TIMER (statement) - mkilgore/QB64pe GitHub Wiki

A TIMER statement enables, turns off or stops timer event trapping. QBasic only uses the base timer, but QB64 can run many.

QB

TIMER {ON|STOP|OFF}

TIMER(number%) {ON|STOP|OFF|FREE}

• number denotes a specific numbered timer event in QB64 only. QB64 can run many timer events at once including the base timer.
• TIMER ON enables event trapping of an ON TIMER (n) statement. While enabled, a check is made after every code statement to see if the specified time has elapsed and the ON TIMER GOSUB (or SUB in QB64) procedure is executed.
• TIMER STOP disables timer event trapping. When an event occurs while stopped, it is remembered. If timer events are turned back on later, any remembered events are immediately executed.
• TIMER OFF turns timer event trapping completely off and no subsequent events are remembered.

• Get a TIMER number from _FREETIMER ONLY except when the base timer(no number or 0) is used. Use specific variables or an array to hold each event number value for later reference.
• If the TIMER number is omitted or 0, the TIMER used is the base timer.
• Specific TIMER events can be enabled, suspended, turned off or freed using TIMER(n) ON, STOP, OFF or FREE.
• TIMER(n) FREE clears a specific timer event when it is no longer needed. The base TIMER or TIMER(0) cannot be freed!

• The TIMER function can be used to find timed intervals down to 1 millisecond(.001) accuracy.
• The _DELAY statement can be used to delay program execution for intervals down to milliseconds.
• _LIMIT can slow down loops to a specified number of frames per second. This can also alleviate a program's CPU usage.

 Clock:
  row = CSRLIN ' Save current print cursor row.
  col = POS ' Save current print cursor column.
  LOCATE 2, 37: PRINT TIME$; ' print current time at top of screen.
  LOCATE row, col ' return to last print cursor position 
 RETURN '' ''

NOTE: SLEEP will be interrupted in QBasic.

• ON TIMER(n), TIMER(function)
• _DELAY, _LIMIT