Whats new - SIMLabHAW/SIMLab-Emergency-Simulator GitHub Wiki

The current Emergency Simulator has many new features when compared to its previous version of 2018. That being so, this page describes the most relevant modifications and new features of the new ES application.

---

• Curve is now coupled with the value of the heart rate
• Curve can now change dynamically (e.g. over 2 min)
• ECG duration is now based on HF

To get detail information about the ECG functionality, click here .

• Curve coupled with the ECG curve (in pulse wave design)
• Curve can change dynamically (e.g. over 2 min)
• Wave gets shallower

To get detail information about the SpO₂ functionality, click here.

• Length of the curve coupled to the respiratory rate
• Height of the curve coupled to the EtCO₂ value
• Values are cut off above 50mmHg
• Improved capnogram
• EtCO₂ measurements are now shown
• Respiratory rate is now shown

To get detail information about the EtCO₂ functionality, click here.

• Sound of ECG enabled only when SpO₂ is not connected
• ECG / SpO₂ sound volume change in 10% steps
• Sound off option enabled
• ECG-peak sound enabled
• SpO₂-peak sound enabled (based on SpO₂ max value)
• NIBP sound enabled
• SpO₂ sound now has higher priority than ECG sound
• SpO₂ sound frequency decreases for lower frequencies
• Below 40% of SpO₂ no sound is available now
• EtCO₂ with no sound (only with alarm)
• Sound of Non-Invasive blood pressure measurement enabled

• Alarm boundaries can be changed for each value

To get an overview of the alarms configuration, click here.

• ES logo created
• User logon page redesigned
• Trainer view and trainee view redesigned
• Clock for logged on time created
• PDF export created
• Measurement module created
• Alarm management module created
• Sound module created
• Alarm sound created
• NIBP history created
• Screenshot button created
• Freeze curve option created
• CPR option created

• Start-button for manual measurement
• Device measures once and shows the value
• Possibility to choose different time of measurements
• Show systolic and diastolic values
• Countdown until next NIBP measurement occurs
• Show NIBP systolic and diastolic values
• Average arterial pressure value available

Click here to get more information about the NIBP.

• Show and choose energy level
• Frequency shifting while defibrillator loads
• Loading time depending on energy level
• Sound indication for shocks when ready to apply
• Automatic discharge if no shock is given after 30s
• Synchronized defibrillator with the R peak

Click here to see more about the Defibrillator feature.

• Choose frequency (Hz) and energy (mA)
• If output threshold reached, QRS complex paced
• Deliver the rate of the pacing
• Show ECG peak in front of the QRS complex

Click here to understand functionality of the pacer feature.

• AV Block 3
• ST Elevation

Click here and see more about the pathologies present in the ES.

---

Related pages:

• Features