ATN - QB64Official/qb64 GitHub Wiki

The ATN or arctangent function returns the angle in radians of a numerical TAN value.

Syntax

radianAngle = ATN(tangent!)

Parameter(s)

  • The return is the tangent!'s angle in radians.
  • tangent! SINGLE or DOUBLE values are used by the function. EX:Pi = 4 * ATN(1)

Description

  • To convert from radians to degrees, multiply radians * (180 / �).
  • The tangent value would be equal to the tangent value of an angle. Ex: TAN(ATN(1)) = 1
  • The function return value is between -� / 2 and � / 2.

Example(s)

When the TANgent value equals 1, the line is drawn at a 45 degree angle (.7853982 radians) where SIN / COS = 1.


SCREEN 12
x = 100 * COS(ATN(1))
y = 100 * SIN(ATN(1))
LINE (200, 200)-(200 + x, 200 + y) 

ATN can be used to define π in SINGLE or DOUBLE precision. The calculation cannot be used as a CONSTant.


Pi = 4 * ATN(1)   'SINGLE precision
Pi# = 4 * ATN(1#) 'DOUBLE precision
PRINT Pi, Pi# 

Note: You can use QB64's native _PI function.

Finds the angle from the center point to the mouse pointer.


SCREEN _NEWIMAGE(640, 480, 32)
x1! = 320
y1! = 240

DO
  PRESET (x1!, y1!), _RGB(255, 255, 255)
  dummy% = _MOUSEINPUT
  x2! = _MOUSEX
  y2! = _MOUSEY
  LINE (x1, y1)-(x2, y2), _RGB(255, 0, 0)
  LOCATE 1, 1: PRINT getangle(x1!, y1!, x2!, y2!)
  _DISPLAY
  _LIMIT 200
  CLS
LOOP UNTIL INKEY$ <> ""
END

FUNCTION getangle# (x1#, y1#, x2#, y2#) 'returns 0-359.99...
IF y2# = y1# THEN
  IF x1# = x2# THEN EXIT FUNCTION
  IF x2# > x1# THEN getangle# = 90 ELSE getangle# = 270
  EXIT FUNCTION
END IF
IF x2# = x1# THEN
  IF y2# > y1# THEN getangle# = 180
  EXIT FUNCTION
END IF
IF y2# < y1# THEN
  IF x2# > x1# THEN
    getangle# = ATN((x2# - x1#) / (y2# - y1#)) * -57.2957795131
  ELSE
    getangle# = ATN((x2# - x1#) / (y2# - y1#)) * -57.2957795131 + 360
  END IF
ELSE
  getangle# = ATN((x2# - x1#) / (y2# - y1#)) * -57.2957795131 + 180
END IF
END FUNCTION 

See Also