Antenna Genius TCPIP output - 4o3a/genius-api-docs GitHub Wiki
This command is used to list the available outputs.
C<seq_number>|output list
Example:
C1|output list
The command will return the list of configured outputs in multiple responses with the same <seq_number>, containing a message with output configuration prior to returning the OK status.
See Response Format for details on the format of the response messages from the device
Response Example:
R1|0|output 1 in_use=1 group=1 name=Output_1 state=01 hotkey=0 trx=0
R1|0|output 2 in_use=1 group=1 name=Output_2 state=08 hotkey=0 trx=0
R1|0|output 3 in_use=1 group=1 name=Output_3 state=40 hotkey=0 trx=0
R1|0|
| Parameter | Value |
|---|---|
| id | Group identifier |
| in_use | Is the output in use |
| group | Output parent identifier |
| name | User-defined name |
| state | Relay state when output is active (hex) |
| hotkey | Global keyboard combination (for Windows Utility) |
| trx | Output toggles (turns off) other output(s) in the same group |
Configures outputs
C<seq_number>|output set <output_id> [(active=<0|1>)|(in_use=<in_use> group=<group_id> name=<name> state=<state> hotkey=<hotkey> trx=<trx>)]
<output_id> = Output identifier
<active> = Activated/deactivates output
<in_use> = Group is in use
<group_id> = Parent group identifier
<name> = User-defined group name
<state> = Relay state when output is active (hex)
<hotkey> = Global keyboard combination (for Windows Utility)
<trx> = Output toggles (turns off) other output(s) in the same group
Example:
C17|output set 1 in_use=1 group=1 name=Output_1 mask=01 state=01 hotkey=0 trx=0
C18|output set 1 active=1
See Response Format for details on the format of the response messages from the device
Response Example:
R17|0|
R18|0|
Initializes output configuration - mandatory before configuring group(s) and output(s).
C<seq_number>|output init
Example:
C67|output init
See Response Format for details on the format of the response messages from the device
Response Example:
R67|0|
