Antenna Genius TCPIP group - 4o3a/genius-api-docs GitHub Wiki

LIST

This command is used to list the available output groups.

C<seq_number>|group list

Example:

C56|group list

The command will return the list of configured output groups in multiple responses with the same <seq_number>, containing a message with group information prior to returning the OK status.

See Response Format for details on the format of the response messages from the device

Response Example:

R56|0|group 1 in_use=1 name=Group_1 mode=ANT antenna=1 allow_none=1
R56|0|group 2 in_use=1 name=Group_2 mode=BAND bands=0004 allow_none=1
R56|0|

Parameter	Value
id	Group identifier
in_use	Is the group in use
name	User-defined name
mode	Group mode / ANT or BAND
antenna	Group active when antenna port selected
bands	Bands mask (hex) - the group is active when any of the masked band is active
allow_none	Allow no active output inside the group

SET

Configures output group

C<seq_number>|group set <group_id> in_use=<in_use> name=<name> mode=<ANT|BAND> [antenna=<antenna>|bands=<bands>] allow_none=<allow_none>

<group_id>    = Group identifier
<in_use>      = Group is in use
<name>        = User-defined group name
<mode>        = Group mode / ANT or BAND
<antenna>     = Antenna selection (ANT mode)
<bands>       = Band(s) selection (BAND mode)
<allow_none>  = Allow no active output selected in the group