TypesAndStructures - shihuade/openh264 GitHub Wiki

SVC Encoding Parameters extention.

Name	Type	Descritpion
iUsageType	EUsageType	application type;1.CAMERA_VIDEO_REAL_TIME:camera video signal;2.SCREEN_CONTENT_REAL_TIME:screen content signal;
iPicWidth	int	width of picture in luminance samples (the maximum of all layers if multiple spatial layers presents)
iPicHeight	int	height of picture in luminance samples((the maximum of all layers if multiple spatial layers presents)
iTargetBitrate	int	target bitrate desired
iRCMode	RC_MODES	rate control mode
fMaxFrameRate	float	maximal input frame rate
iTemporalLayerNum	int	temporal layer number, max temporal layer = 4
iSpatialLayerNum	int	spatial layer number,1<= iSpatialLayerNum <= MAX_SPATIAL_LAYER_NUM, MAX_SPATIAL_LAYER_NUM = 4
sSpatialLayers	SSpatialLayerConfig
iComplexityMode	ECOMPLEXITY_MODE
uiIntraPeriod	unsigned int	period of Intra frame
iNumRefFrame	int	number of reference frame used
bEnableSpsPpsIdAddition	bool	false:not adjust ID in SPS/PPS; true: adjust ID in SPS/PPS
bPrefixNalAddingCtrl	bool	false:not use Prefix NAL; true: use Prefix NAL
bEnableSSEI	bool	false:not use SSEI; true: use SSEI
iPaddingFlag	int	0:disable padding;1:padding
iEntropyCodingModeFlag	int	0:CAVLC 1:CABAC.
bEnableFrameSkip	bool	False: don't skip frame even if VBV buffer overflow.True: allow skipping frames to keep the bitrate within limits.
iMaxBitrate	int	the maximum bitrate
iMaxQp	int	the maximum QP encoder supports
iMinQp	int	the minmum QP encoder supports
uiMaxNalSize	unsigned int	the maximum NAL size. This value should be not 0 for dynamic slice mode
bEnableLongTermReference	bool	1: on, 0: off
iLTRRefNum	int	the number of LTR(long term reference),TODO: not supported to set it arbitrary yet
iLtrMarkPeriod	unsigned int	the LTR marked period that is used in feedback.
iMultipleThreadIdc	unsigned short	1 # 0: auto(dynamic imp. internal encoder); 1: multiple threads imp. disabled; lager than 1: count number of threads;
iLoopFilterDisableIdc	int	0: on, 1: off, 2: on except for slice boundaries
iLoopFilterAlphaC0Offset	int	AlphaOffset: valid range [-6, 6], default 0.
iLoopFilterBetaOffset	int	BetaOffset: valid range [-6, 6], default 0.
bEnableDenoise	bool	denoise control
bEnableBackgroundDetection	bool	background detection control //VAA_BACKGROUND_DETECTION //BGD cmd
bEnableAdaptiveQuant	bool	adaptive quantization control
bEnableFrameCroppingFlag	bool	enable frame cropping flag: TRUE always in application
bEnableSceneChangeDetect	bool
bIsLosslessLink	bool	LTR advanced setting.

Option types introduced in decoder application.

Name	Initializer	Descritpion
DECODER_OPTION_DATAFORMAT	= 0	color format, now supports 23 only (I420)
DECODER_OPTION_END_OF_STREAM		end of stream flag
DECODER_OPTION_VCL_NAL		feedback whether or not have VCL NAL in current AU for application layer
DECODER_OPTION_TEMPORAL_ID		feedback temporal id for application layer
DECODER_OPTION_FRAME_NUM		feedback current decoded frame number
DECODER_OPTION_IDR_PIC_ID		feedback current frame belong to which IDR period
DECODER_OPTION_LTR_MARKING_FLAG		feedback wether current frame mark a LTR
DECODER_OPTION_LTR_MARKED_FRAME_NUM		feedback frame num marked by current Frame
DECODER_OPTION_ERROR_CON_IDC		not finished yet, indicate decoder error concealment status, in progress
DECODER_OPTION_TRACE_LEVEL
DECODER_OPTION_TRACE_CALLBACK		a void (*)(void* context, int level, const char* message) function which receives log messages
DECODER_OPTION_TRACE_CALLBACK_CONTEXT		context info of trace callbac
DECODER_OPTION_GET_STATISTICS

SVC Decoding Parameters, reserved here and potential applicable in the future.

