Screen('ConfigureDisplay')

Psychtoolbox › Screen.{mex*,dll} subfunction

Query or change 'setting' for display output 'outputId' of screen
'screenNumber'.
This function allows you to configure the different attached display outputs of
a virtual screen.
Optionally sets new settings for that output.
Possible values for subfunction parameter 'setting':
'Brightness': Return or set brightness of an attached display device. Many
displays and systems don't support this function. brightness values are in the
range 0.0 to 1.0 from darkest to brightest. Returns old brightness setting.
'NumberOutputs': Return number of active separate display outputs for given
screen 'screenNumber'.
'Capture': Capture output 'outputId' of a screen 'screenNumber' for exclusive
use by Psychtoolbox.
'Release': Release output 'outputId' of a screen 'screenNumber' from exclusive
use by Psychtoolbox.
Please note that 'Capture' and 'Release' are automatically applied to a display
output as appropriate whenever a fullscreen onscreen window is opened or closed
on a display. You usually don't need to call these functions yourself, in fact,
you even shouldn't call them yourself usually, as wrong use of the functions can
cause graphics malfunctions or even a freeze of the display or GUI, forcing you
to kill Matlab or Octave as a last resort to regain control over your displays.
The main purpose of these functions is to temporarily block all graphics
operations or display updates on displays that are not used for visual
stimulation, ie., not covered by fullscreen onscreen windows. This prevents
other running applications from interfering with your experiment script by
preventing them to take up valuable resources on the graphics card. Display
capture is not supported on all operating systems in all modes of operation. If
the functions get called on an unsupported configuration, they silently return
and simply do nothing.

'Dithering' Control digital display dithering on supported GPUs. This is
currently only supported on AMD graphics cards under Linux and OSX.
'screenNumber' will apply the setting on all video outputs connected to screen
'screenNumber'. The next setting is the 'ditherEnable' flag: A value of zero
will disable dithering. A non-zero value will reenable dithering if it was
previous disabled by Psychtoolbox. If dithering wasn't disabled, then instead
the given value will be written into the dither control register to modify
dithering settings. The meaning of specific values is GPU and vendor specific
and only useful for experts.
Example call: Screen('ConfigureDisplay', 'Dithering', screenNumber,
ditherEnable);

'Scanout': Retrieve or set scanout parameters for a given output 'outputId' of
screen 'screenNumber'. Returns a struct 'oldSettings' with the current settings
for that output. Only supported on Linux.
It returns and accepts the following optional parameters:

* Display resolution "newwidth" x "newheight", and nominal refresh rate "newHz".
* Panning ('newX','newY') - The location of the top-left corner of the display
in the framebuffer.
Readonly properties:

* Display size "displayWidthMM" x "displayHeightMM" in millimeters, as reported
by attached display.
* Video output name "name".

Providing invalid or incompatible settings will raise an error.

###See also: Screen('Resolutions'), Screen('Resolution');