a breathable atmosphere is provided.

Kit (Sleeper)
____________ General ____________ ____________ ____________
Paintable ✔
Prefab Hash 326752036
Prefab Name ItemKitSleeper
______________ Item ______________ ____________ ____________
Stack Size 5
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
Made In Hydraulic Pipe Bender T1 Hydraulic Pipe Bender T2
alt text alt text
Time
Energy 500
Gold Au 10g 10g
Copper Cu 10g 10g
Steel 25g 25g

Structure (Sleeper Left)

A horizontal variant of the sleeper. Will keep players hydrated and fed while they are logged out - as long as a breathable atmosphere is provided.

  • Sleepers can sustain any living entity inside them, as long as they are powered and provided with a breathable atmosphere.
  • Suits and helmets are too bulky to fit, and must be removed in order to enter the sleeper.
Sleeper Left
____________ General ____________ ______________ ______________
Paintable ✔
Prefab Hash 1213495833
Prefab Name StructureSleeperLeft
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sleeper) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Internal ____________ ____________ ______________
Volume 800 l
Max Pressure
Convection 3.28
Radiation 3.28
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 10W 260W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 3
Rotation Horizontal Only Height 2
Required Support Frame Width 4
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔ Airtight glass canopy state
Mode bool 0 2 ✔ ⭕
Error bool 0 1 ✔ ❌
Activate bool 0 0 ✔ ✔ ???
Lock bool 0 1 ✔ ✔
Setting int 0 100 ✔ ✔
Maximum int 100 100 ✔ ❌
Ratio float 0 1 ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower int 0 ✔ ❌
PrefabHash int 1213495833 1213495833 ✔ ❌
ReferenceId int ✔ ❌
Mode
0 Safe
1 Unsafe
2 Unpowered
Slot Name Class Icon
0 Player Entity
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0
OccupantHash int ✔ ❌ 0
Quantity 0 ✔ ❌ 0
Damage float 0 1 ✔ ❌ 0
Class ? int 0 34 ✔ ❌ 0
MaxQuantity 0 1 ✔ ❌ 0
PrefabHash int ✔ ❌ 0
SortingClass ? int 0 7 ✔ ❌ 0
Connections
Data 0
Pipe Input 1
Power 2

Structure (Sleeper Right)

A horizontal variant of the sleeper. Will keep players hydrated and fed while they are logged out - as long as a breathable atmosphere is provided.

  • Sleepers can sustain any living entity inside them, as long as they are powered and provided with a breathable atmosphere.
  • Suits and helmets are too bulky to fit, and must be removed in order to enter the sleeper.
Sleeper Right
____________ General ____________ ______________ ______________
Paintable ✔
Prefab Hash -1812330717
Prefab Name StructureSleeperRight
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sleeper) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Internal ____________ ____________ ______________
Volume 800 l
Max Pressure
Convection 1.13
Radiation 1.13
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 10W 260W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 3
Rotation Horizontal Only Height 2
Required Support Frame Width 4
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔ Airtight glass canopy state
Mode bool 0 2 ✔ ⭕
Error bool 0 1 ✔ ❌
Activate bool 0 1 ✔ ✔ ??? Needs to be tested
Lock bool 0 1 ✔ ✔
Setting int 0 100 ✔ ✔
Maximum int 100 100 ✔ ❌
Ratio float 0 1 ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower int 0 ✔ ❌
PrefabHash int -1812330717 -1812330717 ✔ ❌
ReferenceId int ✔ ❌
Mode
0 Safe
1 Unsafe
2 Unpowered
Slot Name Class Icon
0 Player Entity
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0
OccupantHash int ✔ ❌ 0
Quantity 0 ✔ ❌ 0
Damage float 0 1 ✔ ❌ 0
Class ? int 0 34 ✔ ❌ 0
MaxQuantity 0 1 ✔ ❌ 0
PrefabHash int ✔ ❌ 0
SortingClass ? int 0 7 ✔ ❌ 0
Connections
Data 0
Pipe Input 1
Power 2

Structure (Sleeper Vertical)

The vertical variant of the sleeper. Will keep players hydrated and fed while they are logged out - as long as a breathable atmosphere is provided.