Name	Type	Descritpion
pFileNameRestructed	char *	file name of reconstructed frame used for PSNR calculation based debug
eOutputColorFormat	EVideoFormatType	color space format to be outputed, EVideoFormatType specified in codec_def.h
uiCpuLoad	unsigned int	CPU load.
uiTargetDqLayer	unsigned char	setting target dq layer id
eEcActiveIdc	ERROR_CON_IDC	whether active error concealment feature in decoder
sVideoProperty	SVideoProperty	video stream property

Structure for source picture.

Name	Type	Descritpion
iColorFormat	int	color space type
iStride	int	stride for each plane pData
pData	unsigned char *	plane pData
iPicWidth	int	luma picture width in x coordinate
iPicHeight	int	luma picture height in y coordinate
uiTimeStamp	long long

Option types introduced in SVC encoder application.

Name	Initializer	Descritpion
ENCODER_OPTION_DATAFORMAT	= 0
ENCODER_OPTION_IDR_INTERVAL		IDR period,0/-1 means no Intra period (only the first frame); lager than 0 means the desired IDR period, must be multiple of (2^temporal_layer)
ENCODER_OPTION_SVC_ENCODE_PARAM_BASE		structure of Base Param
ENCODER_OPTION_SVC_ENCODE_PARAM_EXT		structure of Extension Param
ENCODER_OPTION_FRAME_RATE		maximal input frame rate, current supported range: MAX_FRAME_RATE = 30,MIN_FRAME_RATE = 1
ENCODER_OPTION_BITRATE
ENCODER_OPTION_MAX_BITRATE
ENCODER_OPTION_INTER_SPATIAL_PRED
ENCODER_OPTION_RC_MODE
ENCODER_PADDING_PADDING		0:disable padding;1:padding
ENCODER_OPTION_PROFILE		assgin the profile for each layer
ENCODER_OPTION_LEVEL		assgin the level for each layer
ENCODER_OPTION_NUMBER_REF		the number of refererence frame
ENCODER_OPTION_DELIVERY_STATUS		the delivery info which is a feedback from app level
ENCODER_LTR_RECOVERY_REQUEST
ENCODER_LTR_MARKING_FEEDBACK
ENCODER_LTR_MARKING_PERIOD
ENCODER_OPTION_LTR		0:disable LTR;larger than 0 enable LTR; LTR number is fixed to be 2 in current encoder
ENCODER_OPTION_COMPLEXITY
ENCODER_OPTION_ENABLE_SSEI		enable SSEI: true enable ssei; false disable ssei
ENCODER_OPTION_ENABLE_PREFIX_NAL_ADDING		enable prefix: true enable prefix; false disable prefix
ENCODER_OPTION_ENABLE_SPS_PPS_ID_ADDITION		enable pSps/pPps id addition: true enable pSps/pPps id; false disable pSps/pPps id addistion
ENCODER_OPTION_CURRENT_PATH
ENCODER_OPTION_DUMP_FILE		dump layer reconstruct frame to a specified file
ENCODER_OPTION_TRACE_LEVEL		trace info based on the trace level
ENCODER_OPTION_TRACE_CALLBACK		a void (*)(void* context, int level, const char* message) function which receives log messages
ENCODER_OPTION_TRACE_CALLBACK_CONTEXT		context info of trace callback
ENCODER_OPTION_GET_STATISTICS		read only
ENCODER_OPTION_STATISTICS_LOG_INTERVAL		log interval in millisecond
ENCODER_OPTION_IS_LOSSLESS_LINK		advanced algorithmetic settings

Buffer info.

Name	Type	Descritpion
iBufferStatus	int	0: one frame data is not ready; 1: one frame data is ready
sSystemBuffer	SSysMEMBuffer	memory info for one picture
UsrData	union SBufferInfo::@2	output buffer info

The capability of decoder.

