Point Grey Camera - olinrobotics/gravl GitHub Wiki

1. Go here to create an account and download the FlyCapture SDK for your OS

2. Install the ROS pointgrey_camera_driver using the following command where <ROS version> is the version of ROS that you are using (eg. indigo, kinetic...)

sudo apt-get install ros-<ROS version>-pointgrey-camera-driver

3. You can run this command to list the connected cameras

rosrun pointgrey_camera_driver list_cameras

4. You can run this command launch the driver

roslaunch pointgrey_camera_driver camera.launch

• The official documentation is here

sudo apt install -y libraw1394-11
sudo apt install -y libgtkmm-2.4-dev
sudo apt install -y libglademm-2.4-dev
sudo apt install -y libgtkglextmm-x11-1.2-dev
sudo apt install -y libusb-1.0-0

git clone https://github.com/RhobanDeps/flycapture
cd flycapture
yes | sudo sh install_flycapture.sh

cd ~/catkin_ws/src
git clone https://github.com/ros-drivers/pointgrey_camera_driver.git
cd ..
catkin_make

The CAD for the camera mount is here

Things to remember when collecting data:

• Focus the camera
• run test_pointgrey.py while recording to check on what is being picked up real time.

1. Run this command to install the dependencies

sudo apt-get install libraw1394-11 libgtkmm-2.4-1v5 libglademm-2.4-1v5 libgtkglextmm-x11-1.2-dev libgtkglextmm-x11-1.2 libusb-1.0-0

2. The FlyCapture SDK (a .tar.gz) can be downloaded here

3. Extract the file above (using tar -xvzf <filename> or a folder extractor) and run this command in the folder

sudo sh sudo sh install_flycapture.sh

4. If there are dependency errors in any code block above, run this command to fix dependencies and try again

sudo apt-get -f install

• the official documentation is here

1. Clone the git repository for the driver into your ~/catkin_ws/src directory

git clone https://github.com/ros-drivers/pointgrey_camera_driver.git

2. Catkin make to add the driver