Menu - Project-Stinger/Main GitHub Wiki

The menu can be entered by pushing the joystick Up-Right while on the Home Screen. The menu can be navigated with the joystick as well.

  • Right enters into a submenu, starts changing the focused setting (basically an Enter key)
  • Left exits the current submenu or the currently selected setting (basically a back button)
  • Up and Down navigate through the settings, or change the value of one when entered

If the joystick seems to not register the moves properly, consider calibrating it.

Tip

Some settings are profile dependent, while others are global. Profiles (up to 5) can be used to quickly swap between e.g. burst and single shot modes. Profile dependent settings have a dot in the profile color on the right side, while global settings have a white dot on the right side.

Tip

To change values quicker, you can also use the same method used to change the dart count, to change the value of a setting. Just push the joystick Up-Left and then rotate it to the desired value. Clockwise for increase, and counter-clockwise for decrease.

Main Menu

  • Motors: Contains settings about the motor speed and spinup sequence
  • Firing: Contains settings about the pushing procedure, like burst or single shot
  • Battery: Battery parameters like cell count and warnings
  • User Interface: Change how you operate the blaster
  • Profile: Profile management
  • Device: Boot Screen, Hardware Info, Safety settings and more
  • Tournament Mode: Enter the tournament mode, where you can limit certain blaster settings
  • Save: Save the current settings and exit the menu
  • Discard: Discard current changes and exit the menu

Note

Some special programs automatically save the settings (e.g. motor remapping), so be sure to discard beforehand if you have some changes you do not want to be saved!

The Stinger Documentation by Bastian2001 and Just4Stan is licensed under CC BY-NC-SA 4.0

⚠️ **GitHub.com Fallback** ⚠️