The parameters that are useful for a SQL DB Install are given below. The parameters cover both the basic install and the provisioning that can be performed by SQL FineBuild.
If you are happy that the default value for a given parameter is right for your organisation then you do not need to provide that parameter. Where relevant, some parameters appear in multiple categories.
When you run SQL FineBuild you should always provide an /AdminPassword: parameter giving your own password in order to log on automatically after a reboot.
The parameters are divided into the following sections. You should always look at the Basic Install parameters, and then look at other parameters you need to provision specific items:
Parameters that are most commonly used with a SQL DB Install
Parameter
Default
Comment
/SetupSQLDB:
No
Set to YES to install SQL Database Engine
/Edition:
EVAL
Edition of SQL Server to be installed
/Instance:
MSSQLSERVER
Name of SQL Instance to install
/saPwd:
(none)
Password for the sa account
/SecurityMode:
(none)
Security Mode of SQL Server
/SqlSvcAccount:
(none)
Name of SQL DB Service Account
/SqlSvcPassword:
(none)
Password for SQL DB Service Account
You should also consider the Vol Parameters
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/EnableRANU:
1
Enable Run as Normal User (SQL Express Edition only)
/ErrorReporting:
0
Automatically report errors back to Microsoft
/Features:
(none)
Additional Features to include in the FineBuild SQL Server Install
/Options:
(none) Additional Options to include in the FineBuild SQL Server Install
/PID:
(discovered)
PID for SQL Server installation. Discovered from Install Media, except for SQL2005
/SQMReporting:
0
(SQL 2014 and below) Report SQL Feature usage to Microsoft
Index
Parameter
Default
Comment
/SetupCmdShell:
No
Setup xp_cmdshell Proxy Account
/CmdShellAccount:
(none)
Name of xp_Cmdshell Proxy Account
/CmdShellPassword:
(none)
Password for xp_Cmdshell Proxy Account
/GroupDBA:
(none)
Name of DBA sysadmin group
/GroupDBANonSA:
(none)
Name of DBA non sysadmin group
/KeyPassword:
(saPwd)
Password for securing Database Key Files, etc
/saName:
sa
New name of sa account
/saPwd:
(none)
Password for the sa account
/SecurityMode:
(none)
Security Mode of SQL Server
/SQLOperator:
"SQL Alerts"
Default Operator name for Alert notification
/SQLSysadminAccounts:
(none)
Additional SQL sysadmin Accounts
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/SetupOldAccounts:
Yes
Configure Old Accounts to remove any redundant accounts
/SetupSAAccounts:
Yes
Configure Sysadmin accounts
/SetupSAPassword:
Yes
Configure sa Account name and password
/SetupStdAccounts:
Yes
Configure Standard Accounts for SQL Server
/NTAuthAccount:
"Network Service"
(Windows 2008 R2 and below) Default Service Account name
/RoleDBANonSA:
DBA_NonAdmin
DBA Non-Sysadmin System Role name
The capabilities of following parameters have been superceeded by AutoConfig Processing :
Parameter
Default
Comment
/NumLogins:
20
Maximum number of Additional Accounts to process
/UserLoginnn :
(none)
Additional SQL logins (nn is 01 to NumLogins )
/UserPasswordnn :
(none)
Passwords for Additional SQL logins (nn is 01 to NumLogins: )
/WinLoginnn :
(none)
Additional Windows logins (nn is 01 to NumLogins )
Index
Parameters that can be added to the basic install in order to provision for Always On. These parameters are only valid if you are installing on to a Windows Cluster.
