Home - gingeradditive/OrcaSlicer GitHub Wiki
Welcome to the OrcaSlicer WIKI!
Orca slicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki page aims to provide an detailed explanation of the slicer settings, how to get the most out of them as well as how to calibrate and setup your printer.
[!NOTE] The Wiki is Work In Progress so bear with us while we get it up and running!
Please consider contributing to the wiki following the How to contribute to the wiki guide.
Prepare
First steps to prepare your model/s for printing.
Print Settings, Tips and Tricks
The below sections provide a detailed settings explanation as well as tips and tricks in setting these for optimal print results.
Quality Settings
Speed Settings
Strength Settings
Material Settings
Printer Settings
- Air filtration/Exhaust fan handling
- Auxiliary fan handling
- Chamber temperature control
- Adaptive Bed Mesh
- Using different bed types in Orca
Printer Calibration
The Calibration Guide outlines Orca’s key calibration tests and their suggested order of execution.
- Temperature
- Flow Rate
- Pressure Advance
- Retraction
- Tolerance
- Advanced:
Developer Section
This is a documentation from someone exploring the code and is by no means complete or even completely accurate. Please edit the parts you might find inaccurate. This is probably going to be helpful nonetheless.