2.3 Simulation and Validation - mcgill-robotics/auv-embedded-2026 GitHub Wiki

Simulating Circuits in LTspice

LTspice is a powerful tool for simulating electronic circuits. Here’s how to get started:

1. Create a New Project: Open LTspice and select "New Schematic."
2. Add Components: Use the component library to add resistors, capacitors, and other components.
3. Wire the Components: Connect the components according to your circuit design.
4. Set Simulation Parameters: Choose the type of simulation you want (e.g., transient, AC analysis).
5. Run the Simulation: Click the run button and analyze the results.

Final Validation Steps (advanced)

Before sending your PCB design for manufacturing, check the following:

• Design Rules: Ensure all design rules are met, including trace width and clearance.
• Component Placement: Verify that components are placed correctly for ease of soldering.
• Trace Routing: Ensure traces are properly routed with minimal vias and short lengths.