Custom parts for a mesoSPIM Ultra / MDIBL setup

Overview

A mesoSPIM Ultra is based on the mesoSPIM V5. The CAD files and drawings for mesoSPIM Ultra-specific parts are here

mesoSPIM V5 parts that are NOT required

Please do not fabricate the parts below. All the other V5 parts are required.

Detection path

Image	Description	Quantity	Link to drawing
	V4_Servo-Dynamixel-Adapter-V2: Interfaces the Dynamixel servo with the zoom axis of the MVX-10 microscope- Recommended material: Brass.	1	Link
	MVX-10-Bracket-V5: Allows the MVX-10 macroscope to be mounted on a X95-carrier	1	Link
	XT95P3_X95_Base_plate_mod: Thorlabs XT95P3 base plate, additional countersunk holes for the camera mount are required	1	Link

Additional custom parts for mesoSPIM Ultra

Image	Description	Quantity	Link to drawing	Link to part file
	Kinetix_Adapter_V1: Interfaces the general optomechanics with the Kinetix camera. Recommended material: Al.	1	Link	Link
	PRS-110-Adapterbase_V2: Baseplate to mount a Thorlabs 60 mm cube on a PI PRS-110 rotation stage. Recommended material: Al.	1	Link	Link
	PRS-110-Adaptertop_V2: Top plate to mount a Thorlabs 60 mm cube on a PI PRS-110 rotation stage. Recommended material: Al.	1	Link	Link
	ZWO-to-Tubelens-Adapter-V2: Clamps ZWO 2" filterwheel to tubelens. Recommended material: 3D printed in PLA. Requires thread inserts for M2 screws to allow connection to the ZWO filterwheel and for either 1/4 inch or M6 for the clamping screws	1	Link to stl	Link