Page Index - LDmicro/LDmicro GitHub Wiki

189 page(s) in this GitHub Wiki:

• Home
• AC Phase Control
• Please reload this page
• Acceleration Deceleration
• Please reload this page
• ADC Voltage Reference
• Please reload this page
• Bipolar stepper motor. Phase current waveforms
• Please reload this page
• BUS TRASER
• Please reload this page
• COIL
• Please reload this page
• CONTACTS and COILS
• Please reload this page
• Copy, paste, cut, etc
• Please reload this page
• DELAY us
• Please reload this page
• DELAY(us) with variable duration
• Please reload this page
• Disable Pull up resistors
• Please reload this page
• DMX512 controlled Led Balls
• Please reload this page
• GOTO instruction
• Please reload this page
• HOW TO
• Please reload this page
• How to count the resets caused by WDT
• Please reload this page
• How to measure battery voltage
• Please reload this page
• How to measure voltage (PIC)
• Please reload this page
• HOW TO: 7 segment display, 7SEG & BUS
• Please reload this page
• HOW TO: Bluetooth1
• Please reload this page
• HOW TO: Change USART Baud Rate
• Please reload this page
• HOW TO: Compile LDmicro
• Please reload this page
• HOW TO: Integrate LDmicro and Arduino software
• Please reload this page
• HOW TO: Integrate LDmicro and AVR Studio or PIC MPLAB software
• Please reload this page
• HOW TO: LDmicro generate time intervals and output signals frequencies
• Please reload this page
• HOW TO: Look Up Table, UART SEND
• Please reload this page
• HOW TO: RF (315MHz, 418MHz, 433MHz, 915MHz) modules with PIC's and AVR's
• Please reload this page
• HOW TO: Soft start and smooth stop of LED with hardware PWM
• Please reload this page
• HOW TO: Soft start and smooth stop of LED with software PWM
• Please reload this page
• HOW TO: Sound three tone
• Please reload this page
• HOW TO: The AND, OR, XOR logic operations on CONTACTs inputs
• Please reload this page
• HOW TO: Two three phase sine wave based on the hardware PWM
• Please reload this page
• HOW TO: Using LDmicro and Arduino board without an Arduino software
• Please reload this page
• Incremental QUADRATURE ENCODER
• Please reload this page
• Incremental QUADRATURE ENCODER controls the brightness of the LED (PWM out)
• Please reload this page
• Kind of inputs of ladder elements
• Please reload this page
• LDmicro and AVR GCC, Atmel AVR Toolchain, WinAVR C
• Please reload this page
• LDmicro and Arduino
• Please reload this page
• LDmicro and CCS C for PIC
• Please reload this page
• LDmicro and CodeVisionAVR C
• Please reload this page
• LDmicro and HI TECH C for PIC
• Please reload this page
• LDmicro and projects:
• Please reload this page
• LDmicro color schemes
• Please reload this page
• LDmicro HOW IT WORK:
• Please reload this page
• LDmicro indirect addressing
• Please reload this page
• LDmicro IRL
• Please reload this page
• LDmicro localization
• Please reload this page
• LDmicro PWM
• Please reload this page
• LDmicro RANDOM
• Please reload this page
• LDmicro to Arduino. Step by step.
• Please reload this page
• LDmicro, Arduino, LCD
• Please reload this page
• Machine for welding steel mesh with adjustable mesh size
• Please reload this page
• Magno Medeiros PLC
• Please reload this page
• MAKE PERSISTENT operation
• Please reload this page
• MASTER CONTROL RELAY
• Please reload this page
• NEW: PIC Enhanced Mid Range Products
• Please reload this page
• NEW: PIC 8 pins micros
• Please reload this page
• OPEN CIRCUIT, SHORT CIRCUIT
• Please reload this page
• OSR, OSF, ODR, ODF, OSC
• Please reload this page
• PIC Configuration Bits
• Please reload this page
• PIC Configuration Bits (part 2)
• Please reload this page
• PIC Configuration Bits (part 3)
• Please reload this page
• PLC and safety
• Please reload this page
• PLC ATmega8
• Please reload this page
• PLC Cycle Time 0
• Please reload this page
• Pull down resistors
• Please reload this page
• Pull up resistors
• Please reload this page
• PULSER
• Please reload this page
• Replace the obsolete elements
• Please reload this page
• RESET PWM
• Please reload this page
• Servo PWM
• Please reload this page
• SetBit, ClearBit, IfBitSet, IfBitClear in variable
• Please reload this page
• SLEEP example
• Please reload this page
• Some work projects
• Please reload this page
• SPI: Serial Peripheral Interface
• Please reload this page
• Sponsorship
• Please reload this page
• Stopwatch1 over UART
• Please reload this page
• Stopwatch1 over UART, part 2
• Please reload this page
• Stopwatch1 over UART; part 3
• Please reload this page
• Stopwatch2 with 7 segments LED displays
• Please reload this page
• Stopwatch3 over serial LCD based on HD44780 controller
• Please reload this page
• Stopwatch4 over serial 7 segment LED displays
• Please reload this page
• SUBPROG, ENDSUB and GOSUB instruction
• Please reload this page
• SUBPROG, RETURN, ENDSUB and GOSUB, LABEL and GOTO instruction. Part 2
• Please reload this page
• SUBPROG, RETURN, ENDSUB and GOSUB, LABEL and GOTO instruction. Part 3
• Please reload this page
• TIME to COUNTER converter
• Please reload this page
• Timer with variable delay
• Please reload this page
• TODO & DONE
• Please reload this page
• TOF test
• Please reload this page
• TON, TOF, etc. in v2.3 and v3.5.3 and later
• Please reload this page
• TON, TOF, etc.
• Please reload this page
• UART communication FAQ
• Please reload this page
• UART communication FAQ part 2
• Please reload this page
• Unipolar stepper motor. Phase current waveforms
• Please reload this page
• X segment LED display, font example
• Please reload this page