  • Sleepers can sustain any living entity inside them, as long as they are powered and provided with a breathable atmosphere.
  • Suits and helmets are too bulky to fit, and must be removed in order to enter the sleeper.
Sleeper Vertical
____________ General ____________ ______________ ______________
Paintable ✔
Prefab Hash -1300059018
Prefab Name StructureSleeperVertical
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sleeper) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Internal ____________ ____________ ______________
Volume 800 l
Max Pressure
Convection 3.16
Radiation 3.16
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 10W 260W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Horizontal Only Height 4
Required Support Frame Width 2
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔ Airtight glass canopy state
Mode bool 0 2 ✔ ⭕
Error bool 0 1 ✔ ❌
Activate bool 0 0 ✔ ✔ ???
Lock bool 0 1 ✔ ✔
Setting int 0 100 ✔ ✔
Maximum int 100 100 ✔ ❌
Ratio float 0 1 ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower int 0 ✔ ❌
PrefabHash int -1300059018 -1300059018 ✔ ❌
ReferenceId int ✔ ❌
Mode
0 Safe
1 Unsafe
2 Unpowered
Slot Name Class Icon
0 Player Entity
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0
OccupantHash int ✔ ❌ 0
Quantity 0 ✔ ❌ 0
Damage float 0 1 ✔ ❌ 0
Class ? int 0 34 ✔ ❌ 0
MaxQuantity 0 1 ✔ ❌ 0
PrefabHash int ✔ ❌ 0
SortingClass ? int 0 7 ✔ ❌ 0
Connections
Data 0
Pipe Input 1
Power 2

Structure (Droid Sleeper Vertical)

The Droid Sleeper will recharge robot batteries and equiped suit batteries if present. This sleeper variant is only safe for robots. Entering as a non robot character will cause you to take damage.

  • The droid sleeper will keep a H.E.M Droid charged.
  • Living entities should not attempt to enter, as they will get shocked and burned by the charging prongs.
Droid Sleeper Vertical
____________ General ____________ ______________ ______________
Paintable ✔
Prefab Hash 1382098999
Prefab Name StructureSleeperVerticalDroid
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Sleeper) 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
Upgrade Tool Welding Torch
Upgrade Cost Steel Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
Upgrade Cost Cable Coil 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 10W 410W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 2
Rotation Horizontal Only Height 5
Required Support None Width 2
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔ Gate state
Error bool 0 1 ✔ ❌
Activate bool 0 0 ✔ ✔ ???
Lock bool 0 1 ✔ ✔
On bool 0 1 ✔ ✔
RequiredPower int -1 ✔ ❌
PrefabHash int 1382098999 1382098999 ✔ ❌
ReferenceId int ✔ ❌
Slot Name Class Icon
0 Player Entity
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0
OccupantHash int ✔ ❌ 0
Quantity 0 ✔ ❌ 0
Damage float 0 1 ✔ ❌ 0
Class ? int 0 34 ✔ ❌ 0
MaxQuantity 0 1 ✔ ❌ 0
PrefabHash int ✔ ❌ 0
SortingClass ? int 0 7 ✔ ❌ 0
Connections
Data 0
Power 1

Kit (Cryo Tube)

This kit produces a range of cryo tubes which can be used to heal players and player organs as well as revive dead players.

Kit (Cryo Tube)
____________ General ____________ ____________ ____________
Paintable ✔
Prefab Hash -545234195
Prefab Name ItemKitCryoTube
______________ Item ______________ ____________ ____________
Stack Size 1
Class None 0
SortingClass Kits 1
____________ Durability ____________ ____________ ____________
Flashpoint Temperature 100℃
Autoignition Temperature 300℃
Made In Hydraulic Pipe Bender T2
alt text
Time
Energy 500
Gold Au 10g
Copper Cu 10g
Steel 35g
Silver Ag 5g

Structure (Cryo Tube Horizontal)

The horizontal variant of the cryo tube. Will heal players and organs as well as revive dead players when provided with an atmosphere of Nitrogen below -150C.

