Antenna Genius TCPIP stack - 4o3a/genius-api-docs GitHub Wiki
Lists available AG devices on LAN to pair (stack) together.
C<seq_number>|stack list
Example:
C16|stack list
The command will return the available AG table in multiple responses with the same <seq_number>, containing a message with the AG information, prior to returning the OK status.
See Response Format for details on the format of the response messages from the radio
Response example:
R16|0|stack serial=C7-F6-5C name=Antenna_Genius antennas=8 ports=2
R16|0|stack serial=92-3A-DC name=Antenna_Genius antennas=8 ports=2
R16|0|
| Parameter | Value |
|---|---|
| serial | AG serial number - used for stacking |
| name | Custom set device name |
| antennas | Number of antenna ports on the device |
| ports | Number of radio ports on the device |
Gets the configured values for AG stacking
C<seq_number>|stack get
Example:
C17|stack get
See Response Format for details on the format of the response messages from the radio
Response Example:
R17|0|stack in_use=1 serial=9A-3A-DC mode=1
| Parameter | Value |
|---|---|
| in_use | Boolean representing if stacking is enabled |
| serial | AG serial number - used for stacking |
| mode | Stacking mode - 0 = A/B switch, 1 = Using ports 7&8 |
This command is used to configure stack parameters.
C<seq_number>|stack set <in_use> [serial=<serial_no>] [mode=<mode>]
<in_use> = boolean representing if stacking is enabled
<serial> = AG serial number
<mode> = Stacking mode - 0 = A/B switch, 1 = Using ports 7&8
Example:
C7|stack in_use=1 serial=AB-CD-EF mode=1
See Response Format for details on the format of the response messages from the device
Response Example:
R7|0|
Whenever the mode is changed, each connected client that previously executed sub antenna will receive the antenna reload update status indicating that the antenna list has changed.