Parameter
Default
Comment
/SetupAlwaysOn:
No
Setup Always On for a SQL Server Always On Install
/SetupAOAlias:
(none)
Setup DNS Alias for Availability Group
/SetupAODB:
No
Add existing databases to Availability Group
/SetupAOProcs:
(none)
Install procedures for managing Availability Groups
/AGName:
(none)
Name of Availability Group (non-clustered only)
/AGDagName:
(none)
Name of Distributed Availability Group
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/ClusterNameAO:
(calculated)
Name of Always On Cluster
/ClusAOSuffix:
AO
Suffix added to Windows Cluster Name to form the Always On Cluster Name
/ClusAOIPSuffix:
(calculated)
TCP final octet for AO Cluster address
/EncryptAO:
AES
Encryption algorithm for Always On communications
/TCPPortAO:
5022
Port for Always On communication
Index
Buffer Pool Extension Provisioning Parameters for SQL2019 and above:
Parameter
Default
Comment
/SetMemOptHybridBP:
(none)
(SQL 2019 and above) Set to ON to use Memory Optimised Hybrid Bufferpool hardware
Parameters for old style Buffer Pool Extension:
Parameter
Default
Comment
/SetupBPE:
No
Configure Buffer Pool Extension
/BPEFile:
"100 GB"
Size of BPE File
/VolBPE:
(VolTemp)
Volume to host BPE Volume
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/LabBPE:
BPE
Volume Label to be applied to BPE Volume
Index
Parameters that can be added to the basic install in order to provision a SQL Server Cluster. These parameters are only valid if you are installing on to a Windows Cluster.
Cluster names can either be generated automatically or supplied by you. See Cluster Naming Convention for more details of how this is done.
The following parameters are most commonly used with a SQL Server Cluster Install. You should also see Distributed Transaction Coordinator Provisioning
Parameter
Default
Comment
/SetupSQLDBCluster:
No
Set to YES to install a SQL Server DB Engine Cluster
/SetupAPCluster:
No
Enforce Active/Passive cluster configuration
The following parameters are mandatory for SQL2005 or for installing on Windows 2003, but are not required for more recent versions:
Parameter
Default
Comment
/AgtClusterGroup:
(none)
Local Group holding SQL Agent Service Accounts
/SQLClusterGroup:
(none)
Local Group holding SQL DB Service Accounts
/FTSClusterGroup:
(none)
Name of FTS Cluster Group
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/AgtDomainGroup:
(none)
(SQL2008 and above) Local Group holding SQL Agent Service Accounts (Optional)
/ClusterNameSQL:
(calculated)
Name of SQL DB Cluster
/ClusterNameAO:
(calculated)
Name of Always On Cluster
/ClusterNameFS:
(calculated)
Name of File Server Cluster
/ClusAOIPSuffix:
(calculated)
TCP final octet for AO Cluster address
/ClusDBIPSuffix:
(calculated)
TCP final octet for SQL DB Cluster address
/ClusterTCP:
IPv4
Default type of IP address to use for SQL DB Cluster
/ClusAOSuffix:
AO
Suffix added to Windows Cluster Name to form the Always On Cluster Name
/ClusDBSuffix:
DB
Suffix added to Windows Cluster Name to form the DB Engine Cluster Name
/ClusWinSuffix:
(none)
Suffix removed from Windows Cluster Name before forming remaining cluster names
/ClusStorage:
Available Storage
Name of cluster Available Storage group
/ConfirmIPDependencyChange:
0
Prompt for IP Dependency Change for Distributed Clusters
/NetNameSource:
CLUSTER
CLUSTER: Rename Server adaptors to match names used in the Cluster
/PreferredOwner:
(none)
Preferred Server to own Cluster Roles
/SetupClusterShares:
No
Setup Shares for Cluster Volumes
/SQLDomainGroup:
(none)
(SQL2008 and above) Local Group holding SQL DB Service Accounts (Optional)
Index
Community Components Provisioning
Parameters that can install and configure Communuity Components
Older components not suitable for SQL2014 and above are listed at Legacy Tools
Index
Database Mail Provisioning Parameters that can be added to the basic install in order to provision for Database Mail.
