LD Tools
This application examines the input TBC file and determines the available VBI data for each available frame. The VBI data is stored as both the raw data value for the 3 VBI lines as well as a full decode of the VBI according to the IEC specifications. The resulting information is written back into the JSON metadata file for the TBC output.
For NTSC sources this application also processes items from the IEC NTSC specification that are specific to NTSC LaserDiscs such as 40-bit FM codes, white flags, etc.
Syntax:
ld-process-vbi <options> <input TBC file name>
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
--input-json <filename> Specify the input JSON file (default input.json)
--output-json <filename> Specify the output JSON file (default same as
input)
-n, --nobackup Do not create a backup of the input JSON metadata
-t, --threads <number> Specify the number of concurrent threads (default
is the number of logical CPUs)
Arguments:
input Specify input TBC file
This application reads an ld-decode JSON metadata file, typically as produced by ld-process-vbi, and exports information in standard formats that other tools can read. At present, it can export:
- Per-frame signal quality information from the VITS test signals, as CSV
- Per-frame LaserDisc VBI control signals, as CSV
- LaserDisc navigation information, as FFMETADATA1 (which FFmpeg can use to add chapter navigation to a video file)
Syntax:
ld-export-metadata <options> <input>
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
-q, --quiet Suppress info and warning messages
--vits-csv <file> Write VITS information as CSV
--vbi-csv <file> Write VBI information as CSV
--ffmetadata <file> Write navigation information as FFMETADATA1
Arguments:
input Specify input JSON file
This application uses the drop-out information in the JSON metadata file to perform dropout correction on the input TBC file and produces a new output file. The current version of the corrector uses framing in order to provide inter-field correction. Note that inter-field correction may not function correctly for NTSC pull-down sources.
Syntax:
ld-dropout-correct <options> <input TBC file name> <output TBC file name>
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
--input-json <filename> Specify the input JSON file (default input.json)
--output-json <filename> Specify the output JSON file (default output.json)
-r, --reverse Reverse the field order to second/first (default
first/second)
-o, --overcorrect Over correct mode (use on heavily damaged sources)
-i, --intra Force intrafield correction (default interfield)
-t, --threads <number> Specify the number of concurrent threads (default
is the number of logical CPUs)
Arguments:
input Specify input TBC file (- for piped input)
output Specify output TBC file (omit or - for piped
output)
This application takes the PAL or NTSC TBC input video and performs chroma decoding (i.e colourises it). Output is a sequence of RGB 16-16-16 video frames suitable for pipelining to an external application such as ffmpeg.
Syntax:
ld-chroma-decoder <options> <input TBC file name> (<output RGB file name>)
The output RGB file name is optional. If omitted the output will be sent to stdout (for pipe-lining).
Most of the options here correspond to settings in ld-analyse's 'Chroma decoder configuration' window, so you can experiment with them interactively using ld-analyse. For more information on what the settings mean, see the ld-analyse User Guide.
The mono filter isn't available in ld-analyse. It treats the whole signal as being luma, so it's the best choice when you know that the input video doesn't contain any colour information (e.g. black-and-white films).
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
-q, --quiet Suppress info and warning
messages
--input-json <filename> Specify the input JSON file
(default input.json)
-s, --start <number> Specify the start frame number
-l, --length <number> Specify the length (number of
frames to process)
-r, --reverse Reverse the field order to
second/first (default
first/second)
--chroma-gain <number> Gain factor applied to chroma
components (default 1.0)
--chroma-phase <number> Phase rotation applied to chroma
components (degrees; default 0.0)
-p, --output-format <output-format> Output format (rgb, yuv, y4m;
default rgb); RGB48, YUV444P16,
GRAY16 pixel formats are supported
-b, --blackandwhite Output in black and white
--pad, --output-padding <number> Pad the output frame to a
multiple of this many pixels on
both axes (1 means no padding,
maximum is 32)
-f, --decoder <decoder> Decoder to use (pal2d,
transform2d, transform3d, ntsc1d,
ntsc2d, ntsc3d, ntsc3dnoadapt,
mono; default automatic)
-t, --threads <number> Specify the number of concurrent
threads (default number of logical
CPUs)
--ffll, --first_active_field_line <number> The first visible line of a
field. Range 1-259 for NTSC
(default: 20), 2-308 for PAL
(default: 22)
--lfll, --last_active_field_line <number> The last visible line of a field.