Name	Type	Descritpion
iProfileIdc	int
iProfileIop	int
iLevelIdc	int
iMaxMbps	int
iMaxFs	int
iMaxCpb	int
iMaxDpb	int
iMaxBr	int
bRedPicCap	bool

SVC Encoding Parameters.

Name	Type	Descritpion
iUsageType	EUsageType	application type;1.CAMERA_VIDEO_REAL_TIME:camera video signal; 2.SCREEN_CONTENT_REAL_TIME:screen content signal;
iPicWidth	int	width of picture in luminance samples (the maximum of all layers if multiple spatial layers presents)
iPicHeight	int	height of picture in luminance samples((the maximum of all layers if multiple spatial layers presents)
iTargetBitrate	int	target bitrate desired
iRCMode	RC_MODES	rate control mode
fMaxFrameRate	float	maximal input frame rate

Frame bit stream info.

Name	Type	Descritpion
iTemporalId	int	temporal ID
iSubSeqId	int	refer to D.2.11 Sub-sequence information SEI message semantics The sub sequence layers are ordered hierarchically based on their dependency on each other so that any picture in a layer shall not be predicted from any picture on any higher layer.
iLayerNum	int
sLayerInfo	SLayerBSInfo
eFrameType	EVideoFrameType
iFrameSizeInBytes	int
uiTimeStamp	long long

Enumerate the type of video format.

Name	Initializer	Descritpion
videoFormatRGB	= 1	rgb color formats
videoFormatRGBA	= 2
videoFormatRGB555	= 3
videoFormatRGB565	= 4
videoFormatBGR	= 5
videoFormatBGRA	= 6
videoFormatABGR	= 7
videoFormatARGB	= 8
videoFormatYUY2	= 20	yuv color formats
videoFormatYVYU	= 21
videoFormatUYVY	= 22
videoFormatI420	= 23	the same as IYUV
videoFormatYV12	= 24
videoFormatInternal	= 25	only used in SVC decoder testbed
videoFormatNV12	= 26	new format for output by DXVA decoding
videoFormatVFlip	= 0x80000000

Enumerate the type of rate control mode.

Name	Initializer	Descritpion
RC_QUALITY_MODE	= 0	quality mode
RC_BITRATE_MODE	= 1	bitrate mode
RC_BUFFERBASED_MODE	= 2	no bitrate control,only using buffer status,adjust the video quality
RC_OFF_MODE	= -1	rate control off mode

Structure for decoder memery.

Name	Type	Descritpion
iWidth	int	width of decoded pic for display
iHeight	int	height of decoded pic for display
iFormat	int	type is "EVideoFormatType"
iStride	int	stride of 2 component

Enumerate the type of error concealment methods.

Name	Initializer	Descritpion
ERROR_CON_DISABLE	= 0
ERROR_CON_FRAME_COPY
ERROR_CON_SLICE_COPY
ERROR_CON_FRAME_COPY_CROSS_IDR
ERROR_CON_SLICE_COPY_CROSS_IDR
ERROR_CON_SLICE_COPY_CROSS_IDR_FREEZE_RES_CHANGE

Enumulate the complexity mode.

Name	Initializer	Descritpion
LOW_COMPLEXITY		the lowest compleixty,the fastest speed,
MEDIUM_COMPLEXITY		medium complexity, medium speed,medium quality
HIGH_COMPLEXITY		high complexity, lowest speed, high quality

Define a new struct to show the property of video bitstream.

Name	Type	Descritpion
size	unsigned int	size of the struct
eVideoBsType	VIDEO_BITSTREAM_TYPE	video stream type (AVC/SVC)

Bitstream inforamtion of a layer being encoded.

Name	Type	Descritpion
uiTemporalId	unsigned char
uiSpatialId	unsigned char
uiQualityId	unsigned char
uiLayerType	unsigned char
iNalCount	int	count number of NAL coded already
pNalLengthInByte	int *	length of NAL size in byte from 0 to iNalCount-1
pBsBuf	unsigned char *	buffer of bitstream contained

Enumerate video frame type.

