The base station hosts an onboard computer titled the LattePanda Delta 3. It manages door logic, processes sensor data in real time, and controls the status of the relays. For more details on the relays, see 2023-2024.

Login

Username : argworkstation
Password : argworkstation

Pinout Usage

The following displays the full pinout of the LattePanda Delta3 alongside the pins that are being used (colored in red) and for what purpose.

Auto Start on Power

Currently, the LattePanda is configured in the BIOS to turn on automatically when it gets power. It is able to do this through the RTC battery (CR927 3V). If that battery is drained, the LattePanda will not auto start when it gets power. According to the Official LattePanda Delta3 website, the battery is supposed to charge up when the LattePanda has power, but the battery was completely dead halfway through our senior project. We bought about 10 extra batteries in case this happens again, so the battery can be replaced. They should be located in one of the amazon boxes at our desk in the senior project room. Be careful not to flick off any components on the LattePanda PCB when replacing the battery.

Note: See the LattePanda Delta3 Official Website for additional help.