Range 1-259 for NTSC (default:
259), 2-308 for PAL (default: 308)
--ffrl, --first_active_frame_line <number> The first visible line of a
frame. Range 1-525 for NTSC
(default: 40), 1-620 for PAL
(default: 44)
--lfrl, --last_active_frame_line <number> The last visible line of a frame.
Range 1-525 for NTSC (default:
525), 1-620 for PAL (default: 620)
-o, --oftest NTSC: Overlay the adaptive filter
map (only used for testing)
--chroma-nr <number> NTSC: Chroma noise reduction
level in dB (default 0.0)
--luma-nr <number> Luma noise reduction level in dB
(default 1.0)
--simple-pal Transform: Use 1D UV filter
(default 2D)
--transform-mode <mode> Transform: Filter mode to use
(level, threshold; default
threshold)
--transform-threshold <number> Transform: Uniform similarity
threshold in 'threshold' mode
(default 0.4)
--transform-thresholds <file> Transform: File containing
per-bin similarity thresholds in
'threshold' mode
--show-ffts Transform: Overlay the input and
output FFTs
--ntsc-phase-comp Use NTSC QADM decoder taking
burst phase into account (BETA)
Arguments:
input Specify input TBC file (- for
piped input)
output Specify output file (omit or -
for piped output)
This GUI application provides a range of features for examining TBC output including drop-out detection, video extent, line scope and VBI data. The application works with NTSC and PAL TBC output files.
Note: The input file name is optional (you can either specify it from the command line or using the GUI once the application is running).
For more information about ld-analyse please see the ld-analyse User Guide
Syntax:
ld-analyse <options> <input TBC file name>
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
Arguments:
input Specify input TBC file
This application processes the .efm output from ld-decode into either digital audio or data. The application implements both audio and data error detection and correction. Audio output is a stereo 44.1KHz 16-bit PCM file. Note that this tool can be run as an interactive GUI or non-interactive via the CLI. Many more decoding options are available in the GUI for more complex EFM processing.
Syntax:
ld-process-efm <options> <input EFM file name> (<output PCM file name>)
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
-n, --noninteractive Run in non-interactive mode
Arguments:
input Specify input EFM file
output Specify output audio file
GUI options:
- Audio
- Conceal corrupt audio data - Attempts to conceal corrupt audio data using the concealment type selected in the following section
- Silence corrupt audio data - Silences any corrupt samples
- Pass-through corrupt audio data - Passes any corrupt samples through to the output as-is
- Concealment type
- Linear interpolation - Interpolates between last-good and next-good samples to conceal errors
- Interpolated error prediction - Experimental (not recommended)
- Options
- Pad start of audio from 00:00 to match initial disc time - Pads the start of the input sample to ensure the output starts from the 00:00 time of the disc. Useful for assembling partial captures.
- Decode F1 frames as audio - Always decode F1 frames as if they contain audio data (useful for older discs)
- Decode F1 frames as data - Always decode F1 frames as if they contain data (useful for older IV discs)
- Non-standard audio decode (no time-stamp information)
- Development
- EFM to F3 Frame debug
- F3 and section debug
- F3 to F2 Frame decoding debug
- F2 to F1 Frame decoding debug
- F1 Frame to audio samples debug
- F1 Frame to data sector debug
This application can accept 10-bit packed format .lds files and convert them to 16-bit signed files or vice-versa (useful for expanding .lds files and piping the output to a compression utility such as FLAC).
