In TIC-80, it's possible to split the code into multiple files for better project management.

Using require

In a nutshell, you will have a single .lua TIC-80 cartridge where you include the external files with require "relative/path/to/file". You can also require files in required files, but I like to keep all requires in the main cartridge.

For example, you could have main.lua as your main cartridge, and in the same folder, a libraries folder with files math.lua and table.lua inside.

Inside main.lua, you'd call the libraries with

require "libraries/math"
require "libraries/table"

And that's it! After the required lines, every global variable and function in those libraries is at your disposal.

NOTE: With some configurations, TIC-80's Lua hasn't found the required files from the project path automatically. Fix this by adding the following line (with the right path) to main.lua before the requires:

package.path = package.path..";C:/code/myproject/?.lua"

Extra: Accessing cartridges outside TIC-80's own folder

By default, TIC-80 can only access cartridges inside its own folder. I like to have bigger TIC-80 projects in a git repository, so I have them inside my C:\code folder, which has to be accessed in a special way.

Open the folder you want to use as your working directory in command line, and run the command

tic80.exe --fs . --cmd="load main.lua"

--fs . means "use this folder for TIC-80 filesystem", and --cmd="load main.lua" loads the file main.lua when TIC-80 runs.

NOTE: Add TIC-80 to your system path so you can call it like above. Otherwise, you have to replace tic80.exe above with path/to/tic80/tic80.exe.

Combining files back to one

Using multiple files works fine during development, but before exporting, you have to combine files back into one .lua file - this could be tedious, but it can be automated with a script. There are multiple ways to do this; I've used Luacc.

First, you have to install Luarocks, the Lua package manager. (I strongly recommend using WSL if you're on Windows.) Installation on WSL and Ubuntu happens with the command

sudo apt-get install -y luarocks.

Then, install Luacc in luarocks with

luarocks install luacc

Then, you can run luacc with command luacc. Let's continue with the previous example files, and see how they are combined back into one file:

luacc -o game.lua -p 6 -i ./ main "libraries/math" "libraries/table"

Here, -i ./ main means I'm using main.lua as the base file, and -o game.lua denotes the output file. -p 6 means the combined code will be inserted after the sixth line in main.lua (which is two lines after the four mandatory commented lines in a TIC cartridge). If you have more required files, you have to include them all in the script call above! This is why I like to keep all the requires in the main.lua file, so it's easier to keep track of the files.

After running this, you can export the cartridge game.lua normally.

Happy gamedevving! -Borb