24.0623

See file 2.3_(4a.6-22)_config_sbee_vtx_v05_24.0518_0523.docx on gdrive

the rest of this page are (chaotic) notes

---

24.0605

Є-Дрон

Albert Kim

The SKY04X PRO is the upgrade version of SKY04X, with new optics and a new OLED panel, the skyzone 04x pro can give pilot 52 degrees of field of view, giving huge immersive fpv experience, also with a new OLED panel, the 1920*1080 resolution, and a 100FPS frame rate, use can have way better experience when using the digital VRX system.

The skyzone 04x pro new matte painting also avoid fingerprints and reduces glare.

To be aware, To cool the high-performance OLED panel, the right side bay is installed with cooling fan, so SKY04 X PRO didn't support quadversity mode.

Specifications:

Screen: OLED Resolution: 19201080 FOV (Diagonal): 52° Aspect Ratio: 4:3/16:9 Focus: -6~+2 adjustable Interpupillary distance(IPD): 58-71mm Receiver: 5.8Ghz 48CH V3.3 Steadyview Receiver DVR: H264, 60fps Voltage Input: 2~6SLiPo HDMI IN: 720P 100FPS Head Tracker: 3-axis Accelerometer, 3-axis gyroscope Dimensions: 18575*67mm Weight: 267g

Package Included:

1x SKY04X Pro Goggles 1x Steadyview V3.3 Receiver Module 2x Faceplate (wide and narrow) 1x Sponge with Velcro 1x Zipper case 1x Power cable 1x Headtracker cable 2x 5.8GHz 2dB antennas 1x Video/Audio Cable 1x USB-C Cable 1x SKY04x Pro User Manual

---

24.0602

there is some "joystick" thing to use to modify camera settings (i noticed the extra wires on my camera, but thought they were unused). this joystick is no longer available?

iNav 5.0 Beginner's Build Academy: Lesson 05 - Installing the FPV gear https://youtu.be/K2Z73oPvKg0?list=PLtuty5zAsZ_aKbk9h9hbVG-TySq1W4C14&t=1086

---

24.0602 smart audio ( / IRC tramp ??)

used to lower power levels.. thats probably what killed the sbee vtx. need to make sure same not happen with zeus (was running really hot).

https://oscarliang.com/hglrc-zeus-nano-vtx/

vtx tables

ports

mixes

programming

WORKS! flashes red 1x (power lowest), blue 3x (band c) , green 2x (channel 2) (power and channel did not change; band did)

vtx admin

original band, channel, power

set band, channel, power

send to vtx zeus

WORKS! flashes red 1x (power lowest), blue 1x (band a) , green 2x (channel 2)

#get vtx_power
vtx_power = 4
Allowed range: 1 - 5
# set vtx_power = 1
vtx_power set to 1
# get vtx_power
vtx_power = 1
Allowed range: 1 - 5

# get vtx_band
vtx_band = 3
Allowed range: 1 - 5
# get vtx_channel
vtx_channel = 2
Allowed range: 1 - 8
# get vtx_frequency_group
vtx_frequency_group = FREQUENCYGROUP_5G8
Allowed values: FREQUENCYGROUP_5G8, FREQUENCYGROUP_2G4, FREQUENCYGROUP_1G3

iNav 5.0 Beginner's Build Academy: Lesson 05 - Installing the FPV gear https://youtu.be/K2Z73oPvKg0?list=PLtuty5zAsZ_aKbk9h9hbVG-TySq1W4C14&t=525

https://oscarliang.com/vtx-control/

https://www.youtube.com/watch?v=5q4IHeiX_8Q

https://youtu.be/yIcRf_xSujc?t=1124

• 00:18:27 - Load the vtxtable
• 00:19:59 - Check that the FC is talking to the vTX correctly
• 00:21:23 - Protect the camera joystick with your LIFE

---

24.0602

https://oscarliang.com/vtx-control/

---

24.0603

Tried Sbee vtx again today.. kind of worked. I think the problem is the crap Sbee quality. Nice packaging, good marketing, crap components. (the FC/ESC stack also had problems... bad connector on the FC, and a motor wire pad on the ESC came loose and is still hanging by a thread). The zeus vtx is working (so far). the joy of working with mainland brand chinese components.

this worked once (with this antenna)... then not again. i tried various things... could not get it work again... once the video appeared in very bad quality, came in and out, but then disappeared. appears to be bad vtx. .

smartaudio did not seem to work. IRC tramp did... i could set from the TX-12 lua, and the FC would beep in acknowl, but the change would not be there for a cli get xxxxx.

crap speedybee junk.

# get vtx_power
vtx_power = 1
Allowed range: 1 - 5
# get vtx_band
vtx_band = 1
Allowed range: 1 - 5
# get vtx_channel
vtx_channel = 2
Allowed range: 1 - 8
# set vtx_band = 2
vtx_band set to 2
# get vtx_band
vtx_band = 2
Allowed range: 1 - 5