Syntax:
ld-lds-converter <options>
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
-q, --quiet Suppress info and warning messages
-i, --input <file> Specify input laserdisc sample file (default is stdin)
-o, --output <file> Specify output laserdisc sample file (default is stdout)
-u, --unpack Unpack 10-bit data into 16-bit (default)
-p, --pack Pack 16-bit data into 10-bit
-r, --riff Unpack 10-bit data into 16-bit with RIFF WAV headers
This application scans through the metadata for a .tbc file and attempts to correct metadata and video data to ensure the .tbc contains the correct amount of frames, in the right order, without duplication. The application also pads the .tbc with dummy (black) frames when one or more frames are missing.
It is recommended to run ld-process-vbi on the input .tbc before running this tool.
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
-r, --reverse Reverse the field order to second/first (default first/second)
-m, --maponly Only perform mapping, but do not save to target (for testing
purposes)
Arguments:
input Specify input TBC file
output Specify output TBC file
This application performs 'stacking' of multiple versions of the same media ideally different copies with exact same mastered contents.
Disc stacking requires a minimum of two input sources in order to work although more = better so there is no limit.
Stacking is performed by taking all available input sources and, pixel by pixel, determining the number of available sources for the pixel (by removing outliers marked as dropouts in the source files). If more than 3 sources are available for the pixel the tool will use the median value of the available sources as the output (when there are an even number available of pixel sources, the two centre values of the median are averaged to the output). If only two sources are available an average is used. If only one source is available it is passed directly as the output.
If no sources are available for a pixel the tool will attempt to use differential dropout detection (diffDOD) to recover a value (in the case where ld-decode marked the pixel as a false-negative) unless the --no-diffdod option is specified.
If the --passthrough option is specified the tool will, when all pixel sources are marked as a dropout, mark the resulting output pixel as a dropout (regardless of the diffDOD result). The --passthrough is useful in non-preservation cases where it is desirable for master plate errors (which cause dropouts in the same place on all resulting LaserDisc copies) to be marked for dropout concealment (where-as diffDOD would correctly identify the plate error as present on all discs (and therefore not an error)).
Use the tool by specifying the available input .tbc files followed by the desired .tbc output file.
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
-q, --quiet Suppress info and warning messages
--input-json <filename> Specify the input JSON file for the first input
file (default input.json)
--output-json <filename> Specify the output JSON file (default output.json)
-r, --reverse Reverse the field order to second/first (default
first/second)
-t, --threads <number> Specify the number of concurrent threads (default
is the number of logical CPUs)
--no-diffdod Do not use differential dropout detection on low
source pixels
--passthrough Pass-through dropouts present on every source
Arguments:
inputs Specify input TBC files (- as first source for
piped input)
output Specify output TBC file (omit or - for piped
output)
This application performs an analysis of the VITS (Vertical Interval Test Signals) and recalculates the white and black SNR values in the metadata. Note that any TBC file will already have this metadata provided by ld-decode. This tool is generally used along with dropout correction and stacking as the video content of the TBC is modified - running ld-process-vits therefore allows you update the SNR metadata in order to analyse the result (using ld-analyse).
Use the tool by specifying the required input .tbc file. The tool will backup the previous JSON file (to .vbup) before proceeding.
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --debug Show debug
-q, --quiet Suppress info and warning messages
--input-json <filename> Specify the input JSON file (default input.json)
--output-json <filename> Specify the output JSON file (default same as
input)
-n, --nobackup Do not create a backup of the input JSON metadata
-t, --threads <number> Specify the number of concurrent threads (default
is the number of logical CPUs)
Arguments:
input Specify input TBC file
- FAQ - Frequently Asked Questions
- Diagram Breakdowns
- Visual-Comparisons
- VCR Reports / RF Tap Examples
- Download & Contribute Data
- Speed Testing
- Visual VBI Data Guide
- Closed Captioning
- Teletext
- WSS Wide - Screen Signalling
- VITC Timecode
- VITS Signals
- XDS Data (PBS)
- Video ID IEC 61880
- Vapoursynth TBC Median Stacking Guide
- Ruxpin-Decode & TV Teddy Tapes
- Tony's GNU Radio For Dummies Guide
- Tony's GNU Radio Scripts
- DomesDay Duplicator Utilities
- ld-decode Utilities