  • Cryo Tubes are used to heal biological entities.
    • They must be supplied with a breathable and livable atmosphere for this to work.
  • Cryo Tubes can also resurrect dead entities.
    • TBA
  • Suits and helmets are too bulky to fit, and must be removed in order to enter the Cryo Tube.
Cryo Tube Horizontal
____________ General ____________ ______________ ______________
Paintable ✔
Prefab Hash 1443059329
Prefab Name StructureCryoTubeHorizontal
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Cryo Tube) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Internal ____________ ____________ ______________
Volume 800 l
Max Pressure
Convection 0.067
Radiation 0.067
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 10W 260W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 3
Rotation Horizontal Only Height 3
Required Support None Width 4
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔ Airtight glass canopy state
Error bool 0 1 ✔ ❌
Pressure float 0 ✔ ❌
Temperature float 0 ✔ ❌
Activate bool 0 1 ✔ ✔ ???
Lock bool 0 1 ✔ ✔
Setting int 0 100 ✔ ✔
Maximum int 100 100 ✔ ❌
Ratio float 0 1 ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower int -1 ✔ ❌
PrefabHash int 1443059329 1443059329 ✔ ❌
ReferenceId int ✔ ❌
Slot Name Class Icon
0 Player Entity
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0
OccupantHash int ✔ ❌ 0
Quantity 0 ✔ ❌ 0
Damage float 0 1 ✔ ❌ 0
Class ? int 0 34 ✔ ❌ 0
MaxQuantity 0 1 ✔ ❌ 0
PrefabHash int ✔ ❌ 0
SortingClass ? int 0 7 ✔ ❌ 0
Connections
Data 0
Pipe Input 1
Power 2

Structure (Cryo Tube Vertical)

The vertical variant of the cryo tube. Will heal players and organs as well as revive dead players when provided with an atmosphere of Nitrogen below -150C.

  • Cryo Tubes are used to heal biological entities.
    • They must be supplied with a breathable and livable atmosphere for this to work.
  • Cryo Tubes can also resurrect dead entities.
    • TBA
  • Suits and helmets are too bulky to fit, and must be removed in order to enter the Cryo Tube.
Cryo Tube Vertical
____________ General ____________ ______________ ______________
Paintable ✔
Prefab Hash -1381321828
Prefab Name StructureCryoTubeVertical
____________ Durability ____________ ______________ ______________
Flashpoint Temperature NA
Autoignition Temperature NA
_________ Construction _________ ______________ ______________
Placement Cost Kit (Cryo Tube) 1
............................................................. ......................... .........................
Deconstruction Tool Wrench
Upgrade Tool Welding Torch
Upgrade Cost Plastic Sheets 2
............................................................. ......................... .........................
Deconstruction Tool Angle Grinder
Upgrade Tool Screwdriver
Upgrade Cost Glass Sheets 1
............................................................. ......................... .........................
Deconstruction Tool Hand Drill
____________ Internal ____________ ____________ ______________
Volume 800 l
Max Pressure
Convection 0.06
Radiation 0.06
____________ Power ____________ ____ Min ____ ____ Max ____
Power Use 10W 260W
Heat Generation
Placement Dimensions
Snapping Small Grid Length 3
Rotation Horizontal Only Height 4
Required Support None Width 2
Device Logic Variables Type Min Max Read Write Device Specific Behaviours
Power bool 0 1 ✔ ❌
Open bool 0 1 ✔ ✔ Airtight glass canopy state
Error bool 0 1 ✔ ❌
Pressure float 0 ✔ ❌
Temperature float 0 ✔ ❌
Activate bool 0 1 ✔ ✔ ???
Lock bool 0 1 ✔ ✔
Setting int 0 100 ✔ ✔
Maximum int 100 100 ✔ ❌
Ratio float 0 1 ✔ ❌
On bool 0 1 ✔ ✔
RequiredPower int -1 ✔ ❌
PrefabHash int -1381321828 -1381321828 ✔ ❌
ReferenceId int ✔ ❌
Slot Name Class Icon
0 Player Entity
Logic Slots Type Min Max Read Write Slots Device Specific Behaviours
Occupied bool 0 1 ✔ ❌ 0
OccupantHash int ✔ ❌ 0
Quantity 0 ✔ ❌ 0
Damage float 0 1 ✔ ❌ 0
Class ? int 0 34 ✔ ❌ 0
MaxQuantity 0 1 ✔ ❌ 0
PrefabHash int ✔ ❌ 0
SortingClass ? int 0 7 ✔ ❌ 0
Connections
Data 0
Pipe Input 1
Power 2
⚠️ **GitHub.com Fallback** ⚠️