Storage Units - TinyModularThings/IC2Classic GitHub Wiki

Storage Units:
These are your Devices to store EU in small or massive amounts.
By placing them down their output will face directly at you based on your facing and angle.
The can accept power from any side but the front which is markt with a dot.
They accept as much power as they can output per packet.

Name	Tier	Capacity, EU	Voltage, EU
Batbox	LV	40,000	32
MFE (Multi-functional energy storage)	MV	600,000	128
MFSU (Multi-funct. storage unit)	HV	10,000,000	512
Plasma Energy Storage Unit	LuV	1,000,000,000	32,768
Battery station	var.	variable	var.
Creative Storage	var.	variable	var.

Battery Station is special storage that works as container for battery-items.
There are 3 modes to this machine which is represented by a cable.

• Charging Bench:
  Which makes the Battery Station only accept power.
• Battery Station Mode:
  Which makes the Battery Station only provide power.
• Batbox Mode:
  Which makes the Battery Station accept & provide power.

While in a Emitting Mode the Battery Station has also 3 Emitting Modes.
But be carefull when changing those since their Effect will change instantly.

• "Low Energy Mode":
  Which uses the first non-empty Battery to provide Power.
• "High Energy Mode":
  Which combines all batteries and their tiers to create a poweroutput based of their combined power. Which is calculated properly. (4 Of the same tier = 1 of the next upper tier).
• "Packet Energy Mode":
  Which will emit Power for each battery and their respective Tier.

When emitting Power in normal or Packet mode the station will Emit power based of the Batteries EnergyTier.
Tier 1: 32EU, Tier 2: 128EU and so on.

The Gui tells you also how long it would take to charge/discharge the full station.
This can get to about 90% accuracy when having a Fluctiating Power System with instable input or output.