4.5a SpeedyBee F405v3 config - terrytaylorbonn/auxdrone GitHub Wiki

(24.0514: cleaned up this page; docx's cleaned up (big job) and renamed)

Gdrive.

Finally, the really big job.

  • Connect all the peripherals to the FC.
  • Configure the FC params (using BF (Betaflight) configurator, INAV configurator, AP (Ardupilot) MP/QGC)
  • Optional: Install/config the FPV camera, VTX, antennas (not required for flight; could install later).

For the SBee F405v3 there are 4 configs

  • F405 quadcopter (1) bf, (2) ardu, (3) inav
  • F405-plane (4) inav (future)

Status of 4 configs:

  • (1) BF (betaflight) WORKED!

    • 4a.5-01_config_sbee_bf_(brodie)_v07_24.0414.docx
  • (2) AP (ardupilot) (failed)

    • 4a.5-11_config_sbee_ardu_cube-prog-2.16_bug_v03_24.0423_0514.docx. I could not program because of a bug in cube programmer 2.16.
    • 4a.5-12_config_sbee_ardu_cube-prog-2.15_ok_v04_24.0429_0514.docx. I could program (2.15), but could not get motors to tunr (had the same problem with ardu on pixhawk 6c).
  • (3) INAV (24.0507)

    • 4a.5-21_config_sbee_inav_(need_stick_level_fix)_v02_24.0517_0514.docx. Worked! However, need to adjust the stick settings (complicated in inav).
  • (4) INAV -- F405-WING

    • 4a.5-31_config_f405-wing_inav_v01_24.0514.docx (just notes... maybe try in future).

F405

image