{{navigation title|Introduction}} File:Darkplaces lighting visualized.jpg Darkplaces uses a variation of Phong shading as a default lighting model. It is based on '''per-pixel lighting''' - a technique of computing lighting equations for each pixel independently. Renderer contains lots of tricks to allow shading to be fast and flexible. Default model is used on both GL2.0 rendering paths and pre-shader rendering paths (GL1.4), although not all lighting features are possible on pre-shader fixed rendering pipeline.

Lighting are breaked into the passes:

Data used for each light pass:

• Vertex normal : values between vertices of pixel's triangle are interpolated using [http://en.wikipedia.org/wiki/Gouraud_shading Gouraud shading]
• Color Map : base texture (best way to use diffuse texture)
• Normal Map : texture storing additional surface curvature (optionally, alpha storing height)
• Gloss Map : texture used for specular reflection. Contains gloss color (RGB) and optional exponent multiplier (alpha)
• Glow Map : texture's local luminance texture, RGB additive blended texture that entirely ignores shading
• Light Vector : vector of light direction (either calculated for realtime light or got from deluxemap lightmap component)
• Eye Vector : being computed for each pixel, this vector is used for specular calculation.

This gallery illustrates how lighting features changes the quality: File:Darkplaces lightexample flat.jpg|Attenuation-only 'flat' lighting File:Darkplaces lightexample shadows.jpg|+ Shadows File:Darkplaces lightexample shading.jpg|+ Shading File:Darkplaces lightexample specular.jpg|+ Specular File:Darkplaces lightexample bouncegrid.jpg|+ Photonmapping

==Attenuation== Dynamic lights in Darkplaces engine are omnidirectional, using linear falloff.

{{design|Spotlights and projected dynamic lights could be simulated with cubemap filters.}}

Static lights can have a variety of options for controlling attenuation (this options is only used in Q3map2 LIGHT stage):

• target and radius : simulating spot lights with cone falloff
• _sun flag - infinite distance lights, constant direction
• _deviance and _samples - non-point lights

==Shading== Shading is done by using dotproduct of light vector and pixel normal. Some ambient lighting could be added for a more smooth result.

{{important|lightmap by default dont have shading since they lack light direction data. In order to make lightmaps to use whole shading cycle, map compiler tool should be configured to make deluxemaps (second lightmap set which store per-pixel light directions)}}

Rough shading algorithm explanation: // Surface's vertex normals are always supplied, texture normalmap is forced to default RGB '0.5 0.5 1' (same as surface normal) if not found PixelNormal = Surface.VertexNormal + Texture.NormalMap; // LightSource are only defined for dynamic lights // LightmapGlobal.AmbientLight is r_ambient cvar // Material.AmbientLight is set by '''dprtlightambient''' material keyword and only applicable to dynamic lights AmbientLight = LightSource.AmbientLight + LightmapGlobal.AmbientLight + Material.AmbientLight; if (LightSource) DiffuseLight = LightSource.DiffuseLight; else DiffuseLight = 1; // Static lighting Shading = dotproduct(PixelNormal, LightVector) * DiffuseLight + AmbientLight;

{{cvar|r_shadow_usenormalmap|Enables use of normalmap texture for lighting. Setting this to to will make only vertex normals to be used.}} {{cvar|r_shadow_bumpscale_basetexture|Forces normalmap to be automatically calculated from color texture by using it as bumpmap, value controls magnitude. Requires r_restart.}} {{cvar|r_shadow_bumpscale_bumpmap|Normalmap can be supplied as _bump texture, in this case engine converts it to normalmap on load, values is magnitude. Requires r_restart.}} {{cvar|r_glsl_deluxemapping|Use full shading on lightmapped surfaces. A value of 2 forces deluxemap shading even if surface have no one.}} {{cvar|r_ambient|Amount of ambient light to be added to all surfaces. Makes level brighter.}}

{{grammar}} ==Specular== Specular (or gloss) is the mirror-like reflection of light from a surface, in which light from a single incoming direction (a ray) is reflected into a single outgoing direction. Many well-known surfaces (metal, plastic, wood) is recognized by specularity they have.

Specular offers two parameters to mess with:

• Specular multiplier: intensity of specular effect, this could be very high or very low. It is multiplier to gloss texture.
• Specular exponent: how 'sharp' gloss is, high values are used to make texture to be plastic-like, while lower ones are suitable for matte surfaces. Basically its just a modifier to gloss texture's alpha channel (which is forced to 1 if not supplied).

Gloss may be forced (see r_shadow_gloss 2 below), in this case texture, if missing its own gloss map, gets a white image for gloss map and parameters from a cvars.

Rough specular algorithm explanation: // Global.GlossIntensity is controlled by r_shadow_glossintensity or r_shadow_glossintensity2 if gloss is forced // Material.GlossIntensityMod is set by '''dpglossintensitymod''' material keyword SpecularColor = Texture.GlossMap * Global.GlossIntensity * Material.GlossIntensityMod; // Global.GlossExponent is controlled by r_shadow_glossexponent or r_shadow_glossexponent2 if gloss is forced // Material.GlossExponentModis set by '''dpglossexponentmod''' material keyword if (Texture.GlossMap.Alpha) SpecularExponent = Texture.GlossMap.Alpha * Global.GlossExponent * Material.GlossExponentMod; else SpecularExponent = Global.GlossExponent * Material.GlossExponentMod; // this is rough specular calculation // optionally, engine can use real reflection map to get specular normal (see r_shadow_glossexact below) SpecularNormal = PixelNormal + EyeVector; Specular = SpecularColor * power(dotproduct(PixelNormal, SpecularNormal), SpecularExponent) {{important|Forced gloss (gloss 2) which is used if texture's gloss map is missed, are only used on outside map to simulate wet surfaces effect.}}

