Connecting the flasher cable - nlimper/Mini-AP-v4 GitHub Wiki

When inserting the cable, pay attention to the orientation. The red wire should match the tiny dot on the connector. On the AP case, the direction of the notch should match. The cable has two different ends, it's most convenient to connect it like this:

The led on the connector (if present) lights up when the tag is powered. The button conntects the TEST pin to ground. At the moment, it doesn't have a real use, but sometimes, when the tag is already powered, it can trigger an automatic flashing of the tag (most of the time, the autoflash should start automatically though).

The extra PCB is designed for debugging and to wire an unknown tag. It gives easy access to all 10 pins.