Parameter
Default
Comment
/SetupDBMail:
Yes
Configure Database Mail
/DBMailProfile:
"Public DB Mail"
Name of default public DB Mail profile
/DBAEmail:
(none)
Email Address for DBA Alert Messages
/MailServer:
(none)
Mail Server Name or Alias
/SQLEmail:
(DBAEmail)
DBMail public Email Address
Index
Database Maintenance Provisioning
Parameter
Default
Comment
/SetupDBAManagement:
Yes
Setup basic DBA management routines
/SetupDBOpts:
Yes
Setup FineBuild Standard Database Options
/SetupGenMaint:
Yes
Configure Generic Maintenance Processes
/DBAEmail:
(none)
Email Address for DBA Alert Messages
/SetBackupStart:
"21:00:00"
Time Database Full Backups will start
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/DBA_DB:
DBA_Data
Database name to hold DBA routines
/DBOwner:
DBOwner
Name of default Database Owner account
/JobCategory:
Database Maintenance
Name of Job Category for Database Maintenance jobs
/SetBackupRetain:
23
Number of hours a Full or Differential Backup will be retained
/SetBackupLogFreq:
60
Number of minutes between Database Log Backups
/SetBackupLogRetain:
24
Number of hours a Log Backup will be retained
Index
Data Quality and Master Data Services Provisioning
Parameter
Default
Comment
/SetupDQ:
(none)
Setup Data Quality Services
/SetupDQC:
(Yes
Setup Data Quality Client
/SetupMDS:
(none)
Setup Master Data Services (MDS)
/SetupMDSC:
(none)
Install Master Data Services Client
/DQPassword:
(saPwd)
Password for Data Quality Services
/MDSAccount:
(none)
Name of MDS Account
/MDSPassword:
(none)
Password for MDS Account
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/MDSDB:
MDSData
Name of Master Data Services database
/MDSPort:
5091
Port for Master Data Services Web Site
/MSDSite:
MDS
Name of MDS Web Site
Index
Disk Volume and Folder Provisioning Depending on the SQL Server version, the /Vol... parameters can specify either a Drive Letter, a Share Name, a File URI, or a CSV path
Parameter
Default
Comment
/VolData:
(System Drive)
Volume to host SQL DB data files
/VolBackup:
(VolData)
Volume to host SQL DB backup files
/VolDataFS:
(VolData)
Volume to host SQL DB Filestream files
/VolDataFT:
(VolData)
Volume to host Full Text files
/VolTemp:
(VolData)
Volume to host tempdb data files
/VolLog:
(VolData)
Volume to host SQL DB log files
/VolLogTemp:
(VolLog)
Volume to host tempdb log file
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/DirDBA:
"DBA Files"
Folder name to hold DBA files
/DirSQL:
MSSQL
Folder name to hold SQL Server database files, etc
/LabBackup:
"Backup"
Volume Label to be applied to Backup Volume
/LabData:
"SQL Data"
Volume Label to be applied to SQL Data Volume
/LabDataFS:
"FS Data"
Volume Label to be applied to SQL FileStream Volume
/LabDataFT:
"FT Data"
Volume Label to be applied to SQL Full Text Volume
/LabDBA:
"DBA Misc"
Volume Label to be applied to DBA Files Volume
/LabLog:
"SQL Log"
Volume Label to be applied to SQL Log Volume
/LabLogTemp:
"Temp Log"
Volume Label to be applied to SQL tempdb Log Volume
/LabSysDB:
"SQL SysDB"
Volume Label to be applied to SQL System Databases Volume
/LabTemp:
"SQL Temp"
Volume Label to be applied to SQL tempdb data Volume
/PathSQLSP:
"..\Service Packs"
Path to Service Packs folder
/SQLProgDir:
"Microsoft SQL Server"
High-level folder name for SQL Server programs
Index
Distributed Replay Provisioning Parameters to provision Distributed Replay.
For SQL2008 R2 and below these functions are provided via Install RML Utilities .
