mdibl_partslist - mesoSPIM/mesoSPIM-hardware-documentation GitHub Wiki
MDIBL mesoSPIM: Partslist
Description
These parts are intended in addition to the mesoSPIM V5 parts. If the setup should be built in this configuration right away, the Hamamatsu Orca camera of the mesoSPIM V5 is not necessary.
Parts
The parts list is preliminary - total cost of non-custom parts is approx. $3.5k
| Quantity | Component | Comment |
|---|---|---|
| 1 | Custom Aluminium Parts | |
| 1 | ZWO Filter wheel 7x2" | |
| 1 | LC6W | 60 mm Cube |
| 2 | BBE2-E02 2" Elliptical Mirror | 1st & 2nd fold mirror (DM1 & DM2) |
| 1 | Tube lens Mount (Edmund 11-149) | Tube lens |
| 1 | Olympus Wide field tube lens | Tube lens |
| 1 | PI/MICOS L-611 Rotation Stage | Turret stage |
| 1 | PI/MICOS C-863 Stage Controller with cables | Turret stage |
| 1 | L-509.2DG (L-509.033111) for the final version or M-111.2DG Linear Stage with cables for the cuvette (prototype) | Turret stage |
| 1 | KCB2EC/M 45 deg mirror mount | for the 2nd fold mirror |
| 1 | XT95B-250 Rail | For the Kinetix holder |
| 1 | XT95P13/M Clamp | For the Kinetix holder |
| 1 | XT95P13/M Clamp | For the Kinetix holder |
| 1 | Newport M-CXL95-120 Carrier | For the Kinetix holder |
| 1 | Newport M-CXL95-80 Carrier | For the Rotation Stage -> check |
| 2 | Newport M-CXL95-50 Carrier | Stoppers |
| 1 | VM05/1M Kinematic Mount | for the 1st fold mirror |
| 1 | 12.7 mm window, 3 mm thick | for the 1st fold mirror |
| 1 | SM2NFM2 F-Mount Adapter | to connect the Kinetix |
| 2 | SM2A24 SM2 -> M42x1 Adapter | for the 1.1x & 4x objectives |
| 1 | M2M32S SM2 -> M32x0.75 Adapt. | for the 12x objective |
| 1 | RS2P/M 50 mm Post plus spacer | 1st fold mirror mount |
| 1 | SM2L03 SM2 Tube | to connect the Kinetix |
| 1 | AM45C/M 45 deg mounting block | 1st fold mirror mount |
| 1 | SM2CP2 Cap | for the empty position in the 60 mm cube |
| 1 | SM2L10 1 Inch SM2 Tube | for the 12x objective |
| 1 | TMA4 | to connect tube lens to 2nd fold mirror |
| 1 | SM2T2 | to connect tube lens to 2nd fold mirror |
| 1 | SM2V05 | for the 12x objective |
| 1 | UBP3/M | to mount the Kinetix |
| 1 | UBP2/M | to mount the cuvette |
| 8 | P30/M 1.5 inch posts | to raise excitation paths |