Procedure to unlock headset and controllers for Oasis - mbucchia/Oasis-Driver-for-Windows-Mixed-Reality GitHub Wiki

If you don't follow these instructions precisely, things WILL NOT WORK.

This procedure is necessary in order to make your headset and motion controllers usable with Oasis.

  • This procedure must be run once on each computer where you will use Oasis.
  • This procedure must be run once with each headset that you will use with Oasis.
  • This procedure must be run after every time you paired a new motion controller that you will use with Oasis.
  • This procedure must be run after upgrading/reinstalling Windows in-place (but Windows Update is OK).
  • This procedure must be run after replacing GPU (but GPU driver reinstall/update is OK).

  1. Exit SteamVR completely.

  2. In the Steam Library, locate the "Oasis Driver for Windows Mixed Reality" application, and press Launch. image

  3. Select "Launch Unlock your headset & controllers for Oasis" and press Play. image When prompted, accept for the program to make changes to your device.

  4. When prompted, disconnect the headset from the USB port, and reconnect it. You do not need to disconnect the HDMI/DisplayPort cable. Press OK to proceed further. image

  5. If/when prompted, turn off your controllers, and turn them back on. Press OK to proceed further. image

  6. You are done! image

Unexpected error while opening MR USB device: 6

This means Mixed Reality Portal (on older Windows 11) is interfering. Please follow these instructions.