Antenna Genius TCPIP sub - 4o3a/genius-api-docs GitHub Wiki
This command will subscribe to messages produced by the device to inform a client of the status of certain objects. Once a subscription has been enabled, status messages will be sent to the client for changes in the object that is the target of the subscription.
Available objects are:
In the event that a subscription request is made for an object that does not exist, the following response will be generated:
To unsubscribe from an object, use the unsub command. This will revert the previous subscription command and discontinue status messages about the object.
Subscribe to the status of radio ports (A=1, B=2, or both)
C<seq_number>|sub port <port_number|all>
<port_number|all> = port number (A=1, B=2) or all to subscribe to all ports available on the device
Example:
C21|sub port all
See Response Format for details on the format of the response messages from the radio
Response Example:
R21|0|
After a successful subscription to an available port, API will start sending asynchronous updates of port changes via port Status message
Subscribe to the output relay board and output(s) changes
C<seq_number>|sub relay
Example:
C21|sub relay
See Response Format for details on the format of the response messages from the radio
Response Example:
R21|0|
After a successful subscription to an output relay, API will start sending asynchronous updates of relay changes changes via relay Status message