Parameter
Default
Comment
/SetupDRUCLT:
Yes
Setup Distributed Replay Client
/SetupDRUCtlr:
(none)
Setup Distributed Replay Controller
/CltSvcAccount:
(none)
Name of Distributed Replay Client Service Account
/CltSvcPassword:
(none)
Password for Distributed Replay Client Service Account
/CtlrSvcAccount:
(none)
Name of Distributed Replay Controller Service Account
/CtlrSvcPassword:
(none)
Password for Distributed Replay Controller Service Account
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/CltStartupType:
Manual
Distributed Replay Controller Service startup type
/CtlrStartupType:
Manual
Distributed Replay Controller Service startup type
Index
Distributed Transaction Coordinator Provisioning Distributed Transaction Coordinator items are normally only relevant for a Cluster Install
Parameter
Default
Comment
/SetupDTCCID:
Yes
Setup new CID for MSDTC
/SetupDTCCluster:
(none)
Setup MSDTC Cluster
/SetupDTCNetAccess:
No
Setup MSDTC Network Access
/VolDTC:
(System Drive)
Volume to host MSDTC data
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/ClusDTCIPSuffix:
(calculated)
TCP final octet for DTC Cluster address
/ClusDTCSuffix:
TC
Suffix added to Windows Cluster Name to form the MSDTC Cluster Name
/DTCMultiInstance:
Yes
Create a dedicated MSDTC Cluster for each SQL DB Instance Cluster
/LabDTC:
MSDTC
Volume Label to be applied to MSDTC Volume
/TCPPortDTC
13300
Port for DTC communication
Index
External Services Provisioning
Parameter
Default
Comment
/SetupAnalytics:
(none)
Setup External Advanced Analytics Server
/SetupPython:
(none)
Install Python Services
/SetupRServer:
(none)
Install R Services
/ExtSvcAccount:
(none)
Name of External Services Service Account
/ExtSvcPassword:
(none)
Password for External Services Service Account
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/SQLSharedMR:
Yes
Configure R Services to be shared with SQL Server
Index
Parameter
Default
Comment
/SetupSQLDBFS:
Yes
Install SQL Server Filestream components
/FileStreamLevel:
2
Level of Filestream provisioning
/FileStreamShareName:
FS(instance)
Share Name for Filestream
/LabDataFS:
"FS Data"
Volume Label to be applied to SQL FileStream Volume
/VolDataFS:
(VolData)
Volume to host FileStream files
Index
Full Text Search Provisioning
Parameter
Default
Comment
/SetupSQLDBFT:
Yes
Install SQL Server Full Text Search components
/SetupSemantics:
Yes
Install Semantic Search
/FTSVCAccount:
"NT Service"
Name of Full Text Search Account
/FTSVCPassword:
(none)
Password for Full Text Search Account
/VolDataFT:
(VolData)
Volume to host Full Text files
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/LabDataFT:
"FT Data"
Volume Label to be applied to SQL Full Text Volume
/SetupFT:
Yes
Configure SQL Server Full Text options (if installed)
Index
Management Data Warehouse Provisioning
Parameter
Default
Comment
/SetupManagementDW:
(none)
Configure Management Data Warehouse
/ManagementServer:
(none)
Name or Alias of server to host Management Data Warehouse
/MDWAccount:
(none)
Name of MDW Data Collector Proxy Account
/MDWPassword:
(none)
Password for MDW Data Collector Proxy Account
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/ManagementDW:
ManagementDW
Database name for Management Data Warehouse
Index
Parameter
Default
Comment
/NetNameSource:
Cluster
Source for renaming Network Adaptor names
/TCPPort:
1433
Port for SQL Server
/TCPPortDAC:
1434
Port for SQL Server DAC
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/DisableNetworkProtocols:
0
(SQL2005 Only) Disable specified network protocols
/NPEnabled:
1
(SQL2008 and above) Enable Named Pipes Protocol
/TCPEnabled:
1
Enable TCP Protocol
Index
Parameter
Default
Comment
/SetupPolyBase:
(none)
Install PolyBase
/PBDMSSvcAccount:
(none)
Name of PolyBase Data Mover Service Account
/PBDMSSvcPassword:
(none)
Password for PolyBase Data Mover Service Account
/PBEngSvcAccount:
(none)
Name of PolyBase Engine Service Account
/PBEngSvcPassword:
(none)
