The ipython directive is a stateful ipython shell for embedding in sphinx documents. It knows about standard ipython prompts, and extracts the input and output lines. These prompts will be renumbered starting at 1. The inputs will be fed to an embedded ipython interpreter and the outputs from that interpreter will be inserted as well. For example, code blocks like the following:

.. ipython::

   In [136]: x = 2

   In [137]: x**3
   Out[137]: 8

will be rendered as

.. ipython::

   In [136]: x = 2

   In [137]: x**3
   Out[137]: 8

The state from previous sessions is stored, and standard error is trapped. At doc build time, ipython's output and std err will be inserted, and prompts will be renumbered. So the prompt below should be renumbered in the rendered docs, and pick up where the block above left off.

.. ipython::

  In [138]: z = x*3   # x is recalled from previous block

  In [139]: z
  Out[139]: 6

  In [140]: print z
  --------> print(z)
  6

  In [141]: q = z[)   # this is a syntax error -- we trap ipy exceptions
  ------------------------------------------------------------
     File "<ipython console>", line 1
       q = z[)   # this is a syntax error -- we trap ipy exceptions
             ^
  SyntaxError: invalid syntax

The embedded interpreter supports some limited markup. For example, you can put comments in your ipython sessions, which are reported verbatim. There are some handy "pseudo-decorators" that let you doctest the output. The inputs are fed to an embedded ipython session and the outputs from the ipython session are inserted into your doc. If the output in your doc and in the ipython session don't match on a doctest assertion, an error will be

.. ipython::

   In [1]: x = 'hello world'

   # this will raise an error if the ipython output is different
   @doctest
   In [2]: x.upper()
   Out[2]: 'HELLO WORLD'

   # some readline features cannot be supported, so we allow
   # "verbatim" blocks, which are dumped in verbatim except prompts
   # are continuously numbered
   @verbatim
   In [3]: x.st<TAB>
   x.startswith  x.strip

Multi-line input is supported.

.. ipython::

   In [130]: url = 'http://ichart.finance.yahoo.com/table.csv?s=CROX\
      .....: &d=9&e=22&f=2009&g=d&a=1&br=8&c=2006&ignore=.csv'

   In [131]: print url.split('&')
   --------> print(url.split('&'))
   ['http://ichart.finance.yahoo.com/table.csv?s=CROX', 'd=9', 'e=22',

You can do doctesting on multi-line output as well. Just be careful when using non-deterministic inputs like random numbers in the ipython directive, because your inputs are ruin through a live interpreter, so if you are doctesting random output you will get an error. Here we "seed" the random number generator for deterministic output, and we suppress the seed line so it doesn't show up in the rendered output

.. ipython::

   In [133]: import numpy.random

   @suppress
   In [134]: numpy.random.seed(2358)

   @doctest
   In [135]: numpy.random.rand(10,2)
   Out[135]:
   array([[ 0.64524308,  0.59943846],
          [ 0.47102322,  0.8715456 ],
          [ 0.29370834,  0.74776844],
          [ 0.99539577,  0.1313423 ],
          [ 0.16250302,  0.21103583],
          [ 0.81626524,  0.1312433 ],
          [ 0.67338089,  0.72302393],
          [ 0.7566368 ,  0.07033696],
          [ 0.22591016,  0.77731835],
          [ 0.0072729 ,  0.34273127]])

Another demonstration of multi-line input and output

.. ipython::

   In [106]: print x
   --------> print(x)
   jdh

   In [109]: for i in range(10):
      .....:     print i
      .....:
      .....:
   0
   1
   2
   3
   4
   5
   6
   7
   8
   9

Most of the "pseudo-decorators" can be used an options to ipython mode. For example, to setup matplotlib pylab but suppress the output, you can do. When using the matplotlib use directive, it should occur before any import of pylab. This will not show up in the rendered docs, but the commands will be executed in the embedded interpreter and subsequent line numbers will be incremented to reflect the inputs:

.. ipython::
   :suppress:

   In [144]: from pylab import *

   In [145]: ion()

.. ipython::
   :suppress:

   In [144]: from pylab import *

   In [145]: ion()

Likewise, you can set :doctest: or :verbatim: to apply these settings to the entire block. For example,

.. ipython::
   :verbatim:

   In [9]: cd mpl/examples/
   /home/jdhunter/mpl/examples

   In [10]: pwd
   Out[10]: '/home/jdhunter/mpl/examples'


   In [14]: cd mpl/examples/<TAB>
   mpl/examples/animation/        mpl/examples/misc/
   mpl/examples/api/              mpl/examples/mplot3d/
   mpl/examples/axes_grid/        mpl/examples/pylab_examples/
   mpl/examples/event_handling/   mpl/examples/widgets

   In [14]: cd mpl/examples/widgets/
   /home/msierig/mpl/examples/widgets

   In [15]: !wc *
       2    12    77 README.txt
      40    97   884 buttons.py
      26    90   712 check_buttons.py
      19    52   416 cursor.py
     180   404  4882 menu.py
      16    45   337 multicursor.py
      36   106   916 radio_buttons.py
      48   226  2082 rectangle_selector.py
      43   118  1063 slider_demo.py
      40   124  1088 span_selector.py
     450  1274 12457 total

You can create one or more pyplot plots and insert them with the @savefig decorator.

