Draw Cut with multiple Gaps

TS_CUTWITHGAPS

Creates a cut line / arc with the specified number of gaps.

This tool creates ARC and LINE entities.

 

---

Overview

Figure 1: Draw Cut with Gaps Dialog

 

Setting	Description
Number of gaps per line / arc	Use the drop-down list to select the number of required gaps. The available options are 1 to 10. You can also type in a new value.
Width of gap	Use the drop-down list to select the width of the gaps. The available options are 1 to 10. You can also type in a new value.
Use automatic mode	Set this option if you would like to make use of the automatic mode. Read the following for more information.
Start 1 - 6 gaps up to	Use the remaining settings to configure how the automatic mode will work. You can predetermine how many gaps you would like inserted for a given length.

 

---

Previous Topic	Next Topic