Name	Initializer	Descritpion
videoFrameTypeInvalid		encoder not ready or parameters are invalidate
videoFrameTypeIDR		IDR frame in H.264.
videoFrameTypeI		I frame type.
videoFrameTypeP		P frame type.
videoFrameTypeSkip		skip the frame based encoder kernel
videoFrameTypeIPMixed		a frame where I and P slices are mixing, not supported yet

Structure for spatial layer configuration.

Name	Type	Descritpion
iVideoWidth	int	width of picture in luminance samples of a layer
iVideoHeight	int	height of picture in luminance samples of a layer
fFrameRate	float	frame rate specified for a layer
iSpatialBitrate	int	target bitrate for a spatial layer
iMaxSpatialBitrate	int	maximum bitrate for a spatial layer
uiProfileIdc	EProfileIdc	value of profile IDC (PRO_UNKNOWN for auto-detection)
uiLevelIdc	ELevelIdc	value of profile IDC (0 for auto-detection)
iDLayerQp	int	value of level IDC (0 for auto-detection)
sSliceCfg	SSliceConfig	slice configuration for a layer

Encoder usage type.

Name	Initializer	Descritpion
CAMERA_VIDEO_REAL_TIME		camera video signal
SCREEN_CONTENT_REAL_TIME		screen content signal

Enumerate the type of video bitstream which is provided to decoder.

Name	Initializer	Descritpion
VIDEO_BITSTREAM_AVC	= 0
VIDEO_BITSTREAM_SVC	= 1
VIDEO_BITSTREAM_DEFAULT	= VIDEO_BITSTREAM_SVC

Enumerate the type of level id.

Name	Initializer	Descritpion
LEVEL_UNKNOWN
LEVEL_1_0
LEVEL_1_B
LEVEL_1_1
LEVEL_1_2
LEVEL_1_3
LEVEL_2_0
LEVEL_2_1
LEVEL_2_2
LEVEL_3_0
LEVEL_3_1
LEVEL_3_2
LEVEL_4_0
LEVEL_4_1
LEVEL_4_2
LEVEL_5_0
LEVEL_5_1
LEVEL_5_2

Enumerate the type of profile id.

Name	Initializer	Descritpion
PRO_UNKNOWN	= 0
PRO_BASELINE	= 66
PRO_MAIN	= 77
PRO_EXTENDED	= 88
PRO_HIGH	= 100
PRO_HIGH10	= 110
PRO_HIGH422	= 122
PRO_HIGH444	= 144
PRO_CAVLC444	= 244
PRO_SCALABLE_BASELINE	= 83
PRO_SCALABLE_HIGH	= 86

Structure for slice configuration.

Name	Type	Descritpion
uiSliceMode	SliceModeEnum	by default, uiSliceMode will be SM_SINGLE_SLICE
sSliceArgument	SSliceArgument

Structure for slice argument.

Name	Type	Descritpion
uiSliceMbNum	unsigned int	only used when uiSliceMode=2;here we use a tmp fixed value since MAX_SLICES_NUM is not defined here and its definition may be changed;
uiSliceNum	unsigned int	only used when uiSliceMode=1
uiSliceSizeConstraint	unsigned int	only used when uiSliceMode=4

Enumerate the type of slice mode.

Name	Initializer	Descritpion
SM_SINGLE_SLICE	= 0	SliceNum==1
SM_FIXEDSLCNUM_SLICE	= 1	according to SliceNum | enabled dynamic slicing for multi-thread
SM_RASTER_SLICE	= 2	according to SlicesAssign | need input of MB numbers each slice. In addition, if other constraint in SSliceArgument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
SM_ROWMB_SLICE	= 3	according to PictureMBHeight | typical of single row of mbs each slice + slice size constraint which including re-encoding
SM_DYN_SLICE	= 4	according to SliceSize | dynamic slicing (have no idea about slice_nums until encoding current frame)
SM_AUTO_SLICE	= 5	according to thread number
SM_RESERVED	= 6

Structure for slice argument.

Name	Type	Descritpion
uiSliceMbNum	unsigned int	only used when uiSliceMode=2;here we use a tmp fixed value since MAX_SLICES_NUM is not defined here and its definition may be changed;
uiSliceNum	unsigned int	only used when uiSliceMode=1
uiSliceSizeConstraint	unsigned int	only used when uiSliceMode=4