{{cvar|r_shadow_glossintensity|Global intensity for specular calculations, default is 1.}} {{cvar|r_shadow_gloss2intensity|Global intensity for specular calculations applied for forced-gloss surfaces, default is 1.}} {{cvar|r_shadow_glossexponent|Global gloss exponent used as a base in shader calculations.}} {{cvar|r_shadow_gloss2exponent|Same one used for forced-gloss surfaces.}} {{cvar|r_shadow_glossexact|Use real reflection math for gloss calculation. This is slower and little more correct.}}

==Shadows== Shadows are most valuable part of realtime lighting. They are increasing scene depth so it looks more realistic.

{{important|Shadows are quite complex render task, many lights casting many shadows may decrease rendering speed significantly. Map designer should plan his map with this limitation in mind - there should be no situation of many lights being seen from a certain point, or user will experience a game slowdown.}}

Darkplaces supports two realtime shadowing techniques: stencil shadow volumes and shadow mapping.

===Stencil shadow volumes=== [http://en.wikipedia.org/wiki/Shadow_volume Stencil shadow volumes] is a base shadow rendering method in Darkplaces.

This technique is well known for it's shadows not having penumbra. Many other restrictions (high fillrate hit, bad scalability) make this method to be used only on a few games (such as Doom 3).

{{cvar|r_shadow_polygonfactor|how much to enlarge shadow volume polygons when rendering (should be 0!)}} {{cvar|r_shadow_polygonoffset|how much to push shadow volumes into the distance when rendering, to reduce chances of zfighting artifacts (should not be less than 0)}} {{cvar|r_shadow_frontsidecasting|whether to cast shadows from illuminated triangles (front side of model) or unlit triangles (back side of model)}} {{cvar|r_showshadows|Show areas covered by shadow volumes. Useful for finding out why some areas of the map render slowly (bright blue = lots of passes, slow). Only matters if using shadow volumes.}}

===Shadow mapping=== In 2010 darkplaces got [http://en.wikipedia.org/wiki/Shadow_mapping shadow mapping] implemented by [http://sauerbraten.org/ Eihrul].

Shadowmapping have a number of advantages over shadow volume rendering and is considered to replace it:

• Penumbra
• Fast to render (especially on complex area maps)
• Takes less CPU time (as construction of shadow volumes is not required)
• Distance-based LOD (far lights rendered with lower shadowmap resolution)

{{hidden begin|Console variables}} {{cvar|r_shadow_shadowmapping|Enables shadow mapping}} {{cvar|r_shadow_shadowmapping|Shadowmap bias parameter (this is multiplied by nearclip * 1024 / lodsize}} {{cvar|r_shadow_shadowmapping_bordersize|Shadowmap size bias for filtering}} {{cvar|r_shadow_shadowmapping_depthbits|Requested minimum shadowmap texture depth bits, could be 16 or 24}} {{cvar|r_shadow_shadowmapping_filterquality|Shadowmap filter modes: -1 = auto-select, 0 = no filtering, 1 = bilinear, 2 = bilinear 2x2 blur (fast), 3 = 3x3 blur (moderate), 4 = 4x4 blur (slow)}} {{cvar|r_shadow_shadowmapping_maxsize|Shadowmap size limit}} {{cvar|r_shadow_shadowmapping_minsize|Shadowmap size limit}} {{cvar|r_shadow_shadowmapping_nearclip|Shadowmap near clip in world units. Increasing this will make shadow rendering to be more precise (as more bits goes to middle range), at the cost of the small non-shadowed zone around light}} {{cvar|r_shadow_shadowmapping_polygonfactor|Slope-dependent shadow mapping bias}} {{cvar|r_shadow_shadowmapping_polygonoffset|Constant shadow mapping bias}} {{cvar|r_shadow_shadowmapping_precision|Makes shadowmaps have a maximum resolution of this number of pixels per light source radius unit such that, for example, at precision 0.5 a light with radius 200 will have a maximum resolution of 100 pixels}} {{cvar|r_shadow_shadowmapping_useshadowsampler|whether to use sampler2DShadow if available}} {{cvar|r_shadow_shadowmapping_vsdct|enables use of virtual shadow depth cube texture}} {{cvar|r_usedepthtextures|Use depth texture instead of depth renderbuffer where possible, uses less video memory but may render slower (or faster) depending on hardwaree.}} {{bug|r_usedepthtextures causing strong precision drop, which leads to splotches around shadow edges}} {{hidden end}}

==Other light models== Darkplaces includes other lighting models which are used eventually:

'''Fake light''' :A developer-only mode which is forced on non-lit maps (ones which was compiled and didnt get LIGHT phase). This is infinite realtime light that is cast from eye position. '''Sun light''' :A similar to fake light technique to render sun lighting on outdoor surfaces, Used for sunset and sun dawn effects on outdoor maps. '''Cel shading''' :Altered shading for default lighting model. :{{cvar|r_celshading|Enable cel shading (alternate diffuse math)}} '''Lightmap''' :Lightmap with no deluxemap applied (just an old lightmap with no per-pixel lighting effects) '''Fullbright''' :No lighting applied (all textures at their full brightness)

{{navigation footer|Special effects}} {{finished}}