Page Index - RoboDurden/Hoverboard-Firmware-Hack-Gen2.x GitHub Wiki

87 page(s) in this GitHub Wiki:

• Home
• Welcome to the Hoverboard-Firmware-Hack-Gen2.x wiki!
• Lets get started
• Try the interactive board identifier
• Analog gate drivers:
• 2.1.1
• 2.1.2
• 2.1.8
• 2.1.11
• 2.1.13
• 2.1.14
• 2.1.16 (only change to 2.0 is Hall_A <-> Hall_C)
• 2.1.6 (todo)
• 2.1.12
• 2.2.1
• 2.2.2 (todo)
• 2.2.3
• 2.2.5 (todo)
• 2.2.7 = Gen1 board (only using left or right motor)
• Three Gate Driver Chips:
• 2.1.3 (K8 = 32 pin MCU package)
• 2.1.5 (todo)
• 2.1.9 (todo)
• 2.1.21 (todo)
• 2.1.7 + 2.1.7.1
• 2.1.22
• 2.3.1 (todo)
• 2.3.2
• 2.3.3 WARNING: it seems you can only program with serial connection to PA9/PA10 with Boot0 cut and pulled to 3.3V
• 2.2.4 (XIAOMI Mijia M365 board)
• 2.4.1 (MM32SPIN05PF = 32 kB)
• 2.4.2 (MM32SPIN05PF = 32 kB)
• 2.4.3 (MM32SPIN06PF = 64 kB)
• 2.4.5 (MM32SPIN05PF = 32 kB)
• One Gate Driver Chip:
• 2.1.4
• 2.1.18
• 2.1.20
• 2.1.15
• 2.1.17
• 2.6.1
• adding NRST on stlink v2 clones
• Please reload this page
• AutoDetect Pins
• Please reload this page
• CH552 as CMSIS‐DAP link
• Please reload this page
• Control Methods
• Please reload this page
• Control power of the board programatically
• Please reload this page
• Converting St Link V2 to J‐LInk
• Please reload this page
• ESP8266 as CMSIS‐DAP link
• Please reload this page
• Example page for creating new board layout
• Please reload this page
• find your layout
• Please reload this page
• Flash via Keil
• Please reload this page
• Flash via PYocd
• Please reload this page
• Flash via StLink Utilities
• Please reload this page
• Flash via Stm32 Cube Programmer
• Please reload this page
• Flash via st‐flash.exe
• Please reload this page
• HOVER‐1 DRIVE
• Please reload this page
• How to submit a new layout
• Please reload this page
• MM32SPIN05PF‐Layout 2.8
• Please reload this page
• old README project page
• Please reload this page
• Serial flashing method
• Please reload this page
• Tips for programming, debugging and flashing
• Please reload this page
• Troubleshooting: motor not spinning
• Please reload this page
• Using ElaphureLink with ESP‐DAP
• Please reload this page
• Using USPIP with ESP‐DAP
• Please reload this page