Antenna Genius Status Messages - 4o3a/genius-api-docs GitHub Wiki

ANTENNA

A status message indicating antenna configuration has been changed, which is received by the clients subscribed to antenna changes: sub antenna

S0|antenna reload

After receiving such a message, the client must reload the antenna configuration using the antenna list command.

OUTPUT

A status message indicating output(s) configuration has been changed, which is received by the clients subscribed to output changes: sub output

S0|output reload

After receiving such a message, the client must reload the output(s) configuration using the group list and output list commands.

PORT

A status message indicating radio port status has been changed, which is received by the clients subscribed to port changes: sub port

S0|port 1 auto=1 source=AUTO band=0 rxant=0 txant=0 inband=0 tx=0 inhibit=0
S0|port 2 auto=1 source=AUTO band=0 rxant=0 txant=0 inband=0 tx=0 inhibit=0

The format of the message is the same as when parsing the port get command.

RELAY

A status message indicating the output(s) or relay(s) state has been changed, which is received by the clients subscribed to relay changes: sub relay

S0|relay tx=00 rx=00 state=00

Parameter	Value
tx	Reserved for future use
rx	Hex representation of selected output(s)
state	Hex representation of active relay(s)