Create port forwarding rule on your Ubee EVW32C router - retrotruestory/M1DEV GitHub Wiki

Create port forwarding rule on your Ubee EVW32C router

Follow the below steps, (the steps might slightly vary based on your model) 

    Click on "Add New" / "Create" buttons to create a new port forwarding rule on Ubee EVW32C Router
    Application name / Description: Enter the name of the program. Eg. Xbox, ps2, Minecraft, Xbox One. Note: This is only for your reference.
    Enter the static ip address of the device that we created in step 3 of this guide
    Enter the port to forward. (Enter the same port if you don’t have a range)
    Choose TCP / UDP on your Ubee EVW32C Router. (Choose both if you are not sure)
    If you see a field called “External IP addresses“ enter 0.0.0.0 in it ( And I was trying to use a real external address here the whole time)
    Make sure “Enable” Checkbox is selected if available on your Ubee EVW32C Router
    Click Save when you are finished

And that's it. You have successfully enabled port forwarding on your Ubee EVW32C Router. Let's go ahead and perform a few tests to ensure we haven't goofed up.

⚠️ **GitHub.com Fallback** ⚠️