.. ipython::

   @savefig plot_simple.png width=4in
   In [151]: plot([1,2,3]);

   # use a semicolon to suppress the output
   @savefig hist_simple.png width=4in
   In [151]: hist(np.random.randn(10000), 100);

In a subsequent session, we can update the current figure with some text, and then resave

.. ipython::


   In [151]: ylabel('number')

   In [152]: title('normal distribution')

   @savefig hist_with_text.png width=4in
   In [153]: grid(True)

You can also have function definitions included in the source.

.. ipython::

   In [3]: def square(x):
      ...:     """
      ...:     An overcomplicated square function as an example.
      ...:     """
      ...:     if x < 0:
      ...:         x = abs(x)
      ...:     y = x * x
      ...:     return y
      ...:

Then call it from a subsequent section.

.. ipython::

   In [4]: square(3)
   Out [4]: 9

   In [5]: square(-2)
   Out [5]: 4

Pure python code is supported by the optional argument python. In this pure python syntax you do not include the output from the python interpreter. The following markup:

.. ipython:: python

   foo = 'bar'
   print foo
   foo = 2
   foo**2

Renders as

.. ipython:: python

   foo = 'bar'
   print foo
   foo = 2
   foo**2

We can even plot from python, using the savefig decorator, as well as, suppress output with a semicolon

.. ipython:: python

   @savefig plot_simple_python.png width=4in
   plot([1,2,3]);

Similarly, std err is inserted

.. ipython:: python

   foo = 'bar'
   foo[)

Comments are handled and state is preserved

.. ipython:: python

   # comments are handled
   print foo

If you don't see the next code block then the options work.

.. ipython:: python
   :suppress:

   ioff()
   ion()

Multi-line input is handled.

.. ipython:: python

   line = 'Multi\
           line &\
           support &\
           works'
   print line.split('&')

Functions definitions are correctly parsed

.. ipython:: python

   def square(x):
       """
       An overcomplicated square function as an example.
       """
       if x < 0:
           x = abs(x)
       y = x * x
       return y

And persist across sessions

.. ipython:: python

   print square(3)
   print square(-2)

Pretty much anything you can do with the ipython code, you can do with with a simple python script. Obviously, though it doesn't make sense to use the doctest option.

Here are the supported decorators, and any optional arguments they take. Some of the decorators can be used as options to the entire block (eg verbatim and suppress), and some only apply to the line just below them (eg savefig).

@suppress

execute the ipython input block, but suppress the input and output block from the rendered output. Also, can be applied to the entire ..ipython block as a directive option with :suppress:.

@verbatim

insert the input and output block in verbatim, but auto-increment the line numbers. Internally, the interpreter will be fed an empty string, so it is a no-op that keeps line numbering consistent. Also, can be applied to the entire ..ipython block as a directive option with :verbatim:.

@savefig OUTFILE [IMAGE_OPTIONS]

save the figure to the static directory and insert it into the document, possibly binding it into a minipage and/or putting code/figure label/references to associate the code and the figure. Takes args to pass to the image directive (scale, width, etc can be kwargs); see image options for details.

@doctest

Compare the pasted in output in the ipython block with the output generated at doc build time, and raise errors if they don’t match. Also, can be applied to the entire ..ipython block as a directive option with :doctest:.

ipython_savefig_dir

The directory in which to save the figures. This is relative to the Sphinx source directory. The default is html_static_path.

ipython_rgxin

The compiled regular expression to denote the start of IPython input lines. The default is re.compile('In [(d+)]:s?(.*)s*'). You shouldn't need to change this.

ipython_rgxout

The compiled regular expression to denote the start of IPython output lines. The default is re.compile('Out[(d+)]:s?(.*)s*'). You shouldn't need to change this.

ipython_promptin

The string to represent the IPython input prompt in the generated ReST. The default is 'In [%d]:'. This expects that the line numbers are used in the prompt.

ipython_promptout

The string to represent the IPython prompt in the generated ReST. The default is 'Out [%d]:'. This expects that the line numbers are used in the prompt.