Password for PolyBase Engine Service Account
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/PBPortRange:
"16450-16460"
PolyBase Port Range
/PBScaleout:
True
Enable Scaleout for PolyBase
/PBDMSSvcStartupType:
Automatic
PolyBase Data Mover Service startup type
/PBEngSvcStartupType:
Automatic
PolyBase Engine Service startup type
Index
Parameter
Default
Comment
/SetupSQLDBRepl:
Yes
Install SQL Server Replication components
/SetupDistributor:
No
Setup SL Server Replication Distributor Database
/DistributorDatabase:
Distribution
Name of Replication Distribution database
/DistributorPassword:
(saPwd)
Password for Replication Distribution
Index
Service Pack and Cumulative Update Provisioning These parameters are relevant only for /Type:FIX processing and when installing SQL 2008 R2 and below
Parameter
Default
Comment
/SetupSP:
Yes
Install SQL Server Service Pack
/SetupSPCU:
Yes
Configure SQL Server Cumulative Update
/SetupSPCUSnac:
Yes
Configure SQL Server Native Client update
/SPLevel:
(varies)
Desired Service Pack Level. Varies dependent on SQL Version
/SPCULevel:
(varies)
Desired Cumulative Update Level. Varies dependent on SQL Version
Index
Parameters that can be added to the Basic Install in order to provision SQL Agent:
Parameter
Default
Comment
/AgentJobHistory:
500
Number of history records to be kept for a given SQL Agent Job
/AgentMaxHistory:
20000
Maximum number of Job History records to be kept
/AgtSvcAccount:
(SqlSvcAccount)
Name of SQL Agent Service Account
/AgtSvcPassword:
(SqlSvcPassword)
Password for SQL Agent Service Account
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/SetupSQLDBAG:
Yes
Install SQL Agent components
/SetupSQLAgent:
Yes
Configure SQL Agent Properties
/AGTSvcStartupType:
Automatic
(SQL2008 and above) SQL Agent service startup type
/AGTAutoStart:
1
(SQL2005 only) SQL Agent service startup type
Index
SQL Server Configuration Provisioning Parameters that control SQL Server configuration
Parameter
Default
Comment
/SetupGovernor:
(none)
Setup Resource Governor
/SetupNonSaAccounts:
Yes
Configure DBA Non-Sysadmin Group
/SetupParam:
Yes
Configure SQL Startup Parameters
/SetupPBM:
Yes
Configure Policy Based Management
/SetupSnapshot:
Yes
Configure Snapshot Isolation
/SetupSQLDebug:
(none)
Setup Stored Procedure Remote Debugging ports
/SetupStretch:
No
Configure Azure Stretch Database support
/CollationSQL:
"Latin1_General_CI_AS"
Collation setting for SQL DB Engine
/SetCLREnabled:
1
Enable CLR
/SetCostThreshold:
20
Cost Threshold for Parallelism
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/SetupDisableSA
Yes
Disable sa account
/SetupServices:
Yes
Configure SQL Service Recovery
/SetupServiceRights:
Yes
Configure service access rights
/SetupSQLInst:
Yes
Configure SQL Instance Properties
/SetupSQLServer:
Yes
Configure SQL Server Surface Area
/SetupSysDB:
Yes
Configure System Database options
/SetupSysIndex:
Yes
Configure additional indexes for System Databases
/SetupSysManagement:
Yes
Configure System DB Management
/AuditLevel:
2
Level of auditing within SQL Server
/MaxDop:
(calculated)
Maximum Degree of Parallelism (based on number of Processors)
/NumErrorLogs:
30
Number of SQL Server Errorlogs to be retained
/NumTF:
20
Maximum number of Trace Flag (/TFnn:) parameters to configure
/SetOptimizeForAdHocWorkloads:
1
Enable Optimize for Ad-Hoc Workloads
/SetRemoteAdminConnections:
1
Enable Remote Management of SQL Server
/SetRemoteProcTrans:
0
Enable MSDTC support for Remote Procedure execution
/SqlMaxMemory:
(calculated)
Maximum memory for SQL Server
/SqlMinMemory:
(calculated)
Minimum memory for SQL Server
/TallyCount:
1000000
Number of rows for Tally table
/TCPPortDebug:
(various)
Ports for Visual Studio SQL Debug. Ports vary by VS version
/TFnn :
(none)
Additional SQL Server Startup Trace Flags (nn is 01 to (NumTF))
Index
Parameters that provision the various services associated with SQL Server. These can normally be left at their default values.
