Page Index - ChrGri/DIY-Sim-Racing-FFB-Pedal GitHub Wiki
77 page(s) in this GitHub Wiki:
- Home
- Force Feedback Pedals
- Building your own
- Where to begin
- How does it work?
- Choosing a pedal design
- Choosing connectivity
- Wireless
- USB from the pedal to your PC
- Bluetooth
- Choosing your control board
- Gilphilbert PCBA
- V6 PCB
- Pedal building steps
- 1. Hardware
- 2. Flash the firmware
- 3. Electronics
- 4. Software setup
- 5. Customize your pedal
- 6. Enjoy!
- 7. Issue handling and analyzing
- AS1256 optimization
- Please reload this page
- Brake resistor
- Please reload this page
- Calibrate loadcell
- Please reload this page
- Complete the software
- Please reload this page
- Configuration Management (0.90.23 and later)
- Please reload this page
- Development
- Please reload this page
- Electronics setup
- Please reload this page
- Experiments with different Damper Elements
- Please reload this page
- Flashing firmware
- Please reload this page
- Frequently Asked Questions
- Please reload this page
- Hardware designs
- Please reload this page
- Improving the loadcell reading
- Please reload this page
- iSV57 servo communication
- Please reload this page
- Pedal Effects
- Please reload this page
- Pedal Joystick out and comunication with Simhub
- Please reload this page
- Pedal Profile Management(0.90.25 and later)
- Please reload this page
- Pedal theory
- Please reload this page
- Pedal theory part 2 (in work)
- Please reload this page
- PID tuning
- Please reload this page
- Profile Binding(Legacy)
- Please reload this page
- Quantifying Loadcell Signal Fluctuations Under Dynamic Pedal Operation
- Please reload this page
- Rudder
- Please reload this page
- Simhub dash FFB Pedal control panel on phone or tablet
- Please reload this page
- Simhub Dashboard Overlay
- Please reload this page
- Updating pedal firmware(For V3 board)
- Please reload this page
- vJoy output
- Please reload this page
- Wheel Slip Notification
- Please reload this page
- Wireless setup
- Please reload this page