Building the Flasher cable - nlimper/Mini-AP-v4 GitHub Wiki

Collect all parts

Pogo pins

Insert the 10 pogo pins into the nylon connector. Put the pcb on top.

Solder the pins

Applying flux might help. It's all a bit finicky. Nobody said it would be easy. ;-)

If you own a 3D printer, it might help to print a small jig to hold the pins in place. See this stl file

Glue the cap

Don't use cyanoacrylate glue, as this is too liquid: it creeps into the pogo pins, glueing them stuck. Use a simple cheap hobby glue or wood glue. Let it dry overnight.

Done!

Instructions how to use: Connecting the flasher cable