Parameter
Default
Comment
/AgtSvcAccount:
(SqlSvcAccount)
Name of SQL Agent Service Account
/AgtSvcPassword:
(SqlSvcPassword)
Password for SQL Agent Service Account
/CltSvcAccount:
(none)
Name of Distributed Replay Client Service Account
/CltSvcPassword:
(none)
Password for Distributed Replay Client Service Account
/CtlrSvcAccount:
(none)
Name of Distributed Replay Controller Service Account
/CtlrSvcPassword:
(none)
Password for Distributed Replay Controller Service Account
/ExtSvcAccount:
(none)
Name of External Services Service Account
/ExtSvcPassword:
(none)
Password for External Services Service Account
/PBDMSSvcAccount:
(none)
Name of PolyBase Data Mover Service Account
/PBDMSSvcPassword:
(none)
Password for PolyBase Data Mover Service Account
/PBEngSvcAccount:
(none)
Name of PolyBase Engine Service Account
/PBEngSvcPassword:
(none)
Password for PolyBase Engine Service Account
/SqlSvcAccount:
(none)
Name of SQL DB Service Account
/SqlSvcPassword:
(none)
Password for SQL DB Service Account
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/AGTSvcStartupType:
Automatic
(SQL2008 and above) SQL Agent service startup type
/AGTAutoStart:
1
(SQL2005 only) SQL Agent service startup type
/BrowserSvcAccount:
"NT Service"
Name of SQL Browser Service Account
/BrowserSvcPassword:
(none)
Password for SQL Browser Service Account
/BrowserSvcStartupType:
Manual
(SQL2008 and above) SQL Browser service startup type
/CltStartupType:
Manual
Distributed Replay Controller Service startup type
/CtlrStartupType:
Manual
Distributed Replay Controller Service startup type
/FTSVCAccount:
"NT Service"
Name of Full Text Search Account
/FTSVCPassword:
(none)
Password for Full Text Search Account
/PBDMSSvcStartupType:
Automatic
PolyBase Data Mover Service startup type
/PBEngSvcStartupType:
Automatic
PolyBase Engine Service startup type
/SQLAutoStart:
1
(SQL2005 only) SQL DB service startup type
/SQLSvcStartupType:
Automatic
(SQL2008 and above) SQL DB service startup type
/SQLBrowserAutoStart:
0
(SQL2005 only) SQL Browser service startup type
/SQLWriterAutoStart:
0
(SQL2005 only) SQL VDI Writer service startup type
/TelvcAccount:
(none)
Name of SQL Telemetry Service Account
/TelSvcPassword:
(none)
Password for SQL Telemetry Service Account
/TelSvcStartupType:
Manual
SQL Telemetry service startup type
/WriterSvcStartupType:
Manual
(SQL2008 and above) SQL VDI Writer service startup type
Index
Parameters that can be added to the Basic Install in order to provision tempdb.
Parameter
Default
Comment
/SetupTempDb:
Yes
Configure tempdb options
/SetMemOptTempdb:
(none)
(SQL2019 and above) Set to ON to enable Memory Optimised Tempdb
/SqlTempdbFileSize:
"200 MB"
Size of tempdb data files
/SqlTempdbLogFileSize:
"50 MB"
Size of tempdb log file
/VolLogTemp:
(VolLog)
Volume to host tempdb log file
/VolTemp:
(VolData)
Volume to host tempdb data files
The following parameters can normally be left at their default values:
Parameter
Default
Comment
/SqlTempdbFileCount:
(calculated)
Number of files for tempdb
/LabLogTemp:
TempLog
Volume Label to be applied to volume hosting tempdb log file
/LabTemp:
TempData
Volume Label to be applied to volume hosting tempdb data files
Index
Version Upgrade Provisioning Parameters that can be added to the Basic Install in order to provision an upgrade to a new version of SQL Server.
Parameter
Default
Comment
/FailoverClusterRollOwnership:
(none)
Automatically Fail Over cluster during SQL Version upgrade
/FTUpgradeOption:
(none)
Upgrade Option for Full Text Search
/UseSysDB:
(none)
Use existing System Databases in upgrade
Index
Copyright FineBuild Team © 2018 - 2021. License and Acknowledgements